Sl.No | Custom Component | Desccription | Location/Role |
---|
1 | Canti_beam Rein
| - This component is used to create reinforcement for cantilever beams.
- It works for tapered beam with varying cross section.
| Rebar-Detailer, Precast Detailer |
---|
2 | Cast-In-Plate
| - This component is used to create different types of cast in plates as shown below.
- There are nine number of cast-in-plate types included in this component.
| Rebar-Detailer, Precast Detailer, Contractor |
---|
3 | CIP_Pile_2
| This component is used to place pile cap with 2 numbers of piles. The piles can be skewed rectangular or square. We can also adjust the offset for pile location and insertion value into pile cap.
| Tekla Warehouse |
---|
4 | CIP_Pile_3
| This component is used to place pile cap with 3 numbers of piles. The piles can be skewed rectangular or square. We can also adjust the offset for pile location and insertion value into pile cap.
| Tekla Warehouse |
---|
5 | CIP_Pile_5
| This component is used to place pile cap with 5 numbers of piles. The piles can be skewed rectangular or square. We can also adjust the offset for pile location and insertion value into pile cap.
| Tekla Warehouse |
---|
6 | CIP_Pile_6
| This component is used to place pile cap with 9 numbers of piles. The piles can be skewed rectangular or square. We can also adjust the offset for pile location and insertion value into pile cap.
| Tekla Warehouse |
---|
7 | CIP_Pile_9
| This component is used to place pile cap with 9 numbers of piles. The piles can be skewed rectangular or square. We can also adjust the offset for pile location and insertion value into pile cap.
| Tekla Warehouse |
---|
8 | Column_rein
| This component is used to create reinforcement for rectangular or square column. We can add different shapes of links as shown below. We can create crank lap with starter bar or with dowel bars as shown below. We can also provide three different spacing for the links.
| Rebar-Detailer, Precast Detailer |
---|
9 | Footing_iso
| - This tool creates an isolated footing with P.C.C, Footing, Pedestal, Grout and Shear key.
- It also has option to create construction joint (Yes/ No)
| Tekla Warehouse |
---|
10 | Iso Footing
| This component could be used to create top and bottom reinforcement of two layers. We also have option to create Lacer bar, can adjust three different spacing for top and bottom bars and can provide different cover for different sides for different layers.
| Tekla Warehouse |
---|
11 | Octagonal Foundation
| This tool is used to create octagonal footing with pedestal and also with reinforcement for both parts. | Tekla Warehouse |
---|
12 | Sleeper_TIN
| | Tekla Warehouse |
---|
13 | Step_Ftg_1
| - This component places single stepped footing with bottom reinforcements.
- You can adjust the width and other paramaeters in component properties, explode to adjust the heights.
| Tekla Warehouse |
---|
14 | Step_Ftg_2
| - This component places double stepped footing with bottom reinforcements.
- You can adjust the width and other paramaeters in component properties, explode to adjust the heights.
| Tekla Warehouse |
---|
15 | Stepped Isolated Footing
| - This component is used to create stepped footing.
- It includes Grout, Shear Key, Pedestal and Construction Joint options.
| Tekla Warehouse |
---|
16 | Tapered Footing
| - This component is used to create tapered footing.
- It includes pedestal and P.C.C
| Tekla Warehouse |
---|
17 | Turned Down Slab
| This component is used to create additional bottom portion for existing turned down slab | Tekla Warehouse |
---|
18 | Two-way slab
| - This component could be used to create a simple two way slab reinforcement in existing slab.
- You can adjust the slab end rebar extension, crank, development length, etc.
| Rebar-Detailer |
---|
19 | Wall_Nib
| This component creates cut to make wall nib portion for existing wall panel. It also adds reinforcement which can be adjusted and also be turned ON/OFF. | Precast Detailer, Contractor |
---|
20 | 3_Panel_Connection1
| - This component is used to create two wall to wall corner connections with brackets for 3 walls forming perpendicular connection.
- We have to select the main wall, then parallel wall and lastly the perpendicular wall.
- It applies different inserts like TPA3, CP1, CP5, etc. to form brackets. We can choose different insertes and use it in this component as required.
| Precast Detailer, Contractor |
---|
21 | 3_Panel_Corner_Con
| - This component is used to create one wall to wall corner connections with brackets for 3 walls forming perpendicular connection.
- We have to select the main wall and then parallel wall and lastly the perpendicular wall.
- It applies different inserts like TPA3, CP1, CP5, etc. to form brackets. We can choose different insertes and use it in this component as required.
| Precast Detailer, Contractor |
---|
22 | 5T_Lifter
| - This component is used to insert a single Lifter.
- We have to pick two points for insertion, first point at the top and second at the bottom.
- This component could be used inside other applications like Detailing manager, Double wall, etc.
| Precast Detailer, Contractor |
---|
23 | Beam Top Bar
| - This compoennt is used to insert Top rebar for Precast beam.
