Built-up Box Beam (Custom Part)
The 'Built-up Box Beam' custom part allows user to create the built up box beam from plate / sections.
How to Locate
Installers are available at Built-up Custom Parts
After installation, the ‘Built-up Box Beam’ custom part is available in the component catalog group 'Builtup Custom Parts'.
Usage
Click the highlighted icon from 'Application & components' catalog. The user has to pick the start point and end point and the built up box beam will be created.
Custom Part Dialog box
This plug-in dialog box contains following tabs.
• Parameters
• Additional Cover
• Web Plates
• Parts
• Weld
• Position
Available Section Types
Cross-Section Types | Description |
---|---|
Image
|
Boxed Section from plates |
Image
|
Boxed C Section with top and bottom plates |
Image
|
Back to Back C Sections with top and bottom plates |
Image
|
H Section from plates |
Image
|
Double I Section with top and bottom plates |
Image
|
Box angles with covers |
Image
|
Double channel box with covers |
Parameters - Plate Prefix
All available plate profile prefixes is displayed to opt. If default option is opted then prefix is read from Menu > Settings > Options > Components > Profile Names > Plate.
Boxed Section from plates
Parameters
Vertical Symmetrical
Available Options | Description |
---|---|
Image
|
Different thickness for top and bottom plates |
Image
|
Same thickness for top and bottom plates |
Horizontal Symmetrical
Available Options | Description |
---|---|
Image
|
Horizontally non-symmetrical |
Image
|
Horizontally symmetrical |
Parts - Boxed Section from plates
There is a provision to update assembly user defined attributes (UDA) and it can be used for variour purposes such as filter, report, etc.
Weld - Boxed Section from plates
Boxed C Section with top and bottom plates
Parameters
Vertical Symmetrical
Available Options | Description |
---|---|
Image
|
Different thickness for top and bottom plates |
Image
|
Same thickness for top and bottom plates |
Horizontal Symmetrical
Available Options | Description |
Image
|
Horizontally non-symmetrical |
Image
|
Horizontally symmetrical |
Cover Options
Available options | Description |
---|---|
Image
|
Top and bottom cover plates |
Image
|
Only top cover plate |
Image
|
Ony bottom cover plate |
Image
|
No cover plates |
Parts - Boxed C Section with top and bottom plates
There is a provision to update assembly user defined attributes (UDA) and it can be used for variour purposes such as filter, report, etc.
Weld - Boxed C Section with top and bottom plates
Back to Back C Sections with top and bottom plates
Parameters
Vertical Symmetrical
Available Options | Description |
---|---|
Image
|
Different thickness for top and bottom plates |
Image
|
Same thickness for top and bottom plates |
Horizontal Symmetrical
Available options | Description |
---|---|
Image
|
Different thickness for left and right side plates |
Image
|
Same thickness for left and right side plates |
Cover Options
Available options | Description |
---|---|
Image
|
Top and bottom cover plates |
Image
|
Only top cover plate |
Image
|
Ony bottom cover plate |
Image
|
No cover plates |
Parts - Back to Back C Sections with top and bottom plates
Weld - Back to Back C Sections with top and bottom plates
H Section from plates
Parameters
Vertical Symmetrical
Available Options | Description |
---|---|
Image
|
Different thickness for top and bottom plates |
Image
|
Same thickness for top and bottom plates |
Horizontal Symmetrical
Available Options | Description |
---|---|
Image
|
Different thickness for left and right side plates |
Image
|
Same thickness for left and right side plates |
Additional Cover - H Section from plates
Parts - H Section from plates
Weld - H Section from plates
Double I Section with top and bottom plates
Parameters
Vertical Symmetrical
Available Options | Description |
---|---|
Image
|
Different thickness for top and bottom plates |
Image
|
Same thickness for top and bottom plates |
Horizontal Symmetrical
Available Options | Description |
---|---|
Image
|
Different thickness for left and right side plates |
Image
|
Same thickness for left and right side plates |
Cover Options
Available options | Description |
---|---|
Image
|
Top and bottom cover plates |
Image
|
Only top cover plate |
Image
|
Ony bottom cover plate |
Image
|
No cover plates |
Parts - Double I Section with top and bottom plates
Weld - Double I Section with top and bottom plates
Box Angles with cover plates
Parameters
Parts - Box Angles with cover plates
Weld - Box Angles with cover plates
Double C Box section
Parameters
Vertical Symmetrical
Available Options | Description |
---|---|
Image
|
Different thickness for top and bottom plates |
Image
|
Same thickness for top and bottom plates |
Horizontal Symmetrical
Available Options | Description |
---|---|
Image
|
Different thickness for left and right side plates |
Image
|
Same thickness for left and right side plates |
Cover Options
Available options | Description |
---|---|
Image
|
Top and bottom cover plates |
Image
|
Only top cover plate |
Image
|
Ony bottom cover plate |
Image
|
No cover plates |
Parts - Double C Box section
Weld - Double C Box section
Web Plates
This web plates options are available for the main web section as 'C' or 'I' sections.
Position
Adjust to boundary center
This combo is used to adjust the overall solid center to the picked point or not. Ex: used from star profile for understanding purpose.
Option | Output |
Adjust Solid : No Plane: Middle Depth: Middle |
Image
|
Adjust Solid : Yes Plane: Middle Depth: Middle |
Image
|
Adjust Solid : No Plane: Middle Depth: Behind |
Image
|
Adjust Solid : Yes Plane: Middle Depth: Behind |
Image
|