Rebar group dimension
Use for:
Marking and dimensioning (multiple) stirrup groups.
Examples:
Examples |
Image
|
Image
|
Image
|
Image
|
Tab | Description | See also |
Parameters | Define how stirrups must be indicated. You can also define the content of the mark for the stirrup dimensions. | |
Advanced settings | Define offsets, spaces and cc distances for the mark of the stirrup dimensions. | |
Rebar lines | Define the generation and the performance of the leader lines belonging to stirrup dimensions. |
Tab options
Option | Description | ||||||
Image
| Image
| Image
| Image
| ||||
Image
| Image
| Image
| |||||
Image
| Image
| Image
| |||||
Image
| Image
|
| |||||
Image
| Define the positioning of the text. The available options depend on the selected Annotation type at option Image
| ||||||
Image
| Image
| Image
| Image
| ||||
Image
| Image
| Image
| Image
| ||||
Image
| Image
| Image
| Image
| ||||
Image
| Image
| Image
| Image
| ||||
Some examples: | |||||||
Image
| Image
| ||||||
Image
| Image
| ||||||
Image
| Image
| ||||||
Image
| Image
|
| |||||
Image
| Image
| ||||||
Image
| This option is only available in case one of the following annotation types is used: Image
The options are: | ||||||
Image
| Image
| ||||||
Image
| Image
| ||||||
Image
| Image
| ||||||
Image
| Image
| ||||||
Image
Image
| Image
| ||||||
Image
Image
| Image
|
Option | Description | ||||
Consider irregular spaces as separate groups | Yes | Image
| |||
No | Image
| ||||
Dimension Each CC Distance | Yes | Image
| |||
No | Image
| ||||
Dimension prop distrline | Select the desired dimension properties for the displayed dimension line. The available options depend on the settings which can be defined for Dimension Properties, for example:
Image
| ||||
Available elements | Image
| ||||
Elements in mark | Select the elements you want to include and show in the mark. | ||||
Text properties | Select the text properties in which the mark must be displayed. The available options are the settings which can be defined in Text properties: Image
| ||||
Units
Option is available for the following mark content: - Length - cc - cc min - cc max - cc exact - cc target - (Length itemized) - Length itemized) | Define the units. The options are: | ||||
Automatic |
| ||||
mm | |||||
cm | |||||
m | |||||
Foot inch | |||||
Inch | |||||
Format
Option is available for the following mark content: - Length - cc - cc min - cc max - cc exact - cc target - (Length itemized) - Length itemized) | Define the format. The options are: | ||||
### |
| ||||
###[.#] | |||||
###[.##] | |||||
###[.###] | |||||
###.# | |||||
### #/# | |||||
###.## | |||||
###.### | |||||
Precision | 0.00 | For precision 0.33 for example, the actual value 50.40 is displayed as 50.33. | |||
0.50 | |||||
0.33 | |||||
0.25 | |||||
1/8 | For imperial units. | ||||
1/16 | |||||
1/32 | |||||
1/10 | For defining precisions without rounding. | ||||
1/100 | |||||
1/1000 | |||||
Image
Option is available for the following mark content: - cc - (Length itemized) - Length itemized
| Values A, B, C, .. | Image
| |||
Lengths along rebar axis | Length is calculated along the center line of the rebar: Image
| ||||
Rebar pos | Define whether the position number of the rebar must be shown or not, and on which position. The options are: | ||||
Not | Image
| ||||
Before main mark | Image
| ||||
Behind main mark | Image
| ||||
Below main mark | Image
| ||||
Position frame | This option is only available in case one of the following annotation types is used: Image
The options are: | ||||
Image
| Image
| ||||
Image
| Image
| ||||
Image
| Image
| ||||
Advanced settings tab
Options | Description | ||||
First line spacing | Image
| ||||
Next line spacing | Image
| ||||
Free space below text/ Dimension line spacing | This option defines the distance between the generated dimension lines.
