Fixed defect

Last updated March 6, 2019 by Tekla User Assistance


Previously, the Move linear command did not move objects which were selected with Object by phases in Phase Managertool that is used for assigning model objects to phases

The phase content can be viewed and modified in the phase manager.

The phase manager can be used to lock and unlock model objects.

See object lock.

. Only the gridmodeling aid that represents a three-dimensional complex of intersecting grid planes or intersecting grid planes and curved grid surfaces

The grid is defined by coordinates in 3D space. It is shown two-dimensionally on the view plane by dash-and-dot lines. A grid can be rectangular or radial.

It is possible to have more than one grid in a model. For example, a large-scale grid for the entire structure, and smaller grids for some detailed sections.

It is also possible to show grids and grid line labels in drawings, and to modify how they are shown in the drawings.

that was included in the phase was moved.

Now, if the grid is the only selected object, it is moved. If also other objects are selected, such as parts, bolts, welds and so on, the grid does not move but the other objects move.

Development area: 

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.