Support articles

Tekla Structures 2019 US environments Release Notes

Table of Contents Folder Structure Reorganization Common to all US Roles Steel Detailing Role Partner Developer Notes Administrator Release Notes 1. Folder Structure Reorganization 1.1 Environment folders We have modified the environment to now contain both US Imperial and US Metric within one environment. See image below for reference, the environments have now been combined into one environment called USA. Within the USA environment, we have 3 main folders, one which contains shared files between both US Imperial and US Metric called “Common” and then specific folders for settings that
by Tekla Support US

Complex Proxy or Custom Objects in DWG or DXF import files

The first thing to check for when a DWG or DXF reference file import is not visible in Tekla Structures is that the version in which the file was exported is compatible with the version of Tekla Structures being used. See the following article titled Supported AutoCAD versions DWG import. If you have checked that the version of the DWG or DXF reference file is compatible, and there is nothing showing up still, check if the file contains proxy objects or graphics. If it does, they must be removed from the file to make it viewable in Tekla. Instructions in this article titled DWG reference file
Requires Tekla Maintenance
by Tekla Support US
  • Reference models and compatible formats
  • DWG reference file not visible
  • Supported AutoCAD versions DWG import

Magenta change clouds did not appear on drawing after a model change.

Question: I created several drawings and later I made a change to the model. I ran numbering and the drawing showed Parts modified in the Document manager. After I updated the drawing and opened it, no magenta change symbol clouds appeared.  Answer: The magenta change symbol clouds will only appear if you go into the drawing while the issue flag in the Document manager turned on. You can look at the drawing list and see which drawings have been edited and which ones have the issue flag turned on. 
Requires Tekla Maintenance
by Tekla Support US
  • magenta clouds
  • drawing change
  • model update

Vertical Columns top view are stacked instead of side by side

Question: I created an assembly drawing of a column and it appeared horizontal, but I needed it vertical. I went into the Drawing Properties>View properties>Attribute Tab. I changed the option for the Coordinate System from local to model. When I do this my top view is above the column. I would like the top view to be to the left of the column How do I change this?   Answer:  With the properties set with the Coordinate system model, you will need to Apply these settings from the Drawing properties dialog. Next, close the drawing and use the command Select part in model from the list of
Requires Tekla Maintenance
by Tekla Support US

Create a profile from a DWG file

Visible objects When you view the DWG file, ensure that only the lines that you want to convert to a profile are visible. This means that there cannot be text, dimensions, XREF objects, leader lines, etc. The only thing visible should be the actual profile shape. You can delete the additional objects, or turn off the layers that contain the additional objects. While simply turning off the layers may be an easier method to hide the unwanted objects, it is recommended to delete the unwanted objects. Once the profile is scaled up prior to the importing process, most of these objects will no
Requires Tekla Maintenance
by Tekla Support US
  • DWG
  • profile
  • profile catalog
  • catalog
  • DWG cross section

DSTV2DXF - Holes smaller than 3/8 are showing/ exporting as 1 inch

Question - Why do my holes in a DXF converted using the DSTV2DXF tool show as 1" when really they are 3/8"? Answer -  Our DXF convertor defaults holes 3/8 and smaller to use a point value of 1" by default. The layer on the hole still says 3/8" which is what most plasma tables use. For the machines that use the actual line or rather circle size you can adjust it so that the hole size is the actual size from the model. To change this you will need to go to "C:\Program Files\Tekla Structures\<version>\nt\dstv2dxf" or "C:\TeklaStructures\<version>\nt\dstv2dxf" (depending on
Requires Tekla Maintenance
by Tekla Support US
  • dstv2dxf hole
  • dxf hole size
  • dxf hole

Drawing Takes a Very Long Time to Open

Question: I am working on a project with several Object-level settings and takes around 20 minutes to open the drawing. How can I make sure I open this drawing more quickly? Answer: Drawing speed can be affected by how many lines are shown on a drawing. Lines can be hidden behind other lines if a view depth is set to high. Changing the advanced options shown below can help speed up drawing opening times if this is the case.  Set these like below: XS_DRAW_CAST_UNIT_INTERNAL_LINES=FALSE ->TRUE XS_DRAW_CAST_PHASE_INTERNAL_LINES=FALSE ->TRUE XS_HIDDEN_REMOVE_DOUBLE_LINES=TRUE ->FALSE
Requires Tekla Maintenance
by Tekla Support US
  • drawing speed
  • drawing opening
  • speed
  • drawing

