METL-CON Horizontal Cladding Support - Column (33) : Parameters Tab

Tekla Structures
Not version-specific
Tekla Structures
Environment
Not environment-specific

METL-CON Horizontal Cladding Support - Column (33) : Parameters Tab

Image
2015_09_08_10_45_222.png


OptionDescriptionDefault
Cladding TypeDefine the strut type to use between selected rails. Options are G140/150 or L145070Default strut type is the G140/150 section
GuageBoth G140/150 and L145070 have the option of 1.5mm or 2.0mm  thickness sections.1.5mm
Face Strut to the..Defines the direction to face the strut at column position when looking from the sheeting face towards the column. Options are Left or Right.Left
General Bolt GradeDefines Bolt grade to use for any bolts the macro creates. Generally bolts are not created by this macro as it needs to be connected to where an existing Horizontal Cladding sleeve connection (120) already exists. Changing this value will update any bolts used by the struts created by this macro.Existing bolt grade as applied by joint 120
ClassDefines the class for the objects created by the macro99

Was this helpful?