TSAC-3396

Fixed defect

Last updated June 10, 2020 by Tekla User Assistance tekla.documentation@trimble.com

TSAC-3396

Hollowcore reinforcement strands (60) has two improvements:

In the .dat file, it is now possible to add additional grids for strandreinforcement that represents a group of wires spun together

patterns. The new grids can be assigned to a strand pattern by adding the stand pattern name after the gridmodeling aid that represents a three-dimensional complex of intersecting grid planes or intersecting grid planes and curved grid surfaces

The grid is defined by coordinates in 3D space. It is shown two-dimensionally on the view plane by dash-and-dot lines. A grid can be rectangular or radial.

It is possible to have more than one grid in a model. For example, a large-scale grid for the entire structure, and smaller grids for some detailed sections.

It is also possible to show grids and grid line labels in drawings, and to modify how they are shown in the drawings.

, for example, Profile-name'_GRID_'Strand-pattern'.
 
Also, the Pull value boxes on the Strand pattern tab are now enabled when the distances are defined by an external file. It is now possible to overwrite the pull of a strand. If the pull value is empty, the pull values of the .dat file are used.

Development area: 
Concrete components

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.