Temporary Reference Points

To create a temporary reference point, you will first want to make sure you have your 'nearest to' snap function on. Then you will want to activate a command, say for beams.  So with nearest to selected and in a beam (or relative part) command, hold down CTRL and then select the origin point, in this case at the intersection of the end of the beam and the gridline, then start tracking upwards along the grindline. You can let off of CTRL once you select your starting point, then once you get to your desired distance you can select that point, which will be the first point of your beam. Then
Requires Tekla Maintenance
by Tekla Support US
  • reference point
  • snap to reference
  • reference
  • snap
  • tracking
  • track

Centralized distribution of Tekla Structures 2019

Introduction Tekla Structures consists of the following installations: Tekla Structures software installation  Tekla Structures environmentregion- or company-specific settings and information that are predefined in Tekla Structures or that are defined by the userTo be able to use Tekla Structures, the user must install the software and for region-specific settings at least one Tekla Structures environment. The software installation includes the common and blank project environments and the global settings. The common environment and global settings form the basis for all other
by Software Deployment
  • centralized distribution
  • silent install
  • administrative install
  • admin install
  • prerequisites
  • install
  • installer

Running multiple Tekla Structures sessions at the same time

Question: Can I run multiple Tekla Structures sessions from the same version at the same time?  Answer: We do not recommend using multiple Tekla Structures sessions. If you open two Tekla Structures sessions the second one cannot use .NET interface and you might see this warning: "Tekla Structures could not initialize .NET interface, another Tekla Structures is probably running.". Features implemented with Tekla Open API are not working in the second session. If you for example try printing from two Tekla Structures sessions at the same time, it is either only working for the first
Requires Tekla Maintenance
by Tekla Global Support

Check Dimension point validity

Question: The option “Check dimension Point Validity” is not available in the Tekla version 2018. Please advise how to activate this command. Answer: We have enhanced the command Associativity symbol in TS 17.0 & later, At that same time, the commands Check Dimension point validity & Remove Dimension point invalidity Symbol removed from TS version 18.0, both commands are no longer available. Check Dimension point validity not showing the associativity symbol for the newly creating dimensions if you did not click the same every time. In the new Associativity symbol (Shift+A
Requires Tekla Maintenance
by Trimble Solutions India
  • Check dimension Point Validity
  • Remove Dimension point invalidity Symbol
  • Associativity symbol
  • Associativity symbols
  • associativity
  • symbol
  • Shift A

Point color

Question: In my model, few points are showing in blue colour & rest of the points are showing in red colour. I am working in TS2018. I observed that the same construction point which shown in blue colour in one view is showing as red colour in another view. What is the reason of this colour change for the same point in differnet views? Answer: In TS2018, You will get the point colour as blue if you are placing your point in plane and you will get the point colour as red if you are placing your point , out to plane. Because of the above reason, points are appearing in different
Requires Tekla Maintenance
by Trimble Solutions India
  • point color
  • Blue
  • red
  • yellow
  • view plane
  • plane
  • different colour
  • colour

How to find total number of parts in the selected assembly?

Question: Is there any way to get the total number of parts of selected assembly without creating any reports? Answer: Yes, you can get the total number of parts of selected assembly by clicking the “ALT” key & by selecting any one of part of that particular assembly. The total number of parts will be shown in the bottom right corner of the status bar, for an example Ensure that any one of the Main selection switch should be switch on.
Requires Tekla Maintenance
by Trimble Solutions India
  • Find number of parts in assembly
  • find number of parts
  • ALT
  • total number of parts
  • parts in assembly
  • assembly

Display the numbering result dialog box

Question: How to display the numbering result dialog box before it save in model? I can get this dialog box for few models & the same is not displaying for some other models. Answer: You should select the check box of Synchronize numbering with the master model(save-numbering-save) in the Numbering Setup options to get the numbering result dialog box. Ensure that the advanced option XS_DISABLE_CANCEL_DIALOG_FOR_SAVE_NUMBERING_SAVE should be False.
Requires Tekla Maintenance
by Trimble Solutions India
  • numbering
  • Synchronize numbering with the master model
  • dialog box
  • display
  • Numbering result

Is it possible to find the system components with respect to component symbol colors like red, yellow?

