Hello!

Did you know that logged in users can see a lot more content?

Fixes in Tekla Structures 2017

This page allows you to see the cumulative fixes up to the latest service pack. See the main release notes for Tekla Structures 2017 for information on new features and other major improvements.

Click the issue numbers to check which release(s) include the fix. You can also refer to the individual release notes for each release to check the included content.

Filters
Defect number Development areasort descending Description
123424 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1042)
, you can now use custom componentcomponent that the user creates and uses for creating model objects whose composition the user can modify as a group

parts for anchor rods.

116146 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1004)
, you can now use custom components for anchor rods.

124622 Steel components

In Circular base plates (1052), you can now use custom componentcomponent that the user creates and uses for creating model objects whose composition the user can modify as a group

parts as anchor rods.

125685 Steel components

In Box column base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1066)
, you can now use custom componentcomponent that the user creates and uses for creating model objects whose composition the user can modify as a group

parts.

125684 Steel components

In Safety rope hooks (1062), you can now use custom componentcomponent that the user creates and uses for creating model objects whose composition the user can modify as a group

parts.

125645 Steel components

In Net hooks (1061), you can now use custom componentcomponent that the user creates and uses for creating model objects whose composition the user can modify as a group

parts.

125640 Steel components

In Lifting alignment pieces (1031), you can now use custom componentcomponent that the user creates and uses for creating model objects whose composition the user can modify as a group

parts.

125302 Steel components

Stairs (S71), Wooden steps pan (S72), Polybeampart of a certain shape that is created as a continuous chain of beams passing through points that the user picks

The segments of the polybeam are straight, but segment intersections can be curved. For example, a beam that follows a zigzag line is a polybeam.

pan (S73)
and Z pan (S74) now create stairs correctly when the work planeplane that the user has chosen in a model and that is currently active for working on in a model view

Newly created, copied, or moved model objects comply with the work plane. For example, shifting the work plane to follow a sloped plane makes it easier to model sloped structures.

is changed.

117890 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1053)
, you can now set the part name of the plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

in the Name box on the Parts tab.

126565 Steel components

In Bent shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(48)
, you can now set the bolt standard for secondary bolts on the Bolts tab.

85710 Steel components

In Full depth S (185), some cuts were previously not created correctly. This has now been fixed.

115542 Steel components

In New notchcut in one component object or input part for receiving another component object or input part

(49)
, the positions and sizes of the web and flange chamfers are now correct.

116356 Steel components

In Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
, it is now possible to create a chamfer on a gusset when using twin profiles.

118049 Steel components

In Full depth S (185), the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

is now cut parallel to the main beam web as set in the beam web cut option.

119535 Steel components

In Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
, it is now possible to define the finish property for a rectangular plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

.

126105 Steel components

Stub (133) now works when the height of the secondary beam is greater than 1500 mm.

99097 Steel components

In Full depth S (185), the cuts are now created correctly.

111364 Steel components

In Spiral stair (S68), the highest step is now in the correct position, and the step outer radius is used in all cases.

113536 Steel components

In Tower member macrosaved series of actions that includes instructions for a program

Macros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.

Macros can, for example, be used for creating drawings or reports.

Macros are sometimes used to run an application.

(S63)
, imperial units are now shown correctly in the component properties dialog box.

115761 Steel components

In Column with shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(131)
, the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

is now parallel to the beam web, and there is no gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

between the stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

and the column web.

119357 Steel components

Previously, when you defined stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

positions on the Stiffeners tab in U.S. Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

connection (71)
, and entered a space after a position, Tekla Structures stopped working. This does not happen anymore.

114591 Steel components

In Column with stiffeners W (182), you can now define the gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

between the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

web and the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

on the Plates tab.

122435 Steel components

In Web stiffened base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1016)
, setting the shear keycomponent object that represents a short steel part welded to the bottom of a base plate

offset no longer affects the position of horizontal stiffeners.

126018 Steel components

In Std bracing connection (67), creating a default plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

for one or two secondary beams now works better than before. When using one secondary beam, Tekla Structures no longer crashes.

79748 Steel components

In Welded gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(10)
, stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

height now works correctly as defined in the connection properties.

79750 Steel components

In Welded gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(10)
, Bolted gusset (11) and Tube gusset (20), stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

prefixes and materials now work correctly as defined in the connection properties.

103741 Steel components

In Welded to top flange (147), the finish property of the opposite we stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

is now used correctly.

104719 Steel components

In Splice connection (77), it is now possible to create external flange spacer plates when the rotation of beams is set to Top or Below in beam properties.

110297 Steel components

In End platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(144)
, holes are now created correctly with thick shimcomponent object that represents a plate that is used for filling clearances and gaps on the construction site

plates. Previously, if the thickness of the shim platecomponent object that represents a plate that is used for filling clearances and gaps on the construction site

was 40 or over, the holes were not created correctly.

115062 Steel components

In Shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

simple (146)
, the angle box profile is now created using the material defined on the Angle box tab.

116009 Steel components

In Stiffened base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1014)
, weld number 4 is now created in the correct position.

117564 Steel components

In Joist to column, type 1 (161), the stabilizer bolts now go through the column flange and beam bottom flange when the offsets are defined.

119336 Steel components

In Splice connection (77), the top external flange platecomponent object that represents a plate that connects the flanges of a beam to a column

Flange plates are used in moment connections, for example.

is now created in the correct position when the main beam is made of plates.

119951 Steel components

In Shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

simple (146)
, the plate washer width and top flange cutback are now applied correctly as defined in the component properties.

123195 Steel components

In Standard gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(1065)
, you can now enter multiple values for bolt spacing, and define the top and bottom edge distance for bolts. 

126199 Steel components

In Shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

simple (146)
, the correct number of bolts is now created when using plate washers.

127120 Steel components

In Full depth (184) and Full depth S (185), some cuts were previously not created correctly. This has now been fixed.

111167 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, the Same bolt length for all option now works correctly. In Clip angle (141) and Two sided clip angle (143), the default attachment type option on the Bolts tab now matches the result in the model.

122802 Steel components

In Spiral stair (S68), the number of turns is now correct with both the clockwise and counter clockwise setting. The positions of inner toe profiles are now also correct with the clockwise setting.

102321 Steel components

In Seating (39), the welds are now in the correct positions when column and beam webs are perpendicular to each other.

114385 Steel components

In Hollow brace wraparound gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(59)
, the brace connection plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

is now positioned correctly when using a chamfered brace connection plate. The chamfers are now created correctly in the brace connection plate. The boxes for chamfer values are now unavailable when chamfers cannot be created in the brace connection plate.

114538 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, the bolts are now correctly rotated on the angle box.

114631 Steel components

In Cast-in plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1069)
, the bolts now work correctly with plate washers. Also, it is now possible to set slotted holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

options when using plate washers.

116561 Steel components

In Column with stiffeners W (182), weld number 7 is now positioned correctly for the bottom NS stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

.

117347 Steel components

In Stiffened shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(17)
, the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

is now created correctly, and the shim platecomponent object that represents a plate that is used for filling clearances and gaps on the construction site

is created when defined. The bolt spacing for the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

now also works correctly.

120667 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, the bolts on the clip angles are no longer missing.

125517 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1004)
, the plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

, leveling plate and shimcomponent object that represents a plate that is used for filling clearances and gaps on the construction site

plates are now positioned correctly as defined. Also, bolts, anchor rods and custom components are now positioned correctly.

82730 Steel components

In Haunchcomponent object that represents a wedge-like structure that strengthens a beam at its end

(40)
, weld number 6 is now in the correct position when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is skewed, and the haunch is made from a profile.

127531 Steel components

In Create holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

around part (92)
, it is now possible to create exact holes around circular sections.

79882 Steel components

In Welded to top flange (147), the positions of the top and the bottom weld backing bars are now correct.

115103 Steel components

In Gusseted cross (62), it is now possible to define slotted holes for the gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

bolt connection and for bracing connections. For bracing connections, it is possible to define slotted holes separately for the connection plates and L profiles.

116847 Steel components

In Two sided end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(142)
, the safety connections now work correctly when end plates are extended above or below the secondary parts flanges.

117705 Steel components

In Two sided end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(142)
, the bolt vertical edge distances now work correctly when using safety connections.

120664 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(117)
, the correct number of bolts is now created.

124094 Steel components

In Z pan (S74), a correct number of nose plates is now created in the correct position. The welding on the steps is now also correctly created.

125070 Steel components

In Column splice (132), the web and flange bolts are now created with the bolt standard set in the component properties dialog box.

127901 Steel components

In Splice type 1 (56), the bolts now have a default tolerance of 2.0 mm in the UK environment.

126038 Steel components

In Eaves haunchcomponent object that represents a wedge-like structure that strengthens a beam at its end

(102)
, weld number 6 is now positioned correctly.

124170 Steel components

In Seating cap (37), it is now possible to define the material and name for Prim end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

and Washer plates on the Parts tab.

86414 Steel components

In 2L splice (152), the slotted holes for the secondary bolts are now positioned correctly.

87896 Steel components

In Two sided end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

- Cfl (112)
, it is now possible to define the material and the name separately for the end plates and the compensating plates.

88049 Steel components

In Box column base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1066)
, the bolt edge distance now works correctly.

94922 Steel components

In Stringer to channel (127), the option to set the angle position on the Parameters tab now works correctly.

123346 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1004)
, you can now set the classpart property that groups parts according to identifiers given by the user

The identifiers of classes are usually numbers. Classes can be used for defining the color of parts in the model, for example. Class does not influence the numbering of model objects.

information for each plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

on the Parts tab.

123193 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
, the middle end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

is now positioned correctly with the correct thickness defined in the component dialog box. Welds are now also created correctly for the middle end plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

.

89988 Steel components

Stanchion double plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(87)
now works reliably with an L profile as the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

.

92638 Steel components

In Stiffened base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1014)
, the stiffeners are now created with the correct chamfer dimensions.

108594 Steel components

In Cast-in plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1069)
, deleting of bolts now works in all situations.

109762 Steel components

In Joining plates (14), Cranked beam (41), U.S. Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

connection (71)
, Column with shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(131)
, End platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(144)
, Shear plate simple (146), Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(196)
, Base plate (1042) and U.S. Base plate (1047), staggered bolt types are no longer mixed.

125514 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1042)
, weld number 2 is now created correctly in all situations.

128659 Steel components

In Tube crossing (22), chamfered connection plates are now correctly positioned in all situations.

128846 Steel components

Rail connection (70) now works correctly after using the Copy special - Rotate and Copy special - Mirror commands.

128943 Steel components

In U.S. Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1047)
, the vertical offset for bolts now works correctly.

129024 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1004)
, the leveling plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

diameter no longer affects the position of cast plates.

129026 Steel components

Battering connection (13) now works reliably with L profiles.

106280 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, it is now possible to define if the plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

washers are placed symmetrically or asymmetrically.

94158 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, the vertical offset to the first bolt is now correctly calculated when the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

is sloped.

123272 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, the assembly of the bolted parts is now in the correct order.

128780 Steel components

In Hss Brace special (66), the gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

is now correctly created in all situations.

54977 Steel components

In Tube seatcomponent object that represents a structure upon which a component secondary part rests

(104)
, the bolted angle is now correctly positioned in all situations.

66113 Steel components

In Pipe column and beam panel zone (21), there is now a center holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

option for the top penetrating diaphragm on the Fabrication dimensions tab. The option works when there is no upper column. If the value is > 0, the hole is created. If the value is 0, the hole is not created. If you do not enter any value, the hole is created as before.

110636 Steel components

In Bent plate(1) part that is created from contour plates, or beams whose profile is a plate

(1) Bent plates can be conical or cylindrical.

Curved beams, spiral beams, or deformed parts cannot be used for creating a bent plate.

(2) component object that represents an angle that is bent from a plate and that connects parts

(190)
, some cuts were previously not created correctly. This has now been fixed.

128293 Steel components

In Pipe column and beam panel zone (21), the initial value of the penetrating diaphragm plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

thickness is now improved so that it also takes the upper column thickness into account. Previously, only the lower column thickness was taken into account.

48331 Steel components

In U.S. Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

connection (71)
, Base plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1004)
, U.S. Base plate (1047) and Circular base plates (1052), the delete option for bolts and anchor rods now works correctly.

129776 Steel components

In Splice connection (77), web bolts are now correctly positioned when using staggered bolts.

91907 Steel components

Turnbuckle connection (126) now works correctly for parts with a small length.
In Turnbuckle bracing (S3), the bar length is now correct when using a tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

as the connection type.

129771 Steel components

Tensioner brace and compression bar (13) has new options:

  • You can now set the origin position for calculating the brace offset.
  • On the Compression bar tab, you can now set that the offset global x is always in use.
127486 Steel components

In Stiffened end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(27)
and Partial stiff end plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(65
), it is now possible to set the far side stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

as full depth.

127485 Steel components

In Stiffened end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(27)
and Partial stiff end plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(65)
, it is now possible to create the bottom stiffeners as one plate.

66135 Steel components

In Splice connection (77), it is now possible to control the slotted holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

options separately for main and secondary web bolts, and also main and secondary flange bolts.

89811 Steel components

In Splice plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

2 (62)
, it is now possible to control the main web bolts on the Primary web bolts tab and the secondary web bolts on the Secondary web bolts tab. Flange bolts can be controlled on the Primary flange bolts tab and on the Secondary flange bolts tab. You can separately define the settings for the bolt structure, slotted holes and extra length.

111871 Steel components

In Joist to beam, type 1 (160), it is now possible to create a bearing plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

.

111879 Steel components

In Joist to beam, type 1 (160), the clearanceset space between objects

In bolted connections, clearance is required for entering and tightening the bolts with an impact wrench. In addition to this, there may be a clearance for a fillet.

In welded connections, clearances are required in order to allow a welder to lay a correct weld.

Reinforcing bar clearance defines the minimum clearance or the allowed overlap for reinforcing bars when they are checked against other objects.

between the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

and secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

's bottom chord now works correctly when the secondary part is sloped or skewed.

120542 Steel components

In Stair base detail (1043), you can now set on the Sbolts tab in which parts the slotted holes are created.

120389 Steel components

In Railings (S77), the Other rail to stanchion fittingadjustment of a part end

option on the Parameters tab now has a new value, Fit to stanchion.

130372 Steel components

In U.S. Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1047)
, the leveling plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

diameter is now correctly applied when using bolts.

130226 Steel components

In Seatcomponent object that represents a structure upon which a component secondary part rests

type 9 (73)
, the bolt assemblyset of bolt elements that consists of a bolt, a stud, or a screw, and possibly the related washers and nuts

options on the Bolts tab now work correctly.

54515 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(141)
, a manual notchcut in one component object or input part for receiving another component object or input part

in the bottom flange no longer causes a cut in the top flange.

92492 Steel components

In Pipe column and beam panel zone (21), the calculation of diaphragm thickness has now been improved. It can take into account the flange thickness of all beams and the thickness of columns according to the Japanese standard.

93561 Steel components

In Stub (133), the web plates are now positioned correctly when the stub web and the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

web have different thicknesses.

106278 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(141)
and Two sided clip angle (143), it is now possible to define plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

washers separately for the main and secondary bolts on the Plate washers tab.

103504 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1042)
and U.S. Base plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1047)
, it is now possible to set the material for Extra profile 1 and Extra profile 2 on the Extra plates tab.

106396 Steel components

In Moment connection (181), when inquiring stiffeners, the Finish property is now always empty.

110155 Steel components

In Bolted cap plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(27)
, the bolts now have a default tolerance of 2.0 mm in the UK environment.

110635 Steel components

In Bent plate(1) part that is created from contour plates, or beams whose profile is a plate

(1) Bent plates can be conical or cylindrical.

Curved beams, spiral beams, or deformed parts cannot be used for creating a bent plate.

(2) component object that represents an angle that is bent from a plate and that connects parts

(151)
, the weld backing barcomponent object that represents a structure that facilitates the welding process

Weld backing bars are used, for example, to help contain the weld metal or suspend the structure.

is now positioned correctly when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is skewed.

113323 Steel components

In Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
, the gusset plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

is now correctly placed when secondary parts are rotated.

114786 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(141)
and Two sided clip angle (143), the option to define the attach type now works correctly in the German environment.

118641 Steel components

In Pipe column and beam panel zone (21), you can now select a new chamfer type, Extra arc, for the corner of the inner diaphragm on the Fabrication Dimensions tab. The chamfered copecut in one component object or input part for receiving another component object or input part

consists of one arc and two straight segments.

118657 Steel components

In Pipe column and beam panel zone (21), the panel zone plates are given the appropriate plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

materials by default which are automatically converted from column type material to plate type material. Previously, column material was used. This works only in the Japan environment.

125702 Steel components

In Pipe column and beam panel zone (21), there was previously an error, for example when the component had four beams with different profile height and/or different levels. This has now been fixed.

129488 Steel components

In Railings (S77), some welds were previously not created correctly when creating an assembly to the first rail. This has now been fixed.

129207 Steel components

In Twin profilepart that represents two identical parts mirrored in relation to their position

Twin profile can be separated into two individual parts, after which it is no longer a twin profile.

connection plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1046)
, it is now possible to define an assembly prefix and start numberfirst number of a numbering series

for the plate.

129364 Steel components

In Full depth S (185), some cuts were previously not created correctly. This has now been fixed.

128292 Steel components

In Pipe column and Beam Panel Zone (21), you can now define each diaphragm material one by one on the Diaphragm tab. When you enter the materials, they override the definitions made on the Panel parts tab.

129770 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1004)
, the vertical slots in the shim platecomponent object that represents a plate that is used for filling clearances and gaps on the construction site

now work correctly.

129807 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1004)
, Stiffened base plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1014)
and Web stiffened base plate (1016), it is now possible to set the rotation type and rotation value for the shear keycomponent object that represents a short steel part welded to the bottom of a base plate

profile.

129848 Steel components

In Column with stiffeners W (182), entering a value to the Delete bolts option on the Bolts tab added the value to the Finish property of stiffeners. This does not happen anymore. The Finish property is now always empty.

129904 Steel components

In Corner tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(56)
, the chamfered connection plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

is now correctly positioned in all cases.

129991 Steel components

In Cast-in plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1069)
, in some cases, when using a clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

as the connection type, the welding was removed from the component. This has now been fixed.

130004 Steel components

In Haunchcomponent object that represents a wedge-like structure that strengthens a beam at its end

(40)
, it is now possible to set on the Haunch tab if the haunch profile is cut parallel at both ends.

106987 Steel components

In Wind column (5), parts are now created with the classpart property that groups parts according to identifiers given by the user

The identifiers of classes are usually numbers. Classes can be used for defining the color of parts in the model, for example. Class does not influence the numbering of model objects.

information defined on the General tab.

127479 Steel components

In Shear Pl simple (35), the top and bottom copecut in one component object or input part for receiving another component object or input part

cuts and weld preparationcut that is made on the part edge in order to enable a more complete weld penetration which provides a stronger joint

cuts now work correctly for beams with different flange widths or thicknesses.

130064 Steel components

In Gusseted cross (62), using double angles at the same time with a plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

connection no longer staggers the gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

bolts.

129582 Steel components

In Cast-in plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1069)
, the bolt orientation option now works when using an angle as the connection type.

54587 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
, the end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

is now correctly created when the brace connection is notched around the nuts.

127819 Steel components

In Bent plate(1) part that is created from contour plates, or beams whose profile is a plate

(1) Bent plates can be conical or cylindrical.

Curved beams, spiral beams, or deformed parts cannot be used for creating a bent plate.

(2) component object that represents an angle that is bent from a plate and that connects parts

(151)
, it is now possible to define the primary bolted part for the secondary bolts on the Bolts tab.

130175 Steel components

In Full depth S (185) and JP Full depth special (185), the assembly prefix and start numberfirst number of a numbering series

for the tab plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

are now correctly set to the default values when left empty in component dialog box.

102092 Steel components

In Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
, the bolt length increase defined on the Gusset bolts and Brace bolts 1-3 tabs is now correctly applied.

105627 Steel components

In Two sided end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(142)
, the classpart property that groups parts according to identifiers given by the user

The identifiers of classes are usually numbers. Classes can be used for defining the color of parts in the model, for example. Class does not influence the numbering of model objects.

of End plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

1
and End plate 2 no longer changes when defining the size of the end plate.

130077 Steel components

In Gusseted cross (62), slotted holes are no longer created for the bolts on the bracing side.

