Finnish Environment Project settings (UDA)


Software version: Not version-specific

Last updated September 29, 2020 by Area Finland Service tekla.support.fi@trimble.com

Environment: 
Finland

Finnish Environment Project settings (UDA)

The Finnish environment project settings consists of multiple user-defined attributes, which control the format of drawing templates and reports as well as some of the custom properties. The following tables list the project level user-defined attributes along with decriptions on how they are used and which templates, reports or custom properties they affect.

For most of the user-defined attributes used in drawings, there is an option to use the project level setting or to set the value separately on drawing level.

FI-Drawing settings / FI-Piirustusasetuksia 

These user-defined attributes are used to control multiple features related to drawings and custom properties.
 
Label UDA Description Affected templates, reports and custom properties
Drawing number type
Piir. nro tyyppi
P_DR_NUMBER_TYPE Sets the drawing number type. When RIL 229 -setting is used, the drawing number is generated based on the instructions by RIL, otherwise a drawing specific  number is used. ALL_Frame_Outside.tpl
ALL_Title_designer.tpl
Frame_2xA3.tpl
Frame_3xA3.tpl
Frame_4xA3.tpl
Frame_5xA3.tpl
G_Detail_A4.tpl
Mid_Title_designer.tpl
D_Drawing_list.Excel.rpt
Revision template
Muutostaulukko
P_N_OF_REV_SIGNATU Sets the number of signatures for each revision (1-3) or hides the revision table altogether. ALL_Revision.tpl
- number of rows
- rivien lukumäärä
P_N_OF_REV_LINES Sets the maximum number of revisions listed in the revision table. If the number is limited, only the latest revisions are listed. If left blank, all revisions are listed. ALL_Revision.tpl
Design branch
Suunnitteluala
P_DESIGN_BRANCH Sets the design branch displayed in drawings (RAK/STR, GEO, ARK/ARC). ALL_Frame_Outside.tpl
ALL_Title_customer.tpl
ALL_Title_designer.tpl
Frame_2xA3.tpl
Frame_3xA3.tpl
Frame_4xA3.tpl
Frame_5xA3.tpl
G_Detail_A4.tpl
Mid_Title_designer.tpl
Office (not in use)
Toimisto (ei käyt.)
P_OFF_LOCATION Not in use at the moment. ALL_Title_designer_logo.tpl
Language
Kieli
P_LANGUAGE Sets the template language (Finnish/English). Most templates and reports
Frame type
Raamityyppi
P_DR_FRAME_TYPE Sets the drawing frame type to construction (RAK) or mechanical (MEK). ALL_Frame_Binding.tpl
ALL_Frame_Outside.tpl
ALL_Frame_Inside.tpl
Assembly control number (ACN) P_ACN_IN_MARKS Sets the element numbering format, which is used in lists with running numbers and the element mark custom property. C_Element_running_numbers.tpl
G_Element_list_without_running_numbers.tpl
G_Element_list_with_running_numbers.tpl
CU_Element_erection.Excel.rpt
CU_Element_list.Excel.rpt
CU_Element_schedule.Excel.rpt
CUSTOM.ELEMENT_MARK
Element pos type Elementtitunnus P_ELEMENT_POS_TYPE Sets the element position number format, which is used in drawings and element custom property.

Options: 
01 CAST_UNIT_POS
02 CAST_UNIT_PREFIX+ACN
03 PREFIX or POS by DESIGN_STATUS.

ALL_Title_designer.tpl
C_Element_running_numbers.tpl
C_Embed_list.tpl
Mid_Title_designer.tpl
CUSTOM.ELEMENT_POS
CUSTOM.ELEMENT_POS.BY_DRAWING
CUSTOM.SLAB_CAST_UNIT_POS
CUSTOM.SLAB_CAST_UNIT_POS.BY_DRAWING
CUSTOM.SLAB_CAST_UNIT_MARK
 