Question: Is it possible to find the system components symbol which are in Red, Yellow colours in the model to check further? Answer: Yes, it is possible to find the system components with respect to connection errors. You need to use the template attribute CONNECTION_ERROR in filters, reports & organizer as per your convenient to achieve your requirement. You can download the filters for your reference  
Requires Tekla Maintenance
by Trimble Solutions India
  • connection error
  • error
  • green
  • red
  • yellow
  • component error
  • component symbol
  • symbols
  • connection symbol

How to search many components in Applications and Components?

Question: How to search many connections in new Applications and Components (version 21.1 onwards)? In previous versions, we can get the same by searching the connection numbers by typing the connection numbers with space, for an example 141 17 (141 space 17) Answer: You can achieve your requirement by typing the connection numbers with “OR” in the search option among the connection numbers. For an example, type 141 OR 17 OR 144 (141 space OR space 17 space OR space 144)Note: You can use “or” otherwise “OR” during the search.
Requires Tekla Maintenance
by Trimble Solutions India
  • search many components
  • Search
  • Find in Applications and Components
  • Applications and Components
  • Component catalog
  • connections
  • Applications & components

How to download the release notes of Tekla Structures version?

Question: How to download the release notes as a PDF for TS2018? We downloaded the same from “What’s new in this release” till Tekla Structures version 21.1 & prior to this version when we start to create a new model. Answer: You can download the Release notes from Tekla structures 21.0 onwards. Note: “Upgrade to this version” will provide you the “Release notes” from version 2018 onwards in this link.
Requires Tekla Maintenance
by Trimble Solutions India
  • Release notes
  • Help files
  • New version

How to transfer the Plate profiles to Smart3D?

Question: How to transfer the Plate profiles from Tekla Structures to Smart3d by using the Export to Smart3D link? For an example, PL32*250 Answer: You need to map RS* profiles of Smart3D with PL* profiles of Tekla Structures. For an example, You need to map the plate profile in “External name” as “RS32X250” in “Specify mappings “ in the “Export to SP3D link” dialog box during export if your plate profile is PL32*250 in “Tekla Structures Name” Note: You should have RS32X250 in your Smart3d profile catalogue. Click “Save Changes for Next Time” in the “Export to SP3D link” if you want
Requires Tekla Maintenance
by Trimble Solutions India
  • Export to Smart3D
  • Smart3D
  • SP3D
  • import
  • export
  • .stp
  • cis2

How to export black and white pdf drawings and only cloud marks in Red ?

Question How to export black and white pdf drawings and only cloud marks in Red ? Answer Set color of cloud which is not used in the drawing for any other object.  In below case Magenta color is used for cloud.    then go to Print Drawings command and set Color option as color, see below.   Then go to Line properties tab and change output color for all colors as black except color of cloud (Magenta) To change particular output color just click it and then you can select other color.   Then output of the pdf drawing will come as below.    Same thing can be used for cloud and comments. Add
Requires Tekla Maintenance
by Trimble Solutions India
  • PDF Drawing
  • cloud
  • black and white
  • drawing output
  • plot
  • print

Negative Y co-ordinates for imported STAAD file

Question Why values of Y co-ordinates are in negative when Tekla co-ordinates are compared with staad co-ordinate after importing a Staad file into Tekla using Import FEM settings? Answer This happens because co-ordinate systems of Staad and Tekla Structures are different. Staad axes in plan -->   Tekla axes in plan -->   So while importing Staad file, Tekla Structures matches origin as per Staad and X axis as per Staad, because of which positive z axis in Staad becomes negative Y axis in Tekla and hence positive Z coordinates of staad will be negative Y co-ordinates in Tekla Structures
Requires Tekla Maintenance
by Trimble Solutions India
  • STAAD Import
  • FEM Import
  • co-ordinates