Hello!

Did you know that logged in users can see a lot more content?

Fixes in Tekla Structures 2017

This page allows you to see the cumulative fixes up to the latest service pack. See the main release notes for Tekla Structures 2017 for information on new features and other major improvements.

Click the issue numbers to check which release(s) include the fix. You can also refer to the individual release notes for each release to check the included content.

Filters
Defect numbersort ascending Development area Description
TSAC-2771, TSAC-2769 Concrete components

In Floor layout, the component attribute file list is now properly shown for all components. Previously, it was not properly shown for Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars
, for example.

TSAC-2410 Concrete components

Seam applicator now again loads custom componentcomponent that the user creates and uses for creating model objects whose composition the user can modify as a group

seams.

TSAC-2134 Concrete components

Lifting anchor (80) now works correctly for elements created from concrete and miscellaneous materials.

TSAC-1930 Concrete components

In Embedded anchors (8), welds between the custom components and the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

are now correctly created.

TSAC-1895 Concrete components

In Corbels and recesses (82), when using the option to take cuts into account, the corbels are now correctly added to the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

.

TSAC-1878 Concrete components

In Braced girder (88) and Braced girder (89), the positions in plane and in depth are now correctly applied when creating the braced girder as a profile.

TSAC-1827 Concrete components

In Floor layout, break lines and detailing strips were deleted when using Tekla Model Sharingcloud service for collaboration and for storing and sharing a model

Tekla Model Sharing is one of the Tekla online services.

or when using the Repair model commands, as break lines and detailing strips did not create any objects in the model. Because of the missing break lines and/or detailing strips, the next modification of Floor layout created slabs without breaks and/or details. After this fix the break line and detailing strips create dummy construction lines and thus they will be preserved by Tekla Model Sharing and the Repair model commands.

TSAC-1804 Concrete components

In Reinforced concrete(1) cast unit type where the concrete is formed, poured, and cured in its final position

(2) concrete structure which contains reinforcement designed on the assumption that the concrete and reinforcement act together in resisting forces

(2) Reinforcement in reinforced concrete is usually steel bars, wires, or welded wire fabric. It may also be structural fiber of some other material.

(2) In Tekla Structures, reinforced concrete is modeled with reinforcement objects.

stair (95)
, at the bending of the top and bottom landings, the number of rebars created is now correct.

TSAC-1741 Concrete components

In Lifting anchor (80), the anchors are now created correctly when rotated perpendicular to the part.

TSAC-1695 Concrete components

In Detailing manager, you can now use Strip footingfooting that supports several points of contact or a region of points of contact

Strip footing supports a length of wall or a line of closely spaced columns, for example.

In Tekla Structures, strip footing has a polygon shape that the user defines by picking points.

reinforcement (75)
to detail a structure. Previously, Strip footing reinforcement (75) was not added to the Component box in the rules when you tried to add it.

TSAC-1678 Concrete components

In Concrete console (110), the bottom tube profile is now created correctly when using an HII profile as the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

.

TSAC-1675 Concrete components

In Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

panel reinforcement
, in some cases, the edge bars were not created if the edge contained a recess. This has now been fixed.

TSAC-1667 Concrete components

In Concrete console (110), anchor rods are now correctly placed when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is not placed in line with the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

.

TSAC-1643 Concrete components

Concrete console (110) now works correctly when the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

is cut above the component.

TSAC-1639 Concrete components

In Concrete console (111), the console is now correctly created when there is another component placed on the same level.

TSAC-1530 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
has been changed so that an opening which is not created for all layers is not taken into account when the layout is divided (by seams) into individual walls.

TSAC-1474 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars
, the selection filters for cuts are now shown in the list on the Detailing tab.

TSAC-1473 Concrete components

Concrete console (110): Cut around anchor rod is now correctly created when using HII profile as secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

.

TSAC-1407 Concrete components

Previously, Floor layout was cutting the smaller last slabplate that represents a concrete structure

In Tekla Structures, a slab is created by picking three or more points.

Slab may be part of a floor, for example.

and did not set the width of the profile even if you gave the placeholder [W]. This has now been fixed. In addition, the handling of the allowed widths (in FloorLayout.ini) has been changed so that it is possible to give the profile name with [W] to control the allowed widths for parametric profiles.

TSAC-1324 Concrete components

In Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
, openings are now created in a wall layout that has a surface layer as the last layer.

TSAC-1300 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout seam
now works properly when adding seams to a wall layout that has a surface layer. Previously, seams were not added correctly if the surface layer was the last layer in the wall layout.

TSAC-1261 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars
, the bars are now created around all holes.

TSAC-1248 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout elementation
now splits wall layout elements when using the tool twice, first in the vertical direction and then in the horizontal direction, or the other way round.

TSAC-1184 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
has been modified to properly handle elementation in cases where the seam is intersecting only other seams, but not any of the edges of the original boundary. In addition, the elementation can handle cases where the opening edges intersect the original boundary.

TSAC-950 Concrete components

In Round column reinforcement (82), the main bars are now correctly distributed.

TSAC-934 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout layer swapping has been changed so that the actual swapping (of properties and UDAobject property created by the user in order to widen the range of predefined object properties

User-defined attributes are used when the predefined object properties are not sufficient but more properties are needed. For example, comment, locked, and erection status are user-defined attributes.

values) is made before any wall part creation. This way there is no extra modify action and numberingprocess of assigning position numbers to parts, cast units, assemblies, or reinforcement

In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

does not need to be reset during any wall layout modify operation.

TSAC-856 Concrete components

Detailing manager now uses Pad footingfooting that supports a single point of contact

Pad footing usually supports one column.

reinforcement (77)
when selected in the Detailing manager dialog box.

TSAC-833 Concrete components

In Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
, the wall geometry can now be modified normally even if some of the openings are not created for the first layer.

TSAC-817 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars
, the mesh is now created correctly regardless of the complexity of its polygon.

TSAC-800 Concrete components

In Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
, you can now again create a layer as a single part without any seams.

TSAC-793 Concrete components

In Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

panel reinforcement
, U reinforcing barreinforcement that represents a steel bar used to reinforce a concrete structure

The steel bars are usually ribbed and they are used to increase the tensile strength of concrete.

length now works properly.

TSAC-791 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout connector
now creates proper connections when the number of layers in a wall layout is more than 5, or when the parts at the corner are shorter than 1000 mm.

TSAC-786 Concrete components

In Floor layout, when you now extend the floor layout boundary at the layout start edge, the existing gaps and seams do not move or change. Previously, the gaps and seams moved or changed whenever the seam gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

was not zero and the boundary was enlarged at the start end.

TSAC-773 Concrete components

In Detailing manager, there are several improvements in rule tab handling.
Double-click a rule tab to:

  • Rename the rule tab. Previously, you right-clicked the tab to rename it.
  • Clear the information on the tab.
  • Close other tabs than the selected tab.
  • Close all tabs, including the first tab. Closing all tabs gives you a new empty first tab.
TSAC-772 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
has been changed so that the original subassembly prefix/start numberfirst number of a numbering series

is restored whenever some of the layer swappers is removed.

TSAC-711 Concrete components

In Embedded anchors (8), rebars are now taken into account when calculating the total weight of the cast unit.

TSAC-689 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars by area
, changing the value of the Up directionconnection or detail property that indicates how the created connection is rotated around the component secondary part, or the created detail around the component main part, relative to the current work plane

The up direction options are +x, -x, +y, -y, +z, -z, and auto.

option no longer causes an incorrect number of rebars to be created.

TSAC-674 Concrete components

In Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

panel reinforcement
, when creating a single layer of reinforcement, the C1 cover thickness setting does not affect the offset anymore.

TSAC-663 Concrete components

In Round column reinforcement (82), the main bars are now cut when there is a cut in the concrete, for column shoe, for example.

TSAC-662 Concrete components

You can now have 25 rule tabs in Detailing manager.

TSAC-658 Concrete components

In Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
, the following fixes have been made:

  • The wall geometry is now calculated correctly when there are two openings that touch or overlap.
  • The opening detailing componentcomponent for creating and assembling component objects for building a structure

    The term modeling tool is used in Tekla Structures until version 21.1.

    is now applied only for the main layer. Previously, it was applied separately for each layer part.
TSAC-629 Concrete components

In Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
, the minimum wall layout length is now 25 mm. Earlier, the minimum length was 100 mm.