129501 Steel components

In Haunchcomponent object that represents a wedge-like structure that strengthens a beam at its end

(40)
, defining a negative dimension for the vertical bolt groupgroup of bolts that forms a connecting building object between an assembly main part and secondary parts

The number of bolts in a bolt group depends on the bolt group shape and the values of bolt distances.

position no longer affects the position of the cap plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

.

120139 Steel components

In Gusseted cross (62), the bolt offset from the edge of the L profile is now applied correctly for brace bolts 1-3.

113585 Steel components

In U.S. Seatcomponent object that represents a structure upon which a component secondary part rests

connection 2 (73)
, stabilizer weldings can now be defined using welds number 4 and 5.

117862 Steel components

In Column tube seating (100), it is now possible to align the end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

with the secondary parts or with the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

on the Parts tab.

98573 Steel components

In Stub (133), the stub upper and lower flange chamfers were sometimes missing. This has now been fixed.

130741 Steel components

Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
: Bolt spacing with weld gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

option is now working correctly.

128957 Steel components

Offshore (9): Welds number 2, number 4 and number 5 are now created on both sides of the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

web.

118520 Steel components

In Beam prep (183), the welds on the upper and lower flange of the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

are now correctly created when connecting to the column web.

92440 Steel components

In Round joining plates (124), it is now possible to create a circle holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

in the base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

when the base plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

is created as a contour platepart whose outline form the user defines by picking three or more points

The user can define the shape of the contour plate parallel to the work plane. The profile in use defines the thickness. The corners of the contour plate can be chamfered.

.

83644 Steel components

In Full depth S (185), the haunchcomponent object that represents a wedge-like structure that strengthens a beam at its end

plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

is now correctly positioned when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is sloped.

89938 Steel components

In Stiffened shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(17)
, the stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

is now correctly created when you define its setbackdistance between a part end and its reference point

In Tekla Structures, knock-off dimensions are an example of setback distances.

.

129708 Steel components

In Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11),
 the rectangular gusset plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

no longer gets a new ID after you click Modify.

130521 Steel components

In Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
, the gusset offset from bracing is now correctly applied.

80705 Steel components

In Bracing cross (19), slotted holes for bolts are now correctly applied.

82566 Steel components

In Partial stiff end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(65)
, it is now possible to define bolt rotation on the Bolts tab.

85772 Steel components

In Stub (28), it is now possible to define top and bottom offsets for all stiffeners.

125253 Steel components

In Simple clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(31)
and Two side clip angle (33), it is now possible to define the Finish property for all parts on the Parts tab.

125200 Steel components

In Column site weld splice (137), welds 3 and 4 are now created with the correct settings as defined in the component weld dialog box.

88193 Steel components

In Splice connection (77), deck support plates are now always created at the top flange when the main and secondary parts are sloped.

83167 Steel components

In End platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(144)
, the top and bottom notchcut in one component object or input part for receiving another component object or input part

chamfer cuts are now created with the correct dimensions.

83642 Steel components

In U.S. Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1047)
, increasing the bolt pattern size (spacing) now automatically increases the plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

size.

84567 Steel components

In Diagonal splice (53), the vertical offset of bolts is now correctly applied on all bolts.

85709 Steel components

In Multiple stiffeners (1064), the stiffeners are now created with the correct length also when created not perpendicular to the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

.

103709 Steel components

In Stanchion side profile (86), it is now possible to set the top edge distance of bolts on the Sbolts tab.

113645 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
, the end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

is now correctly welded to the connection plates when the connection plates are not inside the bracing.

122599 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
, the stiffeners are now created inclined to the gusset side angles, and it is possible to fit them to the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

.

125698 Steel components

In Stub connection (119), the middle plates and bolts are now created correctly when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is skewed.

130702 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1004)
, the horizontal slots in shimcomponent object that represents a plate that is used for filling clearances and gaps on the construction site

plates are now correctly created.

131086 Steel components

In Cast-in plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1069)
, aligning the bolts with the beam instead of the clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

no longer affects bolt and clip angle positioning.

131087 Steel components

In Cast-in plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1069)
, aligning the bolts with the beam instead of the clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

no longer deletes the clip angle.

131120 Steel components

In Multiple stiffeners (1064), weld preparationcut that is made on the part edge in order to enable a more complete weld penetration which provides a stronger joint

cuts are now correctly created when the XS_AISC_WELD_MARK advanced option is set to TRUE.

115478 Steel components

In Metsec Mezzanine floor ties (38), a holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

is now positioned in the mezzanine floor beam where the rod protrudes through.

90209 Steel components

In Corner bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(57)
, the gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

between the beam and the gusset is now correctly applied.

97507 Steel components

In Wraparound gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(58)
, the bolt assemblyset of bolt elements that consists of a bolt, a stud, or a screw, and possibly the related washers and nuts

option on the Gusset bolts 1 tab and Gusset conn 2 tab now works correctly.

101901 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, a double set of bolts is no longer created when using C profiles as secondary parts.

102068 Steel components

In Full depth S (185), chamfers are now correctly applied on the tab plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

.

123135 Steel components

In U.S. Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1047)
, one row of bolts (anchors) is now centered on the column.

123401 Steel components

In Column with stiffeners W (182), the weld preparationcut that is made on the part edge in order to enable a more complete weld penetration which provides a stronger joint

cuts are now created correctly when XS_AISC_WELD_MARK is set to TRUE.

129422 Steel components

In Railings (S77), the distance that sets the position of the bend end closure of middle rails can now be set to 0.

131288 Steel components

In Full depth S (185), when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is skewed, the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

is now cut correctly parallel to the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

web.

131147 Steel components

In Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
, it is now possible to set the bolting direction of Gusset bolts, Brace bolts 1-3, and Angle bolts.

92089 Steel components

In Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
, it is now possible to delete bolts on the Brace bolts 1 - 3 tabs.

103815 Steel components

In Portal bracing (105), it is now possible to set the name of the gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

, and also, it is now possible to set slotted holes, bolt assemblyset of bolt elements that consists of a bolt, a stud, or a screw, and possibly the related washers and nuts

and bolt length increase for Bolts 1-3.

131192 Steel components

In Tube crossing (22), it is now possible to set the Finish property for all parts.

131059 Steel components

In New notchcut in one component object or input part for receiving another component object or input part

(49)
, it is now possible to define separate values for the top and bottom flange, and the web chamfers.

130763 Steel components

In LProf base detail (1020), it is now possible to define the bolting direction.

120182 Steel components

Tapered beam to tapered beam (200) now ignores welded parts that are not longer than half the length of the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

or secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

.

105965 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(141)
, slotted holes are now correctly applied on the secondary bolts when using a wrapped angle connection.

92096 Steel components

In Haunchcomponent object that represents a wedge-like structure that strengthens a beam at its end

(40)
, web extra plates are now always positioned on the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

web when the main and secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

center lines are not in line.