- smallest status
- pienin status
P_STATUS_DIVIDER Sets the smallest design status that will give elements the full position number (Prefix+number) when P_ELEMENT_POS_TYPE is set to option 03. CUSTOM.ELEMENT_POS
CUSTOM.ELEMENT_POS.BY_DRAWING
CUSTOM.SLAB_CAST_UNIT_POS
CUSTOM.SLAB_CAST_UNIT_POS.BY_DRAWING
CUSTOM.SLAB_CAST_UNIT_MARK
Location source Sijainnin lähde P_LOCATION_SOURCE Sets the source for the location info. The setting is used by the location custom properties. CUSTOM.FLOOR
CUSTOM.SECTION
CUSTOM.BUILDING
Execution class
Toteutusluokka
P_EXEC_CLASS Sets the execution class displayed in drawings. A_Fabrication.tpl
G_Steel_data.tpl
Consequences class
Seuraamusluokka
P_CONSEQ_CLASS Sets the consequences class displayed in drawings. A_Fabrication.tpl
G_Steel_data.tpl
Service category
Käyttöluokka
P_SERVICE_CATEG Sets the service category displayed in drawings. A_Fabrication.tpl
G_Steel_data.tpl
Production category
Valmistusluokka
P_PROD_CATEG Sets the production category displayed in drawings. A_Fabrication.tpl
G_Steel_data.tpl
Template/Report -weights / Template/Report -painot
- Plates
- Levyt
P_PLATE_WEIGHT Sets the weight type used in templates and reports for plates.

Options:
WEIGHT_NET
WEIGHT
WEIGHT_GROSS.

A_Part_list.tpl
W_Part_data.tpl
A_Assembly_list.Excel.rpt
P_Material_list_Concrete.Excel.rpt
P_Material_list_Steel.Excel.rpt
P_Part_list_Concrete.Excel.rpt
P_Part_list_Steel.Excel.rpt
- Other parts
- Muut osat
P_OTHER_PRT_WEIGHT Sets the weight type used in templates and reports for other parts.

Options:
WEIGHT_NET
WEIGHT
WEIGHT_GROSS.

A_Part_list.tpl
W_Part_data.tpl
A_Assembly_list.Excel.rpt
P_Beam_plate_list.Excel.rpt
P_Material_list_Concrete.Excel.rpt
P_Material_list_Steel.Excel.rpt
P_Part_list_Concrete.Excel.rpt
P_Part_list_Steel.Excel.rpt
- Elements
- Elementit
P_ELEMENT_WEIGHT Sets the weight type for elements.

Options: 
01 Density * Volume
02 Unit weight * Volume.

This is currently not used as the element weight can be calculated using CUSTOM.ELEMENT_WEIGHT

-
- Unit weight [kN/m3]
- Tilavuuspaino [kN/m3]
P_UNIT_WEIGHT Sets the Unit weight used in element weight calculation when P_ELEMENT_WEIGHT is set to 02. -
Drawing titles / Nimiöt
- Authority
- Viranomaisnimiö
P_DR_TITLE_AUTHORI Sets the size of the autority table in drawings. ALL_Title_authority.tpl
- Consultant
- Suunnittelijanimiö
P_DR_TITLE_DESIGNE Sets the size of the designer table in drawings. ALL_Title_designer.tpl
ALL_Title_designer_logo.tpl
- Customer
- Asiakasnimiö
P_DR_TITLE_CUSTOME Sets the size of the customer table in drawings. ALL_Title_customer.tpl
ALL_Title_customer_logo.tpl

FI-Coordinate System Location / FI-Koordinaatiston sijainti

These user-defined attributes are used to define the coordinate system and location of the model. These user-defined attributes have become slightly outdated since the coordinate system can nowadays be set using base points.
 
Label UDA Description Affected templates, reports and custom properties
Coordinate system
Koordinaattijärjestelmä
P_COORD_SYSTEM Sets the name of the coordinate system displayed in drawings. ALL_Title_coord_sys.tpl
Level system
Korkeusjärjestelmä
P_LEVEL_SYSTEM Sets the name of the level system displayed in drawings. ALL_Title_coord_sys.tpl
Global X of model origin [m]
Mallin origon globaali X [m]
P_GLOBAL_X Sets the global X coordinate of the model origin. P_Anchor_bolt_list.Excel.rpt
Global Y of model origin [m]
Mallin origon globaali Y [m]
P_GLOBAL_Y Sets the global Y coordinate of the model origin. P_Anchor_bolt_list.Excel.rpt
Global Z of model origin [m]
Mallin origon globaali Z [m]
P_GLOBAL_Z Sets the Z global coordinate of the model origin. P_Anchor_bolt_list.Excel.rpt
Rotation angle a [°]
Kiertokulma a [°]
P_ROTATION_XY Sets the rotation angle a between local and global X-axes. P_Anchor_bolt_list.Excel.rpt

FI-Authority / FI-Viranomainen

These user-defined attributes are used for setting the details for the authority title table in drawings.
 