132507 Concrete components

In Embedded anchors (8), you can now create the thickening part as a composite of 3 beams, defined by a polygon.

132301 Concrete components

In Floor layout, in a slabplate that represents a concrete structure

In Tekla Structures, a slab is created by picking three or more points.

Slab may be part of a floor, for example.

with a large opening in the center area of the slab, the minimum width of the neck on both sides of the slab is now checked no matter what end option (skewed / straight ) is selected. Earlier, the minimum width was not checked when both slab ends were set to skewed, with no need to check the end angles.

132245 Concrete components

In Floor layout and Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
, picking the points to create the floor layout or wall layout has been changed so that the floor or wall length is never rounded anymore when there is an exact snap pointpoint to which Tekla Structures snaps

. Previously, snapping to a gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planes

In Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines. It is also possible to show grids and grid line labels in drawings, and to modify grid properties in the drawings.

It is possible to have more than one grid in a model. For example, a large-scale grid for the entire structure, and smaller grids for some detailed sections.

point was overridden if the Ortho tool was in use.

132120 Concrete components

In Rectangular column reinforcement (83), when creating cranked rebars, you can now define the length separately for the side bars and corner bars on the Bar ends tab.

131864 Concrete components

When you set the Top in form face (FixedMainView) UDAobject property created by the user in order to widen the range of predefined object properties

User-defined attributes are used when the predefined object properties are not sufficient but more properties are needed. For example, comment, locked, and erection status are user-defined attributes.

in Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
on the UDA tab, Wall layout swapper now swaps the Back / Front values of the swapped wall parts. Otherwise, the value Back is set for all wall parts, as before.

131765 Concrete components

In Concrete console (110), there is now a new option on the Picture tab to cut the main column horizontally while the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is cut perpendicularly.

131760 Concrete components

In Concrete console (110), the neoprene is now correctly positioned when the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

is sloped.

131669 Concrete components

In Reinforced concrete(1) cast unit type where the concrete is formed, poured, and cured in its final position

(2) concrete structure which contains reinforcement designed on the assumption that the concrete and reinforcement act together in resisting forces

(2) Reinforcement in reinforced concrete is usually steel bars, wires, or welded wire fabric. It may also be structural fiber of some other material.

(2) In Tekla Structures, reinforced concrete is modeled with reinforcement objects.

stair (95)
, the radius value for the bottom end and top end rebars is now applied correctly on the Landings end bars tab.

131558 Concrete components

In Reinforced concrete(1) cast unit type where the concrete is formed, poured, and cured in its final position

(2) concrete structure which contains reinforcement designed on the assumption that the concrete and reinforcement act together in resisting forces

(2) Reinforcement in reinforced concrete is usually steel bars, wires, or welded wire fabric. It may also be structural fiber of some other material.

(2) In Tekla Structures, reinforced concrete is modeled with reinforcement objects.

stair (95)
, there is now a new option on the Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

attributes
tab for cutting the meshes.

131551 Concrete components

The Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
component has been changed to make an extra update for some additional sub-components applied to parts created/updated by Wall layout. The extra update is made for such sub-components which are truly dependent on the assembly hierarchyarrangement of assemblies that describes the manufacture and erecting of the actual assembly to be built

, not just the geometry of the part.
Currently there are three such sub-components: Braced girder, Embedded anchors (8) and Lifting anchor (80), which require an update after the assembly hierarchy has been completed. Earlier, an extra manual modify was required to get the result of the component to be updated properly.

131487 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
has been changed so that when the layout has a detailed opening and any layer which is not added to the main cast unit, a normal polygon cutcut that is defined by a polygon

(without any detailing componentcomponent for creating and assembling component objects for building a structure

The term modeling tool is used in Tekla Structures until version 21.1.

) is created to this layer (part).

131456 Concrete components

In Embedded anchors (8), when the Assembly without steel parts option is selected on the Placement tab, the component now correctly scans the assembly without steel parts.

131323 Concrete components

In Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout elementation
, the option to Avoid openings now works correctly. Earlier, the openings were always avoided, in other words, seams were never created at openings no matter which one of the options was selected.

