Duggans Standard Anti-Sag Bay - Bolts tab
Not version-specific
Tekla Structures
Environment
Not environment-specific
Use the Bolts tab in the Duggan Steel Standard Anti-Sag Bay Properties panel to override the default bolt data.
Image
Option | Description | Default | Other |
---|---|---|---|
Primary bolts | These properties specify the bolts connecting the purlin to the tiled roof strut cleat on the top most purlin on the roof slope. | ||
Bolt size (Dependant on Bolt standard selected) | This specifies the diameter in mm to be used for the bolts where the standard manufacturer's size is not to be used. If you choose the Default setting the bolt size will be 12mm. | The default is set to Default. | |
Bolt standard (Multiple choices) | This sets the bolt standard of bolts to the primary member in the joint. The Default setting is 4.6XOX. | The default is set to Default. | |
Tolerance | This is the difference between the hole diameter and the bolt diameter in mm. | The default setting is 2mm. | |
Thread in mat (Default, Yes, No) | This defines whether the thread may pass into the bolted parts or not when using bolts with a standard thread length. With full-threaded bolts this button has no meaning. If set to Default the setting is Yes. | The default is set to Default. | |
Secondary bolts | These properties specify the bolts connecting the purlin to the tiled roof strut cleat at intermediate positions on the roof slope. Details as above. | The default bolt standard is 4.6XOX. The default bolt diameter is 12mm. | |
Tertiary Bolts | These properties specify the bolts connecting the purlin to the tiled roof strut cleat on the lowest purlin on the roof slope. Details as above. | The default bolt standard is 4.6XOX. The default bolt diameter is 12mm. |
See also
Duggans cold rolled - Important informationDuggans Standard Anti-Sag Bay
Duggans Standard Anti-Sag Bay - Parameters tab