Brace Setout
Not version-specific
Tekla Structures
Environment
Not environment-specific
This tool helps to adjust work line based on predefined parameters for vertical as well as horizontal brace.
How to locate
Installers are available at Brace Setout.After installation, the 'Brace Set-out' is available in the component catalog.
Image
Usage
Select the braces which requires adjustment and reference member is required for horizontal braces adjustment.
Image
Image
Application Dialog
Image
Brace Shape
Type | |
L | Angle profiles |
T | T profiles |
TwinAngles | 'TwinAngles' plugin which is available in Built-up Members |
Brace Type
Option | |
Vertical | Adjust work line for vertical braces |
Reference plane | To adjust horizontal braces against reference member position |
Vertical Braces
Option | |
Work Line | Adjust the brace vertical flange based on weld / bolt line. |
Gusset | Adjust the brace position to accommodate gusset plate |
Both | Above both options are considered |
Reference Plane
Option | |
Work Line | Adjust the brace horizontal flange based on weld / bolt line. |
Reference | Move the brace with reference to reference member |
Both | Above both options are considered |
Gusset Thk Type
Option | |
Standard | The gusset thickness is based on brace thickness and the mapping is available in file "Gusset thickness.txt" which is available in system folder. (Ex. common\system) |
User | User can provide non-standard thickness |
Work-Line Type
Option | |
Single gauge | Brace is adjusted based on single guage line against flange width and the mapping is available in file "L Profile Gaugelines.txt" which is available in system folder (Ex. common\system). |
Double gauge | Brace is adjusted based on middle of double guage lines against flange width. The mapping is available in "L Profile Gaugelines.txt" file |
COG / Weld Line | Brace is adjusted based on COG line and this value is based profile information and for parametric profiles the mapping information is available in file "Brace CG.txt" which is available in system folder (Ex. common\system). |
Centre | Brace is adjusted to middle of flange |
User gauge | User value is used to adjust brace |
Image
Image
Image
Reference Type
Once you selected the reference member then braces have to selected and only braces between top flange and bottom flange plane of reference member are filtered for further process.Option | |
Top | Move the brace to the top of reference member |
Middle | Move the brace to the middle of reference member |
Bottom | Move the brace to the bottom of reference member |
Select:
User can select the required brace sand it displays the filtered quantity based profile type and also boundary plane of reference member.
Adjust:
To perform the brace set-out adjustments, press the 'Adjust' button and the result is displayed as report.
Additional Points
For Brace shape TwinAngles below highlighted options are available.
Note: Brace set out For Twin Angle will only work for Twin angles created with Builtup Angle Macro.
Image
Image