131286 Concrete components

In Corbels and recesses (82), the Position in plane offsets are now correctly applied when creating corbels in the start or end plane of the part.

131262 Concrete components

In Lifting anchor (80), recess cuts now only cut parts whose material type is concrete or miscellaneous. Also, you can now create eccentric recess cuts.

131214 Concrete components

In Floor layout, the actual width of the last slabplate that represents a concrete structure

In Tekla Structures, a slab is created by picking three or more points.

Slab may be part of a floor, for example.

was previously changing (increased with half seam gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

) when it was moved by dragging it to some other location. This only happened when the default gap between the slabs was not zero (0 mm). This has now been fixed.

131145 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars
, negative cover thickness values now work correctly.

131037 Concrete components

In Concrete beam-beam (112), non-concrete parts can be now removed from the assembly.

131036 Concrete components

In Concrete console (110), the neoprene is now created in the correct position when the console is not created.

130973 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
has been changed to support encoding when reading the WallLayout.Udas.dat file, and thus any non-ascii characters are now read and shown in the user interface properly.

130967 Concrete components

In Lifting anchor (80), the lifting anchor is now attached to the correct concrete part.

130940 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars
, rebars are no longer created outside the selected part.

130750 Concrete components

In Reinforced concrete(1) cast unit type where the concrete is formed, poured, and cured in its final position

(2) concrete structure which contains reinforcement designed on the assumption that the concrete and reinforcement act together in resisting forces

(2) Reinforcement in reinforced concrete is usually steel bars, wires, or welded wire fabric. It may also be structural fiber of some other material.

(2) In Tekla Structures, reinforced concrete is modeled with reinforcement objects.

stair (95)
, horizontal ridges are now cut in the corner by a vertical line determined by the vertical ridge slope.

130524 Concrete components

Previously, anti-skid profiles created in Concrete stairs (65) were not included in IFCfile format commonly used in BIM that facilitates software interoperability

IFC is an open specification developed by the IAI (International Alliance for Interoperability).

Model can be exported into an IFC file.

export. This has now been fixed.

130419 Concrete components

In Rectangular column reinforcement (83), the intermediate links are now created correctly.

130381 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout connector
has been changed to create connections properly also when there are short walls in the wall layout corner.

130222 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars
, the reported mesh dimensions now take cuts into account.

130133 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars
, the maximum length of rebars is now unlimited.

130120 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars
, the mesh dimensions are now reported correctly, and they are correctly shown in the model.

129561 Concrete components

In Reinforcement meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

array in area (89)
and Reinforcement meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

array (91)
, there is now a new option, Mesh spacing type, on the Picture tab. You can now set the spacing type to Exact number. Use Exact number when the mesh has a specified number of spacings, like 1*100, in mesh_database.inp.

129506 Concrete components

Double wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

edge and opening reinforcement
now works correctly when the other shell is added as a sub-assemblyassembly in a nested assembly that is subordinate to a parent assembly

.

129334 Concrete components

In Holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

generation (32)
, you can now select an extra direction for rotation in any coordinate system.

129266 Concrete components

In Reinforced concrete(1) cast unit type where the concrete is formed, poured, and cured in its final position

(2) concrete structure which contains reinforcement designed on the assumption that the concrete and reinforcement act together in resisting forces

(2) Reinforcement in reinforced concrete is usually steel bars, wires, or welded wire fabric. It may also be structural fiber of some other material.

(2) In Tekla Structures, reinforced concrete is modeled with reinforcement objects.

stair (95)
, chamfers are now correctly changed when modified.

129103 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

Bars
, the direct modificationfunction that activates the mode where the model objects can be modified by using handles

Direct modification enables additional handles and modification options.

arrow symbol now correctly follows the bar direction. Previously, when you modified the bar direction by dragging the arrow symbol handles, only the bar direction changed, but the arrow symbol returned to its original position.

129068 Concrete components

In Reinforced concrete(1) cast unit type where the concrete is formed, poured, and cured in its final position

(2) concrete structure which contains reinforcement designed on the assumption that the concrete and reinforcement act together in resisting forces

(2) Reinforcement in reinforced concrete is usually steel bars, wires, or welded wire fabric. It may also be structural fiber of some other material.

