Duggans Eaves Beam to Stanchion - Plate Dimensions tab

Tekla Structures
Not version-specific
Tekla Structures
Cold Rolled
Duggan Steel
duggans
eaves beam to stanchion
plate dimensions tab
Environment
Not environment-specific

Use the Plate Dimensions tab in the Duggan Steel Eaves Beam to Stanchion Properties panel to control the size of the plate attached to the column when using the bolted option.

Image
tekla-structures-duggans-eaves-to-stanchion-plate-dimensions-tab.png


OptionDescriptionDefaultOther
Plate to Column WidthThis sets the width of the plate which is connected to the stanchion in the joint if the fixing bracket is bolted.The default width will be determined appropriately from the bolt data.
Image
tekla-structures-parts-tab-stanchion-plate-b.png
Plate to Column HeightThis sets the height of the plate which is connected to the stanchion in the joint if the fixing bracket is bolted.The default height will be determined appropriately from the bolt data.
Image
tekla-structures-parts-tab-stanchion-plate-h.png
Plate to Column ThicknessThis sets the thickness of the plate which is connected to the stanchion in the joint if the fixing bracket is bolted.The default setting is 5mm.
Image
tekla-structures-parts-tab-stanchion-plate-t.png

See also

Duggans cold rolled - Important information
Duggans Eaves Beam to Stanchion
Duggans Eaves Beam to Stanchion - Parts tab
Duggans Eaves Beam to Stanchion - Parameters tab
Duggans Eaves Beam to Stanchion - Bolts tab
Was this helpful?