Label UDA Description Affected templates, reports and custom properties
District (or village)
K.osa/Kylä
P_AUTH_DISTRICT Sets the project district displayed in drawings. ALL_Title_authority.tpl
Block (or estate)
Kortteli/Tila
P_AUTH_BLOCK Sets the project block displayed in drawings. ALL_Title_authority.tpl
Building lot
Tontti/Rno
P_AUTH_BUILD_SITE Sets the project building lot displayed in drawings. ALL_Title_authority.tpl
Building permit code
Rakennusluvan tunnus
P_AUTH_BLD_PERMIT Sets the project building permit code displayed in drawings. ALL_Title_authority.tpl
Buildings numbers and codes
Rakennu(ksen/sten) numerot ja tunnukset
P_AUTH_BLD_NUMBERS Sets the project buildings numbers and codes displayed in drawings. ALL_Title_authority.tpl
Building action
Rakennustoimenpide
P_AUTH_BLD_ACTION Sets the project building action displayed in drawings. ALL_Title_authority.tpl
Drawing category
Piirustuslaji
P_AUTH_DR_CATEG Sets the drawing category displayed in drawings. ALL_Title_authority.tpl

FI-Contact info / FI-Yhteystiedot

These user-defined attributes contain the contact information for the customer and the designer used in some drawing templates and reports.
 
Label UDA Description Affected templates, reports and custom properties
Customer / Asiakas
Company
Yritys
P_CUSTOMER Sets the customer company displayed in drawings and some reports. ALL_Title_customer_logo.tpl
A_MultiAssemblyList.rpt
H_Hole_summary.rpt
CU_Valuyksikön_kokoonpanoluettelo.rpt
Street address
Osoite
P_CUST_ADDRESS
 