(2) In Tekla Structures, reinforced concrete is modeled with reinforcement objects.

stair (95)
, when stringers are not created, the options for defining the stringers are now dimmed.

128824 Concrete components

In Reinforced concrete(1) cast unit type where the concrete is formed, poured, and cured in its final position

(2) concrete structure which contains reinforcement designed on the assumption that the concrete and reinforcement act together in resisting forces

(2) Reinforcement in reinforced concrete is usually steel bars, wires, or welded wire fabric. It may also be structural fiber of some other material.

(2) In Tekla Structures, reinforced concrete is modeled with reinforcement objects.

stair (95)
, the default stringer material is now Concrete_Undefined.

128788 Concrete components

In Reinforced concrete(1) cast unit type where the concrete is formed, poured, and cured in its final position

(2) concrete structure which contains reinforcement designed on the assumption that the concrete and reinforcement act together in resisting forces

(2) Reinforcement in reinforced concrete is usually steel bars, wires, or welded wire fabric. It may also be structural fiber of some other material.

(2) In Tekla Structures, reinforced concrete is modeled with reinforcement objects.

stair (95)
, it is now possible to set the bending of the reinforcement on the Bar E tab.

128786 Concrete components

In Reinforced concrete(1) cast unit type where the concrete is formed, poured, and cured in its final position

(2) concrete structure which contains reinforcement designed on the assumption that the concrete and reinforcement act together in resisting forces

(2) Reinforcement in reinforced concrete is usually steel bars, wires, or welded wire fabric. It may also be structural fiber of some other material.

(2) In Tekla Structures, reinforced concrete is modeled with reinforcement objects.

stair (95)
, there is now a new bar H geometry option on the Bar H tab.

128785 Concrete components

In Reinforced concrete(1) cast unit type where the concrete is formed, poured, and cured in its final position

(2) concrete structure which contains reinforcement designed on the assumption that the concrete and reinforcement act together in resisting forces

(2) Reinforcement in reinforced concrete is usually steel bars, wires, or welded wire fabric. It may also be structural fiber of some other material.

(2) In Tekla Structures, reinforced concrete is modeled with reinforcement objects.

stair (95)
, it is now possible to set the shape of the top reinforcement on the Bar D tab.

128736 Concrete components

In Sandwich wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

window
, cuts are now created correctly in the corners.

128646 Concrete components

In Border rebar (92) and Border rebar for single edge (93), when you do not define the rebar part prefix in the Serie option on the Advanced tab, the prefix is now empty in the rebar properties.

128569 Concrete components

In Beam reinforcement (63), Bar end cover now works correctly for beams that have an L-profile.

128548 Concrete components

In Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

panel reinforcement
, all reinforcing bars are now correctly attached to the cast unit.

128524 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars by area
, bars are again created only to the area defined by the polygon input.

128523 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars by area
, when modifying the polygon area around cuts, the bars are again cut correctly.

128498 Concrete components

In Embedded anchors (8), the bending radius of rebar A and rebar B now works correctly.

128407 Concrete components

In Rectangular column reinforcement (83), intermediate links do not clash with side bars anymore.

128400 Concrete components

In Concrete stairs (65), modifying the step inner chamfer radius now works correctly.

128095 Concrete components

Hollowcore reinforcement strands (60) does not crash anymore when used as a subcomponent in Floor layout which is edited using direct modificationfunction that activates the mode where the model objects can be modified by using handles

Direct modification enables additional handles and modification options.

.

128069 Concrete components

In Concrete beam-beam (112), the Parameters tab now has an option for perpendicular cuts on the underside of the beam.

128068 Concrete components

In Concrete console (110), the angle cut is now correct when the beam is created using offsets.

128067 Concrete components

In Concrete console (110), when defining on the Picture tab how the shape of the secondary beam is modified, you can now select to cut the column perpendicular to the secondary beam.

127941 Concrete components

In Pad footingfooting that supports a single point of contact

Pad footing usually supports one column.

reinforcement (77)
, the rebar length is now correct when creating straight rebars.

