Hello!

Did you know that logged in users can see a lot more content?

PEB Frames

Last updated September 4, 2018 by Developer TIN Structures.developer.in@trimble.com

Software version: 
Not version-specific
Environment: 
Default
India
Not environment-specific
United States (Imperial)
United States (Metric)

PEB Frames

The PEB Frames application allows you to create PEB frames with a set of pre-set values.

How to locate

Installers are available at Pre-Engineered Building Tools for Tekla Structures version 21.0 and above.
For older versions, download at Pre-Engineered Building Tools old installers

After installation, the PEB Frames application will be available in the Applications & Components.
 

Usage

Click the PEB Frames icon in the Applications & Components. Then click Pick in the PEB Frames dialog box shown below. Then next pick the direction of the frame. After this, select draw in the dialog box to draw the frame with the loaded settings.

PEB Frames dialog box

The dialog box has the  following tabs:
• Frame
• Frame parameters
• Interior column parameters

Frame

 

Frame types:

  Clear span frame with ridge splice
Single slope frame
'Lean To' frame which connects to existing column
Clear span frame with ridge rafter

Interior column numbers - Either 'none' or between 1 to 6.
Interior column spacing - Distance list from the left side column.
Roof slope - Slope in degrees.
Copies - Distance list to create frames at a specified location. The first entry should be 0.0 so that the first frame is created at selected points.

Frame parameters

  

Number of splices - The options are none, 1, 2 and 3. The splice lengths are shown in the boxes.
The column/rafter uses the splice, base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

and knee connection macros.
The attributes of the saved macros can be selected here.
Ridge Rafter option in this tab will be available only when the clear span with ridge rafter option is selected in the first tab.

Interior column parameters

 

Number of splices -The options are none, 1, 2 and 3. The splice lengths are shown in the boxes.
The interior column uses the splice, base plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

and interior column connection macros.
The attributes of the saved macros can be selected here.

Additional information

Note: This PEB Frame is an application. The values that are given as input cannot be modified later once the application is applied and the frames are created in the model. However, the members created by PEB frames are PEB components, and you can access and modify the required values.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our documentation.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet