Tutorials
GA Drawings for Precasters
This video shows some of the GA drawings basics in Tekla Structures.
October 30, 2019
by Tekla User Assistance
Wall Layout for Precasters
This video shows how to utilize the Wall Layout tool in Tekla Structures.
Wall Layout tools is a set of components that you can use for creating and modifying all common types of concrete walls, such as solid precast panels from single layers to double walls and sandwich walls, and different wall structures that are cast on the site. The wall structure may contain several layers, for example, structural layers, insulation, void, and surface treatments. You can use direct modification to flexibly change the wall geometry, layer offsets, openings, and seam lines.
October 30, 2019
by Tekla User Assistance
Custom Parts for Precasters
This video shows how to create a part custom component in Tekla Structures.
October 30, 2019
by Tekla User Assistance
Custom Connections for Precasters
This video shows how to create a connection custom component in Tekla Structures.
October 30, 2019
by Tekla User Assistance
Numbering for Precasters
This video shows some of the numbering basics in Tekla Structures.
October 30, 2019
by Tekla User Assistance
Anchor Rods for Precasters
This video shows how to utilize the Anchor Rods in Tekla Structures.
October 30, 2019
by Tekla User Assistance
Floor Layout for Precasters
This video shows how to utilize the Floor Layout tool in Tekla Structures.
Floor Layout creates floors built of precast filigree and hollow core slabs. The floors may contain several layers, such as precast slabs, insulation and a cast-in-place topping. Floor Layout is most useful for non-rectangular floors that contain one or more openings that split slabs into many pieces, and when slab widths are not constant on the whole floor area. You can modify the floors using direct modification.
October 30, 2019
by Tekla User Assistance
Top in Form for Precasters
This video showcases Top in Form for Tekla Structures.
October 30, 2019
by Tekla User Assistance
New extension: Advanced mesh reinforcement
Tekla Structures 2019i introduces an advanced detailing tool for creation of optimized mesh reinforcements to concrete walls and slabs.
October 8, 2019
by Tekla User Assistance
Changes in orthogonal snapping
Tekla Structures 2019i introduces changes in orthogonal snapping behavior. The orthogonal snap points have the lowest priority among the snap points. If Tekla Structures detects any other possible snap point than an orthogonal point, that is used instead of the orthogonal snap point.
October 8, 2019
by Tekla User Assistance
Improved search in the property pane
Starting from Tekla Structures 2019i, the search in the property pane now finds all properties and user-define attributes (UDAs) that are available for the object type. Also the copying of properties has been improved: you can now press Enter to finish the copying of properties instead of clicking the Modify button.
October 8, 2019
by Tekla User Assistance
Lofted slab
Model ramps and other complex concrete shapes using this new functionality in Tekla Structures 2019i.
October 8, 2019
by Tekla User Assistance
New settings for section views
New in Tekla Structures 2019i: In single part and assembly drawings on the Attributes tab of the Section view properties, there is a new Size check box for the new Fit by parts setting and the existing settings Section depth and Distance for combining cuts. Now you are able to set Fit by parts for all section views in drawing properties before the drawing creation.
October 8, 2019
by Tekla User Assistance
Tips & tricks: AutoConnections and AutoDefaults
This month we give a brief overview of the Autoconnection/Autodefaults settings in Tekla Structures and how they work. With more people estimodeling than ever before, configuring these settings to your companies standards means more accurate estimates and quicker connections in your building. Properly done, these can even be used to automate connecting your production models as well.
October 8, 2019
by Tekla User Assistance
Interoperability improvements
Tekla Structures 2019i contains improvements in reference models, IFC object conversion, and IFC export.
Improved IFC object conversion of steel contour plates
IFC2x3 export for radial grids
New 3D DGN export v8 format
Renewed 3D DWG export
October 8, 2019
by Tekla User Assistance
Printing to multiple printers
Tekla Structures 2019i introduces possibility to print to more than one printer in one go based on the paper size of each selected drawing. When printing to multiple printers you typically have different printers for handling different paper sizes. Tekla Structures automatically selects the appropriate printer for each drawing.
October 8, 2019
by Tekla User Assistance
Predefined viewing angles
Tekla Structures 2019i introduces possibility to show model views, assemblies, and components in different view angles.
October 8, 2019
by Tekla User Assistance
View improvements - frames hidden
The drawing view frames are now hidden until you move the cursor over the view.
October 8, 2019
by Tekla User Assistance
Snap tooltips for snap points
Tekla Structures 2019i introduces tooltips for snapping. When you start a command that requires picking points and you move the mouse pointer over objects in the model, Tekla Structures displays a snap tooltip that shows the name of the snap point.
October 7, 2019
by Tekla User Assistance
Snapping color changes
Tekla Structures 2019i introduces new colors for snapping.
October 7, 2019
by Tekla User Assistance