131576 Steel components

In Tube crossing (22) and Corner tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(56)
, the double connection plates are now correctly positioned when defining the size of the slot cut in the brace.

131330 Steel components

In Multiple stiffeners (1064), the part name of the left and the right stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

is now correctly applied.

131293 Steel components

In Circular base plates (1052), it is now possible to create round cast plates.

130965 Steel components

In Column with stiffeners W (182), Column with stiffeners (186), Column with stiffeners S (187) and Column with stiffeners (188), the assembly prefix and start numberfirst number of a numbering series

are now correctly applied when connecting to the column flange.

130757 Steel components

In Wraparound gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

cross (60)
, the bolt length increase is now correctly applied on Gusset conn 1 bolts and Gusset conn 2 bolts.

90386 Steel components

In HSS Brace special (67), it is now possible to create a round slot cut in the brace.

90385 Steel components

In HSS Brace special (66), it is now possible to create a round slot cut in the brace.

91959 Steel components

In Stiffened shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(17)
, stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

chamfers now work correctly.

100958 Steel components

In Joist seatcomponent object that represents a structure upon which a component secondary part rests

(58)
, it is now possible to control the bottom chord dimension.

113205 Steel components

In Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(196)
, it is now possible to use sub-componentcomponent in a nested component that is subordinate to another component

Tube crossing (22) for round bar profiles.

130795 Steel components

In Column splice (42), the web bolts are now positioned correctly.

131142 Steel components

In Tensioner brace and compression bar (13), when using Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
as a sub-componentcomponent in a nested component that is subordinate to another component

, the component no longer breaks the main and secondary parts.

131152 Steel components

In Column seating (39), it is now possible to define the distance between the end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

and the secondary parts.

77330 Steel components

In Wraparound gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(58)
, Wrapped cross (61), Gusseted cross (62) and Corner wrapped gusset (63), you can now create shimcomponent object that represents a plate that is used for filling clearances and gaps on the construction site

plates when connecting braces to the gusset using clip angles.

77753 Steel components

In Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
, the slot cuts in the braces are now correctly created when the braces are on different planes.

83588 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(141)
, the gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

between the flange and the stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

now works correctly.

106612 Steel components

In Wraparound gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

cross (60)
, Hollow brace wraparound gusset (59), Corner bolted gusset (57), Corner tube gusset (56), Tube crossing (22), Tube gusset (20) and Tube splice (6), it is now possible to make a round slot in the bracing.

103285 Steel components

In Box girder (S13), the position in plane offset, position in depth offset, and rotation offset are now correctly applied.

123779 Steel components

In U.S. Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1047)
, you can now set the assembly prefix and start numberfirst number of a numbering series

for plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

washers and extra plates.

130785 Steel components

In Tab plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(33)
, you can now select in which part the slotted holes are created.

130854 Steel components

In Column seating (39), you can now create galvanizing holes in the end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

on the new Holes tab.

130855 Steel components

In Seating cap (37), you can now create galvanizing holes in the end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

on the new Holes tab.

130978 Steel components

In Haunchcomponent object that represents a wedge-like structure that strengthens a beam at its end

(40)
, you can now define the bolting direction on the Bolts tab.

131111 Steel components

In Railings (S77), you can now define the direction of the used connection on the Rails tab.

131251 Steel components

In Generation of purlins (50), all purlins are now placed properly according to each selected beam surface.

131415 Steel components

In U. S. Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1047)
, the cast plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

holes are now correctly positioned.

131419 Steel components

In Tapered beam 2 (S45), the material of the bottom flange profile is now the same as the material of the top flange profile.

131574 Steel components

In Cast-in plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1069)
, when defining the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

setbackdistance between a part end and its reference point

In Tekla Structures, knock-off dimensions are an example of setback distances.

, plate washers are now correctly positioned.

90072 Steel components

In Shear Pl simple (35), when the bolt standard is left to the default value in the component properties dialog box, the bolts are now created using the bolt standard defined in File menu > Settings > Options > Components.

120585 Steel components

In Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
, the gusset plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

is now positioned to the correct side when you define the plate height.

111550 Steel components

In U.S. Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

connection (71)
, you can now define an assembly prefix and a start numberfirst number of a numbering series

for beam stiffeners.

122485 Steel components

In Shear Pl simple (35), you can now define an assembly prefix and a start numberfirst number of a numbering series

for the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

.

125252 Steel components

In HSS Brace special (66) and HSS Brace special (67), you can now define the Finish property for all parts.

131673 Steel components

In Truss (S78), the bottom chord no longer gets a new ID after you have modified the component.

77334 Steel components

In Wraparound gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(58)
, Wrapped cross (61), Gusseted cross (62) and Corner wrapped gusset (63), you can now control the brace flange bolts spacing from the heel of the angle or from the center of the brace.

125279 Steel components

In Offshore (9), you can now create cuts that follow sloped flanges.

113087 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, slotted holes are now correctly applied on secondary bolts when using safety connections.

71687 Steel components

In Splice connection (77), flange bolts are now created correctly when the top and bottom internal and external plates do not have the same thickness.

TTSD-5316, 131260 Steel components

Previously, if you closed steel1.exe from the taskbar, Tekla Structures stopped working. This has now been fixed.

79884 Steel components

In Tapered column base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1068)
, you can now create a groutbuilding object that represents the filling of seams between parts, or holes or voids in a part with grout

Grouting can be used when connecting parts with anchor bolts or rods, or in seams between panels, for example.

Grout is flowing concrete that hardens after application.

plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

.

130989 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(141)
, bolts are now correctly created when you set them to be parallel to the sloped secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

.

131796 Steel components

In Web stiffened base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1016)
, creating a holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

in the washer no longer affects the upper horizontal stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

width.

131282 Steel components

Stanchion double plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(87)
now works correctly when the Up directionconnection or detail property that indicates how the created connection is rotated around the component secondary part, or the created detail around the component main part, relative to the current work plane

The up direction options are +x, -x, +y, -y, +z, -z, and auto.

is set to Auto.

79946 Steel components

In Turnbuckle bracing (S3), a gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

is no longer created between the fastener and the gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

when using the Battledore connection type.

80007 Steel components

In Shear Pl Simple (35), defining the Top Web Ext height no longer affects the position of the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

.

102290 Steel components

In U.S. Hip & Valley (179), the bolt horizontal edge distances are now correctly applied on the bolts.

105958 Steel components

In Bolted moment connection (134), the flange plates are no longer offset vertically when wider than the column.

115864 Steel components

In Rectangle to circle (17), when creating four cuts on objects that are not centered, the cuts are now created correctly.

116722 Steel components

In Two side endplate (34), the bolts that are not shared by parts are no longer offset from other bolts when connecting to a rotated main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

.

122177 Steel components

In Column with stiffeners W (182) and Column with stiffeners (188), the gaps between the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

and top or bottom secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

flanges are now correctly applied as defined on the Beam cut tab.

123399 Steel components

In Stanchion double plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(87)
, when the part prefix and start numberfirst number of a numbering series

of the connection plate are not defined, the component now uses the setting from File menu > Settings > Options > Components.

73599 Steel components

In Two sided end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(142)
, there is now a new option on the Bolts tab for measuring the horizontal bolt groupgroup of bolts that forms a connecting building object between an assembly main part and secondary parts

The number of bolts in a bolt group depends on the bolt group shape and the values of bolt distances.

position. The new Web option measures the bolt group position from the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

web.

131101 Steel components

In U. S. Seatcomponent object that represents a structure upon which a component secondary part rests

connection 2 (73)
, both stabilizer welds are now created vertically.

111551 Steel components

In Multiple stiffeners (1064), you can now define the assembly prefix and start numberfirst number of a numbering series

for the left and right stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

.

132173 Steel components

In Tube splice (6), you can now control the creation of cuts in the end plates.

131982 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
, the bolt type for brace bolts 1-3 now works correctly.

131580 Steel components

In Turnbuckle connection (126), the fittingadjustment of a part end

of the main and secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is now correctly created.

131707 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(141)
, the slotted holes for the top and bottom primary bolts in the angle box are now correctly applied.

132020 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1004)
, when using U shape anchor rods and hook direction of type 3 or type 4, the created parts are now correctly attached to the anchor rod.

131749 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, the gauge dimension on the Bolts tab is now correctly applied when the web clearanceset space between objects

In bolted connections, clearance is required for entering and tightening the bolts with an impact wrench. In addition to this, there may be a clearance for a fillet.

In welded connections, clearances are required in order to allow a welder to lay a correct weld.

Reinforcing bar clearance defines the minimum clearance or the allowed overlap for reinforcing bars when they are checked against other objects.

option is set on the Parts tab.

132085 Steel components

Shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

tube column (189)
no longer crashes when it is used with one secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

and you define the distances between the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

and the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

edges.

131712 Steel components

In Splice plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

2 (62)
, flange bolts are now correctly created when the main and secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

flanges are offset.

83846 Steel components

Tube seatcomponent object that represents a structure upon which a component secondary part rests

(104)
now works correctly for rectangular profiles.

89996 Steel components

In Welded column with stiffeners (128), the bottom inner weld backing barcomponent object that represents a structure that facilitates the welding process

Weld backing bars are used, for example, to help contain the weld metal or suspend the structure.

is now correctly positioned.

131503 Steel components

In Welded column with stiffeners (128), the position numberidentifier that is assigned to all similar parts, assemblies, cast units, or reinforcement

Position number consists of a prefix, separator, and running number. The prefix is part of the position number, identifying a numbering series. The running number is part of the position number, and is the assigned number in the numbering series, based on the start number. The separator is an optional character, such as a slash, that separates the prefix and the running number.

In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

In the US, the term piece mark or ship mark is used to refer to a position number.

, material and name of stiffeners are now correctly applied.

131383 Steel components

In 2L Splice (152), the primary bolts are now created to the correct positions for both beams.

131946 Steel components

In Column with stiffeners (186), all stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

welds now get the same default values.

79629 Steel components

Stiffened end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(27)
now works in the same way for C profiles as for U profiles.

94101, TSAC-617 Steel components

In Standard gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(1065)
, the vertical offset of the gusset is now correctly applied when creating the gusset to the above or below position.

131194 Steel components

In Joining plates (14), bolts are now created correctly for larger gaps between end plates.

79922 Steel components

In Beam prep (183), the weld backing barcomponent object that represents a structure that facilitates the welding process

Weld backing bars are used, for example, to help contain the weld metal or suspend the structure.

is now correctly positioned for sloped secondary parts.

TSAC-318, 123423 Steel components

In Cranked beam (41), you can now define parallel haunchcomponent object that represents a wedge-like structure that strengthens a beam at its end

end cuts on the Parameters tab.

TSAC-317 Steel components

In Two sided end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(142)
, galvanized holes are now created when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

center lines are not in line.

TSAC-281 Steel components

New notchcut in one component object or input part for receiving another component object or input part

(49)
now works correctly for short secondary parts.

TSAC-239 Steel components

In Cast-in plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1069)
, the horizontal bolt groupgroup of bolts that forms a connecting building object between an assembly main part and secondary parts

The number of bolts in a bolt group depends on the bolt group shape and the values of bolt distances.

position from the end of the secondary beam and the edge distance of bolts is now correctly applied.

TSAC-180 Steel components

In Beam prep (183), the weld backing barcomponent object that represents a structure that facilitates the welding process

Weld backing bars are used, for example, to help contain the weld metal or suspend the structure.

offset is now correctly applied when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is sloped.

TSAC-186 Steel components

In Bolted moment connection (134), welds for stiffeners are now correctly created when connected to the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

flange.

TSAC-312 Steel components

In Turnbuckle bracing (S3), the rod depth offset is now correctly applied.

TSAC-300, 131220 Steel components

Stiffened end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(27)
and Partial stiff end plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(65)
now work correctly when you create an end plate smaller than half the height of the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

.

TSAC-682 Steel components

In Beam with stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

(129)
, the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

edge distance from the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

flange edge is now correctly applied.

TSAC-683 Steel components

In Cast-in plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(1069)
, the horizontal edge distance is now correctly applied when using an angle profile to connect the beam and the cast plate.

TSAC-713 Steel components

In Purlin connections (11), when you define that one main bolt is created, the correct number of bolts is now created.

TSAC-709 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
, when you define a negative value for the brace length on the connection plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

, the end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

edge distances from the brace outer edge are now correctly applied.

TSAC-784 Steel components

In Joist to Beam and Col. (164), you can now again define the angle position numberidentifier that is assigned to all similar parts, assemblies, cast units, or reinforcement

Position number consists of a prefix, separator, and running number. The prefix is part of the position number, identifying a numbering series. The running number is part of the position number, and is the assigned number in the numbering series, based on the start number. The separator is an optional character, such as a slash, that separates the prefix and the running number.

In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

In the US, the term piece mark or ship mark is used to refer to a position number.

, material and name on the Stabilizer tab.

TSAC-103 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(116)
, slotted holes are now created for all bolts.

TSAC-106 Steel components

In Bracing wrap around (46), the weld between the gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

and secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is now not created when you define the size of the weld as 0.

TSAC-108 Steel components

In Splice plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

2 (62)
, the shim platecomponent object that represents a plate that is used for filling clearances and gaps on the construction site

thickness is now rounded to the market size only if the thickness of the plate is smaller than the gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

the plate fills.

TSAC-252 Steel components

In Bolted moment connection (134), Moment connection (181), Column with stiffeners W (182), Column with stiffeners (186), Column with stiffeners S (187) and Column with stiffeners (188), when you create stiffeners to follow the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

slope, the distances from the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

web or flange and the stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

edge are now correctly applied.

TSAC-275 Steel components

In HSS brace special (66), the cap plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

width and height is now correctly applied as defined in the dialog box of the component.

