Hello!

Did you know that logged in users can see a lot more content?

Auto Component Fittings

Last updated July 10, 2018 by Developer TIN Structures.developer.in@trimble.com

Software version: 
Not version-specific
Environment: 
Not environment-specific

Auto Component Fittings

Creating fittingadjustment of a part end

connection between Built-up members (Beam to Column or Beam to Beam)

How to Locate

Installers are available at Component Fittings
After installation, 'Auto Component Fittings' extension is available in the component catalogcatalog that contains all system components and custom components, and the macros and applications

The term component catalog is used in Tekla Structures until version 21.1.

group 'Component Fittings'.

 

Using ‘Auto Component Fittings’

Click the above tool icon and the tool window opens as below.

 

1. To apply the fitting connection between built up members, select the members using ‘Select’ tab, and ‘Apply’.

 

 

2. Option is available if you need to exclude any of the members from a selection. Once you exclude any member, please press the Filter for confirmation.

3. Under ‘Attributes’ tab, you can control the clearanceset distance between objects

In bolted connections, clearance is required for entering and tightening the bolts with an impact wrench. In addition to this, there may be a clearance for a fillet.

In welded connections, clearances are required in order to allow a welder to lay a correct weld.

Reinforcing bar clearance defines the minimum clearance or the allowed overlap for reinforcing bars when they are checked against other objects.

required while fitting the built up members & Square to main or secondary member (see below)

    

  

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our documentation.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet