XS_ASSOCIATIVE_CHANGE_HIGHLIGHT_SYMBOL (Example)
Not version-specific
Tekla Structures
Environment
India
Question:
Is there any example to understand about the advanced option XS_ASSOCIATIVE_CHANGE_HIGHLIGHT_SYMBOL?
Answer:
Yes, Please follow the below steps to understand about this advanced option.
1) Create a beam which is 2000 mm length
2) Create a GA drawing (Plan), it will be look like as below, then close this drawing.
3) Modify this beam’s length to 1000 mm length
4) Open the GA drawing , dimension change symbol will be appear as below
The default value is AssociativityAnchor@1 (a cloud).
5) Go to advanced option , then change the XS_ASSOCIATIVE_CHANGE_HIGHLIGHT_SYMBOL=xsteel@0
6) Reopen this drawing, now you will get the dimension change symbol as below
Additional info:
xsteel@0
xsteel is a symbol file name,
0 is a symbol number, you can use any symbol file & number as per your requirement.
Is there any example to understand about the advanced option XS_ASSOCIATIVE_CHANGE_HIGHLIGHT_SYMBOL?
Answer:
Yes, Please follow the below steps to understand about this advanced option.
1) Create a beam which is 2000 mm length
2) Create a GA drawing (Plan), it will be look like as below, then close this drawing.
Image
3) Modify this beam’s length to 1000 mm length
4) Open the GA drawing , dimension change symbol will be appear as below
Image
The default value is AssociativityAnchor@1 (a cloud).
5) Go to advanced option , then change the XS_ASSOCIATIVE_CHANGE_HIGHLIGHT_SYMBOL=xsteel@0
6) Reopen this drawing, now you will get the dimension change symbol as below
Image
Additional info:
xsteel@0
xsteel is a symbol file name,
0 is a symbol number, you can use any symbol file & number as per your requirement.