TSAC-277 Steel components

In Multiple stiffeners (1064), stiffeners are now not created when you set them to zero (0) height at the top half.

TSAC-620 Steel components

In Bolted moment connection (134), Moment connection (181), Column with stiffeners W (182), Column with stiffeners (186), Column with stiffeners S (187) and Column with stiffeners (188), creating a doubler platecomponent object that represents a structure that strengthens a steel beam web or steel column web by thickening it

on the near side or both sides no longer breaks the geometry of the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

. Also, welds between the shear tab and the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

or doubler plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

are now correctly created.

TSAC-874 Steel components

In Column - 2 beam, you can now define the slotted holes, bolt assemblyset of bolt elements that consists of a bolt, a stud, or a screw, and possibly the related washers and nuts

and bolt length increase on the Bolts 1-2, Bolts 3 and Bolts 4 tabs.

TSAC-872 Steel components

In Column with stiffeners W (182), the option on the Beam cut tab to not create beam end preparation no longer breaks the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

geometry.

TSAC-583 Steel components

Linear array tool and Radial array tool now correctly copy the user-defined attributes (UDAs) of the original, copied object.

TSAC-586 Steel components

When using Radial array tool to copy objects, the polygon cuts, line cuts and fittings now work correctly when the copied object clashes with the original objects or neighboring parts.

TSAC-589 Steel components

Objects with polygon cuts can now be copied again using Radial array tool.

TSAC-591 Steel components

Objects with polygon cuts can now be copied again using Linear array tool.

TSAC-593 Steel components

Deleting objects copied using Linear array tool now also deletes the cuts and fittings that were in the copied objects.

TSAC-600 Steel components

Linear array tool and Radial array tool now copy the components and cuts of the original, copied object.

TSAC-192 Steel components

Rebar holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

now uses an existing bolt size and adjusts the hole tolerance value until the desired Hole diameter is reached.

TSAC-534 Steel components

Previously, changing the surfacing attributes in the No paint area component caused Tekla Structures to crash. This happened at least in the French environment. This has now been fixed.

TSAC-798 Steel components

In Rebar holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

, you can now use imperial values for Hole diameter. The Hole type option now works correctly when set to Part cutcut that is defined by a cutting part

or Bolt hole + Part cut.

TSAC-838 Steel components

Objects with polygon cuts are now copied correctly with Radial array tool regardless of how the points to input the polygon cuts are picked.

TSAC-992 Steel components

In Shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

simple (146)
, the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

is now correctly created when created close to the end of the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

.

TSAC-276 Steel components

In Joining plates (14), when defining shimcomponent object that represents a plate that is used for filling clearances and gaps on the construction site

plates, the end platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

on the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

does not move anymore and the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is adapted.

TSAC-989 Steel components

In Full depth S (185), the tab plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

between the parts with a U profile was previously incorrectly created. This has now been fixed.

TSAC-993 Steel components

In Shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

tube column (189)
, the recesses in the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

are now correctly created when connecting to one secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

.

TSAC-986 Steel components

Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
now has improved functionality when connecting twin profiles created as plates.

TSAC-940 Steel components

In Column with stiffeners W (182) and Column with stiffeners S (187), the shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

no longer expands its length after each modify when the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

is welded from plates.

TSAC-1329 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(141)
, the plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

washers are now correctly positioned when the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

is a column.

TSAC-1305 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(116)
and Two sided clip angle (117), the Thread in material option now works correctly for all bolts.

TSAC-1307 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(116)
, you can now define a name for the L profile.

TSAC-1308 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(117)
, you can now define L profile names.

TSAC-1331 Steel components

In Moment connection (181), deleting of bolts now works correctly.

TSAC-1332 Steel components

In Full depth (184), it is now possible to create a stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

determined by a shear tabcomponent object that represents a plate welded to the component main part and bolted to the web of the component secondary part

.

TSAC-272 Steel components

Haunchcomponent object that represents a wedge-like structure that strengthens a beam at its end

(40)
: Bolts group is now correctly created when you specify to create an Upper bolt plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

.

TSAC-1482 Steel components

In Wraparound gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(58)
, the end gusset bolted to the beam or column does not disappear anymore.

TSAC-1439 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
, you can now set the bolt assemblyset of bolt elements that consists of a bolt, a stud, or a screw, and possibly the related washers and nuts

type separately for the bolts on the gusset side and the bracing side.

TSAC-1560 Steel components

Stanchions (S76) no longer crashes when a user defines a long part prefix.

TSAC-808 Steel components

Kingspan Eaves beam restraint (16) brackets to eaves beam now work correctly.

TSAC-1531 Steel components

In Sheal Pl Simple (35), you can now create round corners for copecut in one component object or input part for receiving another component object or input part

cuts.

TSAC-244 Steel components

In Bolted moment connection (134), you can now cut the flange plates parallel to the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is sloped.

TSAC-1367 Steel components

In Spiral stair (S68), the stairs are now created correctly when input points 2 and 3 are not located on the top of each other.

TSAC-916 Steel components

Stanchion double plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(87)
now works correctly regardless of how the stanchion is rotated.

TSAC-1578 Steel components

In Bolted cap plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

(27)
, the dimensions entered for stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

chamfers are now correctly applied.

TSAC-1536 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, the deletion of bolts now works correctly.

TSAC-1559 Steel components

In Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1004)
, the deletion of custom components now works correctly.

TSAC-1368 Steel components

Railing beam to plane (89) now works correctly with asymmetrical profiles.

TSAC-1434 Steel components

In Stiffened base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1014)
, the Groutbuilding object that represents the filling of seams between parts, or holes or voids in a part with grout

Grouting can be used when connecting parts with anchor bolts or rods, or in seams between panels, for example.

Grout is flowing concrete that hardens after application.

part name is not longer taken from the L profile, flange part name.

TSAC-1293 Steel components

In Column - 2 beam (14), the Bolt standard for Bolts 4 is now correctly applied.

TSAC-293 Steel components

In Shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

simple (146)
, the values for manual notchcut in one component object or input part for receiving another component object or input part

control are now correctly applied when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is skewed.

TSAC-1734 Steel components

In Seating (30), bolts are now created correctly when using plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

profiles.

TSAC-1772 Steel components

New notchcut in one component object or input part for receiving another component object or input part

(49)
no longer causes a solid error when created.

TSAC-1874 Steel components

In Truss (S78), the Material property boxes in component properties did not work in the US Imperial environment. This has now been fixed.

TSAC-1420 Steel components

In U.S. Seatcomponent object that represents a structure upon which a component secondary part rests

connection 3 (74)
, you can now define the stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

name, and seat profile material and name on the Parts tab.

TSAC-1770 Steel components

In U.S. Base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1047)
, the bolts are now correctly positioned when you define the rotation and the horizontal offset.

TSAC-1447 Steel components

In U.S. Seatcomponent object that represents a structure upon which a component secondary part rests

connection (72)
, slotted holes are now correctly applied for bolts.

TSAC-1445 Steel components

In Joist to column, type 2 (163), the bolt standards for seatcomponent object that represents a structure upon which a component secondary part rests

bolts are now correctly applied.

TSAC-1604 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(141)
, the clip angles are now positioned correctly when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is sloped.

TSAC-1922 Steel components

In Create holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

around part (92)
, holes were not created correctly around certain profiles. This has now been fixed.

TSAC-1622 Steel components

In Railing plane to plane (90), the connected parts are now correctly cut.

TSAC-1719 Steel components

Previously, there was an error when using Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
on an inclined main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

. This has now been fixed.

TSAC-302 Steel components

In Stiffeners (1003) and in Multiple stiffeners (1064), the gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

between stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

and beam is now correctly applied when stiffeners are created at the beam end.

TSAC-994 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
, the weld number 2 now works better.

TSAC-1961 Steel components

Stiffened base platecomponent object that represents a plate welded to a column base

Base plates are used to distribute the concentrated load of the column over a wider area.

(1014)
: on the Parts tab, the Classpart property that groups parts according to identifiers given by the user

The identifiers of classes are usually numbers. Classes can be used for defining the color of parts in the model, for example. Class does not influence the numbering of model objects.

 option has been added for Plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

, Web plates, Flange plates and Leveling plate. The Finish option has been added for Plate, Web plates, Flange plates, Leveling plate, Fittingadjustment of a part end

plates
, Additional beam, Horizontal plates and L profiles.

TSAC-1635 Steel components

Bolted gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(11)
: previously, sometimes there was a gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

between the gusset plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

and the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

. This has now been fixed.

TSAC-1864 Steel components

In U.S. Seatcomponent object that represents a structure upon which a component secondary part rests

connection 3 (74)
, the seat profile stiffeners are now created correctly regardless of the selection order of the secondary parts.

TSAC-1898 Steel components

In Fittingadjustment of a part end

(13)
, notchcut in one component object or input part for receiving another component object or input part

cuts are no longer created when the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

is a plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

.

TSAC-1902 Steel components

In Column with stiffeners (186) and Column with stiffeners S (187), the issue with the weld missing from between the stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

and the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

has been fixed.

TSAC-1963 Steel components

Tube crossing (22) now works correctly with negative brace notchcut in one component object or input part for receiving another component object or input part

distances.

TSAC-253 Steel components

In Column with stiffeners S (187), the bolt edge distance is now correctly applied with sloped beams.

TSAC-1718 Steel components

In Two side clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(33)
, the distance of the secondary bolts from the edge of the clip angle is now correctly applied.

TSAC-2018 Steel components

In Tensioner brace and compression bar (13), the Side where the levels are calculated for parts options are now calculated properly for cut/fitted main parts.

TSAC-1809 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, it is now possible to sort the secondary parts by their profile height. When set to Yes, the highest secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is always regarded as the first secondary part, regardless of the selection order.
The selection order of secondary parts no longer affects the copying of secondary parts.

TSAC-1489 Steel components

In Two sided clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(143)
, web clearanceset space between objects

In bolted connections, clearance is required for entering and tightening the bolts with an impact wrench. In addition to this, there may be a clearance for a fillet.

In welded connections, clearances are required in order to allow a welder to lay a correct weld.

Reinforcing bar clearance defines the minimum clearance or the allowed overlap for reinforcing bars when they are checked against other objects.

with the weld gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

option on the Parts tab now works correctly.

TSAC-2159 Steel components

In End platecomponent object that represents a plate welded perpendicular to the end of the component secondary part

(29)
, stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

material is now correctly applied.

TSAC-2133 Steel components

In Tube crossing (22), the spacing between two connection plates now works correctly.

TSAC-2124 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
, the end plates are now created correctly.

TSAC-1875 Steel components

In Column - 2 beam (14), there were previously issues when you created one plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

and the bolts were placed incorrectly. This has now been fixed.

TSAC-2369 Steel components

In Corner tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(56)
, you can now separately control the bolt types of Brace bolts 1 and 2 on the gusset side and the bracing side.

TSAC-2418 Steel components

In Turnbuckle connection (126), the main and the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

are now correctly fitted regardless their selection order.

TSAC-1459 Steel components

In Shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

tube column (189)
, the plate chamfer size now correctly follows the value defined in the component dialog box.

TSAC-796 Steel components

In Bent plate(1) part that is created from contour plates, or beams whose profile is a plate

(1) Bent plates can be conical or cylindrical.

Curved beams, spiral beams, or deformed parts cannot be used for creating a bent plate.

(2) component object that represents an angle that is bent from a plate and that connects parts

(151)
, the distances of bolts from the edge of the plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

are now correctly applied.

TSAC-2199 Steel components

In Full depth S (185), you can now define the tab plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

end cut on the Plates tab.

TSAC-1540 Steel components

In Column with stiffeners W (182), the stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

weld preparationcut that is made on the part edge in order to enable a more complete weld penetration which provides a stronger joint

now works properly.

TSAC-2230 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(141)
, weld 5 between the stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

and the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

is now created correctly.

TSAC-2309 Steel components

In Welded column with stiffeners (128), you can now turn on or off the weld preparationcut that is made on the part edge in order to enable a more complete weld penetration which provides a stronger joint

creation in the welds dialog box.

TSAC-2310 Steel components

In Welded beam column (31), you can now turn on or off the weld preparationcut that is made on the part edge in order to enable a more complete weld penetration which provides a stronger joint

creation in the welds dialog box.

TSAC-946 Steel components

In Welded beam to beam (123), the bottom flange notchcut in one component object or input part for receiving another component object or input part

size is now correctly applied.

TSAC-2456 Steel components

In Haunchcomponent object that represents a wedge-like structure that strengthens a beam at its end

(40)
, an unwanted chamfer was previously created on the partial stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

. This has now been fixed.

TSAC-2452 Steel components

In Rebar holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

, when Rounding type on the Parameters tab is set to Round by table and Hole type on the Advanced tab is set to Part cutcut that is defined by a cutting part

or Bolt hole + part cut, if the maximum rebar diameter value in the table is smaller than the rebar diameter defined in the rebar properties, Tekla Structures displayes a warning message: Rebar diameter from table is smaller than the rebar diameter from model.

TSAC-2563 Steel components

In Brace corner tubes & Pl (44), parts no longer get new a ID when modifying the component.

TSAC-2393 Steel components

Column with stiffeners S (187) now scans the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

geometry without cuts created outside the component.

TSAC-2386 Steel components

In Bolted moment connection (134), slotted holes for the lower flange platecomponent object that represents a plate that connects the flanges of a beam to a column

Flange plates are used in moment connections, for example.

are now applied correctly.

TSAC-2399 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
, previously, welding was not created when you only specified the below line weld properties for weld 2. This has now been fixed.

TSAC-2522 Steel components

In Cage ladder (S60), the parts welded to the ladder no longer lose welds when the component is modified.