- We have options to define number of bars, rebar dimensions, cover thickness, etc.
| Precast Detailer |
---|
24 | Bottom Nib
| - This component is used to create reinforcement for wall bottom nib portion.
- It includes one horizontal bar and vertical bend bars.
| Precast Detailer |
---|
25 | COIL_INSERT
| - This component is used to model an insert for coil.
- This component could be used inside other applications as well.
| Precast Detailer, Contractor |
---|
26 | Column-Beam_HiddenCorbel
| - This component is used to create Column-Beam hidden corbel connection.
- It comprises of two inserts (EB_BESH200 & EB_CC200).
- We can also choose different insertes and use it inside this component as required.
| Precast Detailer, Contractor |
---|
27 | Column-Beam_HiddenCorbelTwin
| - This component is used to create Column-Beam two side hidden corbel connection.
- It comprises of two inserts (EB_BESH200 & EB_CC200).
- We can also choose different insertes and use it inside this component as required.
| Precast Detailer, Contractor |
---|
28 | Corner Panel Joint
| - This component is used to create corner cuts/ trims for walls joining perpendicularly.
- We can use Left side or right side cut or corner cut with quark distance.
| Precast Detailer, Contractor |
---|
29 | Corner_Connection
| - This component is used to create wall to wall corner connections with brackets.
- We have to select the parallel wall and then the perpendicular wall.
- It applies different inserts like TPA3, CP1, CP5, etc. to form the bracket. We can choose different insertes and use it in this component as required.
| Precast Detailer, Contractor |
---|
30 | Inserts & Embeds
| - There are several inserts and enbeds available in this version such as TPA3, CP1, CP5, etc.
- These component could be applied individually or could be used inside other applications.
| Precast Detailer, Contractor |
---|
31 | L_Beam_Col
| - This component is used to create sigle corbel at Column - beam junction.
- We have options to adjust corbel Width, Height and clearance.
| Precast Detailer, Contractor |
---|
32 | Lap_Joint
| - This component is used to create Lap joint between two walls.
- We have options to modify clearance, notches dimension, etc.
| Precast Detailer, Contractor |
---|
33 | Lap_joint_corner
| - This component is used to create Lap joint between two walls including options for corner joint.
- We also have options to modify clearance, notches dimension, etc.
| Precast Detailer, Contractor |
---|
34 | Lifter_Hook
| - This component is used to create lifter hook with rebar mesh for slabs and walls.
- We have options to control the dimensions of lifting hook and also rebar mesh properties.
| Precast Detailer, Contractor |
---|
35 | Lifters
| - This component is used to create lifter for wall panels.
- We have options to adjust the offset, position and notch dimensions.
- We can also use any required component inside this tool that will be used as lifter.
| Precast Detailer, Contractor |
---|
36 | Panel_Column
| - This component is used to craete loop connection between column and panel
- We can control/ modify notch dimensions and number of loops
| Precast Detailer, Contractor |
---|
37 | Panel_panel_loops
| - This component is used to craete loop connection between two continuous panels
- We can control/ modify notch dimensions and number of loops
| Precast Detailer, Contractor |
---|
38 | Panels_col
| - This component is used to craete connection for two beams conecting column in its face.
- We can modify the clearance and spacing for the coil/ sleeve in the connection.
| Precast Detailer, Contractor |
---|
39 | PC_CO_CO_GR_02
| - This component is used to create column shoe connection with pad footing.
- We can choose our own component for shoe type
- We can also adjust the Anchor bolt properties with separate compoennt and its attribute file.
| Precast Detailer, Contractor |
---|
40 | Sleeve type 1
| - This component is used to insert vertical sleeve with tube for wall grouting
- It inserts grouting tube and sleeve thrgouht the height of the wall panel
- We have option to turn ON/OFF the sleeve creation, shear key creation, adjust their profiles, etc.
| Precast Detailer, Contractor |
---|
41 | Sleeve type 2
| - This component is used to insert bend sleeve with tube for wall grouting
- It inserts grouting tube and sleeve as per given dimensions
- We have option to turn ON/OFF the sleeve creation, shear key creation, adjust their profiles, etc.
| Precast Detailer, Contractor |
---|
42 | SunshadeRein
| - This component is used to place sunshare with reinforcement on top portion of wall opening
- This will insert primary and secondary reinforcements
- We have options to control the concrete geometry and rebar properties
| Precast Detailer |
---|
43 | Top Nib Bars
| - This component is used to create reinforcement for wall top nib portion.
- It includes one horizontal bar and vertical bend bars.
| Precast Detailer |
---|
44 | Top_Lifters
| - This component is used to create lifter for wall panels.
- We have options to adjust the offset, position and notch dimensions.
- We can use either 5T or 10T lifter component inside this tool.
| Precast Detailer, Contractor |
---|