This option is relevant in case two (or more) dimension lines are generated by the tool. For this, also see option Rebar group tolerance. | ||||
Dimension line spacing |
| ||||
Image
| |||||
Free space below text |
| ||||
Image
| |||||
Text offset dimline | Image
| ||||
Rebar group tolerance | Define whether double stirrup groups are combined into one dimension line. | ||||
Image
|
| ||||
If the distance between the stirrups (in the image below 12 mm) is greater than the entered value (=10 mm), two dimension lines are created: Image
| |||||
Image
|
| ||||
If the distance between the stirrups (in the image below 12 mm) is smaller than the entered value (=20 mm), two stirrup groups are combined into one dimension line: Image
If the shape of the stirrups is the same, the marks are also combined. In the image below as “2x 6 Ø 8”. Image
| |||||
Part extrema | Define how to close dimension lines on the contour of the concrete part. The options are: | ||||
Image
| Image
| Image
|
Examples | |
Image
| The dimension line is always positioned on the outermost lines of the concrete part: Image
|
Image
| The dimension line is positioned to the nearest side/geometry point of the concrete part relative to the picked insertion point of the dimension line (plugin). See the examples below. Image
Image
Image
|
Rebar lines tab
On this tab, you can define the generation and the appearance of the leader lines and symbols for the dimension line. You can apply this for Not visualized rebars, Visualized rebars, Group end rebars and Part edges:
Option | Example |
Not visualized rebars | Image
|
Visualized rebars | Image
Image
|
Group end rebars
(First and last bar) | Image
Image
|
Part edges | Image
|
Option | Description | |||||||||
Image
| Define the generation of the leader lines and symbols for the Not visualized rebars. The options are: | |||||||||
Image
| No leader lines and symbols. | Image
| ||||||||
Image
| Leader lines. Define the length of the leader lines relative to the dimension line. | Image
| ||||||||
Image
| Leader lines and symbols. Define the length of the leader lines relative to the dimension line. | Image
| ||||||||
Image
| Leader lines. Define the length of the leader lines relative to the contour of the concrete part. | Image
| ||||||||
Image
| Leader lines and symbols. Define the length of the leader lines relative to the contour of the concrete part. | Image
| ||||||||
Image
| Leader lines. Define the length of the leader lines relative to the rebar. | Image
| ||||||||
Image
| Leader lines and symbols. Define the length of the leader lines relative to the rebar. | Image
| ||||||||
Image
| Only symbols. | Image
| ||||||||
Image
| Define the generation of the leader lines and symbols for the Visualized rebars. See the examples in the option Not visualized rebars. The options are: | |||||||||
Image
| Image
| Image
| Image
| |||||||
Image
| Image
| Image
| Image
| |||||||
Image
| Define the generation of the leader lines and symbols for the Part edges. See the examples in the option Not visualized rebars. The options are: | |||||||||
Image
| Image
| Image
| Image
| |||||||
Image
| Image
| Image
| Image
| |||||||
Image
| Define the generation of the leader lines and symbols for the contour of the concrete part. See the examples in the option Not visualized rebars. The options are: | |||||||||
Image
| Image
| Image
| ||||||||
Image
| Image
| Image
| ||||||||
Image
| Define the color and the line type for the various leader line types. The options are: Image
| |||||||||
Image
| Define whether all leader lines /symbols are shown in Visualized rebars or not, or if this should be done only at one single rebar. The options are: | |||||||||
Image
Image
| Image
| |||||||||
Image
| Image
| |||||||||
Image
| Image
| |||||||||
Image
| Define the size and the color of the applied symbols. Also define the shape of the symbol. Use the available symbols in Tekla Structures by selecting a symbol file and a symbol number: Image
Image
Examples: | |||||||||
Image
| Image
| |||||||||
Image
| Image
| |||||||||
All rights reserved. No conclusions can be associated to the representation of the pictures in relation to the operating systems under which Tekla Structures runs.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-nd/4.0/ or send a letter to Creative Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.