System component Wooden roof (63) includes several improvements.
You can now define a wall plate and a counter profile on the tab Detail bottom side. Optional you can create drilled holes in the rafters (negative volume):
On this tab you can also create a (grey) profile for the gutter connection:
You can now define the position of the knee brackets on the tab Knee bracket.
You can define the type of knee bracket in the list boxes Knee bracket 1 and Knee bracket 2.
In the two list boxes at the botom of tab Knee bracket you can define the position and the offset.
On the tab Panel horizontal you can define the overlap of the tile battens and use several options to bevel tile battens.
Tab Detail top side now includes several now options in the list boxes for detailing the top side.
For more detailed information about the usage and the options of component Wooden roof (63), see the accompanying Help.