Sets the customer street address displayed in drawings. ALL_Title_customer_logo.tpl
Post office
Postinumero ja -toimipaikka
P_CUST_POST_OFF Sets the customer post office displayed in drawings. ALL_Title_customer_logo.tpl
Phone number
Puhelinnumero
P_CUST_PHONE Sets the customer post office displayed in drawings. ALL_Title_customer_logo.tpl
Fax
Faksi
P_CUST_FAX Sets the customer fax info displayed in drawings. ALL_Title_customer_logo.tpl
E-mail
Sähköposti
P_CUST_EMAIL Sets the customer e-mail info displayed in drawings. ALL_Title_customer_logo.tpl
Web-address
Web-osoite
P_CUST_WWW Sets the customer web-address. Currently not used in any drawings or reports. -
Designer / Suunnittelija
Company
Yritys
P_DESIGNR_OFFICE Sets the designer company displayed in drawings. ALL_Title_designer_logo.tpl
C_Title_hollow_core_slab.tpl
Street address
Osoite
P_DESIGNR_ADDRESS Sets the designer street address displayed in drawings and some reports. ALL_Title_designer_logo.tpl
CU_Ontelolaatta_kuorilaatta_tarjousvaihe_20_2v.xls.rpt
CU_Palkki_tarjousvaihe_20_2v.xls.rpt
CU_Parvekelaatta_tarjousvaihe_20_2v.xls.rpt
CU_Pilari_tarjousvaihe_20_2v.xls.rpt
CU_SW-Elementti_tarjousvaihe_20_2v.xls.rpt
CU_TT-Laatta_tarjousvaihe_20_2v.xls.rpt
CU_Väliseinä_tarjousvaihe_20_2v.xls.rpt
C_Title_hollow_core_slab.tpl
Post office
Postinumero ja -toimipaikka
P_DESIGNR_POST_OF Sets the designer post office displayed in drawings and some reports. ALL_Title_designer_logo.tpl
CU_Ontelolaatta_kuorilaatta_tarjousvaihe_20_2v.xls.rpt
CU_Palkki_tarjousvaihe_20_2v.xls.rpt
CU_Parvekelaatta_tarjousvaihe_20_2v.xls.rpt
CU_Pilari_tarjousvaihe_20_2v.xls.rpt
CU_SW-Elementti_tarjousvaihe_20_2v.xls.rpt
CU_TT-Laatta_tarjousvaihe_20_2v.xls.rpt
CU_Väliseinä_tarjousvaihe_20_2v.xls.rpt
C_Title_hollow_core_slab.tpl
Phone number
Puhelinnumero
P_DESIGNR_PHONE Sets the designer phone number displayed in drawings and some reports. ALL_Title_designer_logo.tpl
CU_Ontelolaatta_kuorilaatta_tarjousvaihe_20_2v.xls.rpt
CU_Palkki_tarjousvaihe_20_2v.xls.rpt
CU_Parvekelaatta_tarjousvaihe_20_2v.xls.rpt
CU_Pilari_tarjousvaihe_20_2v.xls.rpt
CU_SW-Elementti_tarjousvaihe_20_2v.xls.rpt
CU_TT-Laatta_tarjousvaihe_20_2v.xls.rpt
CU_Väliseinä_tarjousvaihe_20_2v.xls.rpt
C_Title_hollow_core_slab.tpl
Fax
Faksi
P_DESIGNR_FAX Sets the designer fax info displayed in drawings. ALL_Title_designer_logo.tpl
C_Title_hollow_core_slab.tpl
E-mail
Sähköposti
P_DESIGNR_EMAIL Sets the designer e-mail info displayed in drawings and some reports. ALL_Title_designer_logo.tpl
CU_Ontelolaatta_kuorilaatta_tarjousvaihe_20_2v.xls.rpt
CU_Palkki_tarjousvaihe_20_2v.xls.rpt
CU_Parvekelaatta_tarjousvaihe_20_2v.xls.rpt
CU_Pilari_tarjousvaihe_20_2v.xls.rpt
CU_SW-Elementti_tarjousvaihe_20_2v.xls.rpt
CU_TT-Laatta_tarjousvaihe_20_2v.xls.rpt
CU_Väliseinä_tarjousvaihe_20_2v.xls.rpt
C_Title_hollow_core_slab.tpl
Web-address
Web-osoite
P_DESIGNR_WWW Sets the designer web-address displayed in some reports. CU_Ontelolaatta_kuorilaatta_tarjousvaihe_20_2v.xls.rpt
CU_Palkki_tarjousvaihe_20_2v.xls.rpt
CU_Parvekelaatta_tarjousvaihe_20_2v.xls.rpt
CU_Pilari_tarjousvaihe_20_2v.xls.rpt
CU_SW-Elementti_tarjousvaihe_20_2v.xls.rpt
CU_TT-Laatta_tarjousvaihe_20_2v.xls.rpt
CU_Väliseinä_tarjousvaihe_20_2v.xls.rpt

FI-Model version / FI-Mallin tiedot

This user-defined attribute is used to set the publication date of the model version. This is currently not used in any templates, reports or custom properties.
 
Label UDA Description Affected templates, reports and custom properties
Publication date
Julkaisu pvm
MODEL_DATE Sets the model publication date. -

FI-Project / FI-Kohdetiedot

These user-defined attributes contain the project information used in drawings and reports. Here the affected drawing templates and the affected reports are listed separately.
 