127879 Concrete components

In Stub connection (119), it is now possible to define the top and bottom offset of the top and bottom plates.

126938 Concrete components

In Embedded anchors (8), the default grade of reinforcing bars is now set to Undefined.

126882 Concrete components

In Sloping slabplate that represents a concrete structure

In Tekla Structures, a slab is created by picking three or more points.

Slab may be part of a floor, for example.

drainage
, you can now set the Cast unit typeproperty of a concrete part in a cast unit that defines if the structure type of the part is precast or cast in place

to either Cast in place or Precast.

126798 Concrete components

In Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

groove seam detail
, the groove edge dimension handling and the list of groove edge shapes now work correctly.

126769 Concrete components

In Electric box in wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

(84)
, the top and bottom connection edge offsets are now used correctly in all situations.

126663 Concrete components

In Anchor (10), the ID of the connection plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

is not changed anymore when the connection is modified.

125141 Concrete components

In Floor layout, the seam gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

dimension modification has been fixed so that the correct gap is modified. Earlier, the previous gap before the actual seam was always modified.

In addition, the handling of the seam gap now works better so that in practice it is possible to change the default seam gap also when one or more of the gaps has some other value than the default. Earlier, some (that is, all gaps “before” the last special gap) were not modified to match with the new default gap.

124872 Concrete components

In Meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars
, tapered group is now used only when needed. Previously, when the bars were spliced the group type was always set to tapered.

123031 Concrete components

Electric box in wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

(84)
now applies direction and rotation of custom componentcomponent that the user creates and uses for creating model objects whose composition the user can modify as a group

parts correctly. Previously, the custom component for the bottom connection was not correctly created, and when a custom component was created at a bend, then both (top and bottom) connections were created incorrectly.

122145 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

to wall connection
has been changed to work correctly when the wall is shorter than 4 times the thickness.

121999 Concrete components

Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

layout
has been changed so that seams crossing the openings now split the wall panels into two separate panels or cast units.

120780 Concrete components

In Holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

generation (32)
, modifying the component by adding roundings to hole corners now works correctly.

120053 Concrete components

In Rectangular column reinforcement (83), you can now create stirrups as a spiral group.

119699 Concrete components

In Concrete stairs (65), there was previously a solid error when the bottom stair length was smaller than 41 mm. This has now been fixed.

114418 Concrete components

In Reinforced concrete(1) cast unit type where the concrete is formed, poured, and cured in its final position

(2) concrete structure which contains reinforcement designed on the assumption that the concrete and reinforcement act together in resisting forces

(2) Reinforcement in reinforced concrete is usually steel bars, wires, or welded wire fabric. It may also be structural fiber of some other material.

(2) In Tekla Structures, reinforced concrete is modeled with reinforcement objects.

stair (95)
, you can now define an additional step chamfer on the Parts tab.

114030 Concrete components

In Floor layout, the new Default offsets tab contains the default offsets for each layer. These default offsets will be used whenever a specific value is not given for the edge.

112547 Concrete components

Rebar end trimming has been changed so that now it is possible to modify the end covers of rebars that have end anchors created with Rebar end anchor.

The Rebar end trimming dialog box now has two tabs: Rebar coupler and Rebar end anchor.
On the new Rebar end anchor tab, you can define the end cover thickness and anchor offset gapany space between two objects

The term gap is used in its general sense in Tekla Structures.

at the bar end.
By selecting Yes in the Get free gap from auto attribute file option, you can control the anchor offset with the attribute tables (.anchor.csv) in column AnchorOffset. Give the bar size specific values at each row.

If the anchor offset is not defined, the default value is the same as the anchor offset defined in the Rebar end anchor component.

9384 Concrete components

In Corbelconcrete part representing a structure that projects from the face of a concrete part and that serves as a support for an overhanging part and connects the parts

connection (14)
, Seating with dowel (75), Two sided seating with dowel (76), Seating with dowel to flange (77), and Two sided seating with dowel to flange (78), you can now choose to create the dowel as a reinforcement bar, poly-profile, or custom componentcomponent that the user creates and uses for creating model objects whose composition the user can modify as a group

part.

In Two sided seating with dowel (76), the Right dowel settings are now dimmed correctly on the Dowel tab.