Label UDA Description Affected drawing templates Affected reports
Project data / Kohdetiedot
  P_PROJ_INFO_1 Sets the project info on line 1 displayed in drawings and reports.  ALL_Frame_Outside.tpl
ALL_Title_customer.tpl
ALL_Title_designer.tpl
C_Title_hollow_core_slab.tpl
Frame_2xA3.tpl
Frame_3xA3.tpl
Frame_4xA3.tpl
Frame_5xA3.tpl
G_Detail_A4.tpl
Mid_Title_designer.tpl
A_Assembly_list.Excel.rpt
B_Fastener_list.Excel.rpt
CU_Ontelolaatta_kuorilaatta_tarjousvaihe_20_2v.xls.rpt
CU_Palkki_tarjousvaihe_20_2v.xls.rpt
CU_Parvekelaatta_tarjousvaihe_20_2v.xls.rpt
CU_Piirustusluettelo.xls.rpt
CU_Pilari_tarjousvaihe_20_2v.xls.rpt
CU_SW-Elementti_tarjousvaihe_20_2v.xls.rpt
CU_TT-Laatta_tarjousvaihe_20_2v.xls.rpt
CU_Väliseinä_tarjousvaihe_20_2v.xls.rpt
D_Drawing_list.Excel.rpt
P_Anchor_bolt_list.Excel.rpt
P_Beam_plate_list.Excel.rpt
P_Material_list_Concrete.Excel.rpt
P_Material_list_Steel.Excel.rpt
P_Part_list_Concrete.Excel.rpt
P_Part_list_Steel.Excel.rpt
P_Pile_list.Excel.rpt
R_Mesh_list.Excel.rpt
R_Reinforcing_bar_list.Excel.rpt
CU_Cast_unit_content.Excel.rpt
CU_Cast_unit_embeds.Excel.rpt
CU_Element_erection.Excel.rpt
CU_Element_list.Excel.rpt
CU_Element_reinforcing_bar_list.Excel.rpt
CU_Element_schedule.Excel.rpt
CU_Hollow-core_slab_list.Excel.rpt
  P_PROJ_INFO_2 Sets the project info on line 2 displayed in drawings and reports.  ALL_Title_customer.tpl
ALL_Title_designer.tpl
ALL_Frame_Outside.tpl
Frame_2xA3.tpl
Frame_3xA3.tpl
Frame_4xA3.tpl
Frame_5xA3.tpl
G_Detail_A4.tpl
Mid_Title_designer.tpl
  P_PROJ_INFO_3 Sets the project info on line 3 displayed in drawings and reports.  ALL_Title_customer.tpl
ALL_Title_designer.tpl
ALL_Frame_Outside.tpl
Frame_2xA3.tpl
Frame_3xA3.tpl
Frame_4xA3.tpl
Frame_5xA3.tpl
G_Detail_A4.tpl
Mid_Title_designer.tpl
  P_PROJ_INFO_4 Sets the project info on line 4 displayed in drawings and reports.  ALL_Title_customer.tpl
ALL_Title_designer.tpl
Project number / Työnumero
Customer
Asiakas
P_PROJ_NR_CUSTOMER Sets the project customer number displayed in drawings.  ALL_Title_customer.tpl  
Designer
Suunnittelija
P_PROJ_NR_DESIGNER Sets the project designer number displayed in drawings and reports.  ALL_Frame_Outside.tpl
ALL_Title_designer.tpl
C_Title_hollow_core_slab.tpl
Frame_2xA3.tpl
Frame_3xA3.tpl
Frame_4xA3.tpl
Frame_5xA3.tpl
G_Detail_A4.tpl
 
A_Assembly_list.Excel.rpt
A_MultiAssemblyList.rpt
B_Fastener_list.Excel.rpt
CU_Ontelolaatta_kuorilaatta_tarjousvaihe_20_2v.xls.rpt
CU_Palkki_tarjousvaihe_20_2v.xls.rpt
CU_Parvekelaatta_tarjousvaihe_20_2v.xls.rpt
CU_Piirustusluettelo.xls.rpt
CU_Pilari_tarjousvaihe_20_2v.xls.rpt
CU_SW-Elementti_tarjousvaihe_20_2v.xls.rpt
CU_TT-Laatta_tarjousvaihe_20_2v.xls.rpt
CU_Väliseinä_tarjousvaihe_20_2v.xls.rpt
D_Drawing_list.Excel.rpt
H_Hole_summary.rpt
Mid_Title_designer.tpl
P_Anchor_bolt_list.Excel.rpt
P_Beam_plate_list.Excel.rpt
P_Material_list_Concrete.Excel.rpt
P_Material_list_Steel.Excel.rpt
P_Part_list_Concrete.Excel.rpt
P_Part_list_Steel.Excel.rpt
P_Pile_list.Excel.rpt
R_Mesh_list.Excel.rpt
R_Reinforcing_bar_list.Excel.rpt
CU_Cast_unit_content.Excel.rpt
CU_Cast_unit_embeds.Excel.rpt
CU_Element_erection.Excel.rpt
CU_Element_list.Excel.rpt
CU_Element_reinforcing_bar_list.Excel.rpt
CU_Element_schedule.Excel.rpt
CU_Hollow-core_slab_list.Excel.rpt
CU_Valuyksikön_kokoonpanoluettelo.rpt
Responsible designer / Vastaava rakennesuunnittelija
  P_RESP_DESIGNER Sets the project responsible designer displayed in drawings. ALL_Title_responsible_designer.tpl  
Tags: 
UDA
user defined attributes
Finnish Environment
project
drawing template

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet