Hello!

Did you know that logged in users can see a lot more content?

Release Notes - Tekla Structures 2018 SP5

Filters
Defect number Development area Descriptionsort descending
TTSD-23252 Drawings

Slanted symbols are now correctly printed and exported

TTSD-21616 Drawings

Slanted symbols are now correctly printed and exported.

TTSD-20722 Templates and reports

Support for showing numbers greater than 2^31 was added.

TTSD-22146 Numbering

Tekla Structures no longer crashes when renumbering objects.

TTSD-22652 Tekla Model Sharing

In Tekla Model Sharingcloud service for collaboration and for storing and sharing a model

Tekla Model Sharing is one of the Tekla online services.

, read in performance has been improved.

TTSD-14041 Import, export, interoperability

Point cloudgroup of measured points that are imported to Tekla Structures as one unit

Point clouds can be placed by the model origin or by a defined base point.

density issue with scaled point clouds has been fixed.

TTSD-18368 Drawings

Rebars of strirrup arc types now have correct length in pull-outsmall graphic in a reinforcement mark, table, or report template that shows the shape and dimensions of a reinforcing bar

pictures.

TSAC-2596 Drawings

Rebar groupgroup of reinforcing bars that are side by side and have identical properties, except the possible variation in bar lengths

dimensioning
: Invisible color can now be applied.

TTSD-23063 Import, export, interoperability

The IFCfile format commonly used in BIM that facilitates software interoperability

IFC is an open specification developed by the IAI (International Alliance for Interoperability).

Model can be exported into an IFC file.

object conversion did not handle or convert round cuts for plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

. This has now been fixed.

TTSD-20772 Import, export, interoperability

In IFCfile format commonly used in BIM that facilitates software interoperability

IFC is an open specification developed by the IAI (International Alliance for Interoperability).

Model can be exported into an IFC file.

export, the length of a holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

is now fixed to be material thickness plus the tolerance value.

TTSD-22391 Drawings

Rebar sets in drawings were not working correctly if drawings were cloned. This has now been fixed.

TSAC-946 Steel components

In Welded beam to beam (123), the bottom flange notchcut in one component object or input part for receiving another component object or input part

size is now correctly applied.

TSAC-1540 Steel components

In Column with stiffeners W (182), the stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

weld preparationcut that is made on the part edge in order to enable a more complete weld penetration which provides a stronger joint

now works properly.

TTSD-22045 Reinforcement

In some cases, rebar segment lengths were reported with slight inaccuracy. This has now been improved.

TTSD-21540 Drawings

Some drawing commands did not use correct info in Undo history. This has now been fixed.

TTSD-17876 Drawings

Removing dimension points from curved dimension could corrupt the whole dimension. This has now been fixed.

TTSD-22227 Drawings

Non-solid items are now shown correctly in drawings also when they are clipped with the view restriction box.

TSAC-2230 Steel components

In Clip anglecomponent object that represents a right angle that is made of a standard L-shaped profile and that connects parts

(141)
, weld 5 between the stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

and the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

is now created correctly.

TTSD-22194 Import, export, interoperability

DWG export file name does not have revision info added if the revision info is not present in the format string.

TSAC-2563 Steel components

In Brace corner tubes & Pl (44), parts no longer get new a ID when modifying the component.

TSAC-796 Steel components

In Bent plate(1) part that is created from contour plates, or beams whose profile is a plate

(1) Bent plates can be conical or cylindrical.

Curved beams, spiral beams, or deformed parts cannot be used for creating a bent plate.

(2) component object that represents an angle that is bent from a plate and that connects parts

(151)
, the distances of bolts from the edge of the plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

are now correctly applied.

TTSD-14607 Drawings

The new printing incorrectly displayed a watermark in drawings with the Educational stamp. This has now been fixed.

TSAC-2199 Steel components

In Full depth S (185), you can now define the tab plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

end cut on the Plates tab.

TTSD-22212 Tekla Model Sharing

In Tekla Model Sharingcloud service for collaboration and for storing and sharing a model

Tekla Model Sharing is one of the Tekla online services.

, canceling the start sharing was not possible during packet creation. This has now been fixed.

TSAC-2386 Steel components

In Bolted moment connection (134), slotted holes for the lower flange platecomponent object that represents a plate that connects the flanges of a beam to a column

Flange plates are used in moment connections, for example.

are now applied correctly.

TTSD-13217 User interface

When copying properties in the property panecontrol element in Tekla Structures user interface in the form of a side pane window

The property pane can be used to show and modify the properties of model objects.

, the check marks of the properties that you are copying now stay selected.

TSAC-2450 Import, export, interoperability (concrete)

BVBS Export: The user-defined bending roll diameter can now be controlled with the BVBS_BENDING_ROLL UDAobject property created by the user in order to widen the range of predefined object properties

User-defined attributes are used when the predefined object properties are not sufficient but more properties are needed. For example, comment, locked, and erection status are user-defined attributes.

.

TSAC-2522 Steel components

In Cage ladder (S60), the parts welded to the ladder no longer lose welds when the component is modified.

TSAC-2375 Drawings

Pattern line editortool in Tekla Structures that is used for creating and modifying pattern lines

Pattern line editor can be used in a model or in an open drawing.

The created pattern lines are added to drawings with the pattern line command.

saves the default color correctly in the created .clp file, so the pattern linedrawing shape that consists of one or several blocks of elements and that may include symbols, lines, and spacings.

Pattern lines can be used to indicate cut lines, foundations, weld paths, or electrical wiring, for example.

color can be modified.

TTSD-21996 Import, export, interoperability

Double-clicking the reference modelmodel which the designer can use as an aid when building another model

A reference model is created in Tekla Structures or in other software and can be inserted to Tekla Structures. The reference model appears together with the model but it is not modified by Tekla Structures. The user can snap to reference model points.

For example, an architectural model, a plant design model, or a heating, ventilating, and air-conditioning (HVAC) model can be a reference model.

group did not open the Group name dialog box. This has now been fixed.

TSAC-2456 Steel components

In Haunchcomponent object that represents a wedge-like structure that strengthens a beam at its end

(40)
, an unwanted chamfer was previously created on the partial stiffenercomponent object that represents a structure that strengthens a steel beam or column

Stiffeners are usually plates.

Stiffeners are used to prevent web buckling at supports or concentrated loads.

. This has now been fixed.

TSAC-2310 Steel components

In Welded beam column (31), you can now turn on or off the weld preparationcut that is made on the part edge in order to enable a more complete weld penetration which provides a stronger joint

creation in the welds dialog box.

TSAC-2419 Steel components

In Wraparound gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(58)
, the slotted holes for the additional bolts in clip angles are now applied correctly.

TSAC-2393 Steel components

Column with stiffeners S (187) now scans the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

geometry without cuts created outside the component.

TSAC-2514 Import, export, interoperability (concrete)

Export EliPlan file (68): Cuts created at diagonally cut slabs no longer affect the calculation of L1 and L2 values.

TTSD-22524 Modeling

Previously, when the Ortho tool was active, the snapping distances were incorrectly rounded. This has now been fixed.

TSAC-2333 Drawings

In dimensioning rule properties, the Dimension to setting for vertical dimensions is now read correctly from rule file.

TSAC-2309 Steel components

In Welded column with stiffeners (128), you can now turn on or off the weld preparationcut that is made on the part edge in order to enable a more complete weld penetration which provides a stronger joint

creation in the welds dialog box.

TSAC-2446 Import, export, interoperability (concrete)

BVBS Export: When multiple segments of rebar are in 0-degree bendings then is exported as the continuous straight section.

TSAC-2418 Steel components

In Turnbuckle connection (126), the main and the secondary part(1) part that exists in a building object and that is connected to the main part

(1) Secondary part can be an assembly secondary part or a cast unit secondary part.

(2) input part that the user selects after selecting the component main part when creating a component

(2) A component can have none, one or more component secondary parts.

are now correctly fitted regardless their selection order.

TSAC-2614 Import, export, interoperability (concrete)

Export Unitechnik (79): Reinforcing bars exported as embeds now have the bendings exported with correct projected geometry.

TTSD-19286 Drawings

An error could occur when double-clicking reinforcement drawing tools in the Applications & components cataloguser interface for displaying or modifying information in categorized lists

For example, profile catalog and shape catalog are catalogs.

. This has now been fixed.

TSAC-1459 Steel components

In Shear plate(1) part that represents a flat structure

(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

(2) plate that represents a steel structure

(2) Plate is mainly used as a connection piece or as a floor plate.

tube column (189)
, the plate chamfer size now correctly follows the value defined in the component dialog box.

TSAC-2400 Drawings

Rebar groupgroup of reinforcing bars that are side by side and have identical properties, except the possible variation in bar lengths

dimensioning
: The order of mark content elements is now correct in all use cases. The fix also applies to extra marks.

TTSD-21567 Tekla Model Sharing

In Tekla Model Sharingcloud service for collaboration and for storing and sharing a model

Tekla Model Sharing is one of the Tekla online services.

, profiles with a .clb file as a subtype were not previously shared correctly. This has now been fixed.

TSAC-1180 Drawings

Draw rebar pull-outs: Fixed a problem that in some cases pull-outsmall graphic in a reinforcement mark, table, or report template that shows the shape and dimensions of a reinforcing bar

pictures were also created from parts that were not selected by the user.

TTSD-21305 Drawings

The Flip outside dimension setting in dimension properties produced incorrect info to Undo history. This has now been fixed.

TSAC-2485 Core

The Dimensioning Rule Properties dialog box had many texts that were not translated but showed the string ID albl_... This has now been fixed.

TTSD-23449 Drawings

There were problems opening a drawing containing failing bolt solids. This has now been fixed and drawings can be opened even if there is a failing bolt solid.

TTSD-22317 Drawings

Sometimes in a drawing with a custom template and small section views, all surface treatments were not properly drawn in all of the views. This has now been fixed.

TTSD-22365 Drawings

Sub-assemblyassembly in a nested assembly that is subordinate to a parent assembly

welds in GA drawings now follow the same setting as the main assembly welds. There is no separate option to control sub-assembly welds in GA drawings.

TSAC-2399 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
, previously, welding was not created when you only specified the below line weld properties for weld 2. This has now been fixed.

TSAC-2644 Import, export, interoperability (concrete)

Export Unitechnik (79): The embedbuilding object that represents an object that is to be cast into a concrete structure and that is used to connect structures or as an aid when constructing a structure

For example, a cast-in socket is an embed that is placed in concrete structures to allow parts to be bolted together on site. In Tekla Structures, embeds are modeled as steel sub-assemblies that are inside a concrete nested assembly.

recognition has been improved in cases where both double wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

shells have the same hierarchy level in the assembly.

TTSD-21541 Drawings

The Arrange marks and Align marks commands did not use correct information in Undo history. This has now been fixed.

TSAC-2377 Steel components

In Tube gussetcomponent object that represents a plate that connects braces to a beam, column, or base plate

(20)
and Hollow brace wraparound gusset (59), the slotted holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

properties on the bracing side are now applied correctly.

TTSD-21637 Templates and reports

Radius symbols in rebar pull-outsmall graphic in a reinforcement mark, table, or report template that shows the shape and dimensions of a reinforcing bar

pictures in reports were sometimes incorrectly drawn after opening drawing, but correct after refreshing the report. This has now been fixed.

TTSD-20112 System and options

Tekla Structures no longer crashes when trying to select a material if the matdb.bin file is missing from the currently used environment folder.

TSAC-2690 Import, export, interoperability (concrete)

Export Unitechnik (79): Data is now read correctly from the Unitechnik Mountpart tab in the user-defined attributeobject property created by the user in order to widen the range of predefined object properties

User-defined attributes are used when the predefined object properties are not sufficient but more properties are needed. For example, comment, locked, and erection status are user-defined attributes.

properties for steel parts.

TSAC-2104 Drawings

Rebar pull-out picturesmall graphic in a reinforcement mark, table, or report template that shows the shape and dimensions of a reinforcing bar

and marking
: Rebar pull-outsmall graphic in a reinforcement mark, table, or report template that shows the shape and dimensions of a reinforcing bar

pictures dimension text placement has been improved. Previously dimensions were switched, this has now been fixed.

TTSD-21481 Modeling

Previously, selecting two bolts and right-clicking caused Tekla Structures to crash. This happened when the first part you had selected was a cast-in-place part. This has now been fixed.

TTSD-17047 Modeling

The silhouette edges are drawn correctly again for high accuracy hollow profiles when XS_DISPLAY_FILLET_EDGES is set to FALSE.

TTSD-23046 Tekla Model Sharing

Previously, if Tekla Structures crashed or if the Tekla Structures process was somehow forced to exit during write out, this could result in missing drawing files. This has now been fixed.

TSAC-2621 Drawings

Rebar pull-out picturesmall graphic in a reinforcement mark, table, or report template that shows the shape and dimensions of a reinforcing bar

and marking
: The pull-out picture creation of spiral and circular reinforcement now works correctly. Previously it caused Tekla Structures to hang.

TTSD-23434 Tools and components

In Tekla Model Sharingcloud service for collaboration and for storing and sharing a model

Tekla Model Sharing is one of the Tekla online services.

models, using Organizer or some other .NET tools could previously cause errors at write out when using the Project viewer role. This has now been fixed.

TSAC-2612 Import, export, interoperability (concrete)

Export Unitechnik (79): It is now possible to export exposition classpart property that groups parts according to identifiers given by the user

The identifiers of classes are usually numbers. Classes can be used for defining the color of parts in the model, for example. Class does not influence the numbering of model objects.

using the new option Exposure class on the SLABDATE data block specification tab.

TSAC-2594 Import, export, interoperability (concrete)

Export EliPlan file (68): It is now possible to specify a selection filterfilter used for defining which object types can be selected

Selection filter chooses model objects according to object properties.

Selection filters can be standard or user-defined.

For example, selection filters can be used to select parts for drawings or analysis.

using the setting Export using filter. The parts are selected using the specified selection filter

TSAC-2610 Import, export, interoperability (concrete)

Export Unitechnik (79): Production thickness export for double walls has been changed. With the option Cast unit width the cast unit thickness is exported for both shells.

TSAC-2602 Tools and components

Design points imported from a point file did not have a correct shape according to the shape which was set in the Settings dialog box in Layout managertool that is used to import and export layout data between Tekla Structures and field layout devices

Layout manager enables the use of accurate model point and line data on the construction site.

. This has now been fixed.

TSAC-2277 Import, export, interoperability (concrete)

Export Unitechnik (79): You can now export the means of transportation information using the new option option Transport type on the SLABDATE block data specification tab.

TSAC-2597 Drawings

The dimensions arrows were positioned incorrectly when you were using the setting Visibility of reinforcing bars in group with the option two bars in the middle of group. This has now been fixed.

TSAC-2470 Import, export, interoperability (concrete)

Export Unitechnik (79): Previously, when double wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

shell was created from more than one part and Cut outer assemblies option was turned on, the embeds were missing from the export. This has now been fixed.

TSAC-2587 Steel components

In Bolted moment connection (134), Column with stiffeners W (182) and Column with stiffeners (188), the doubler platecomponent object that represents a structure that strengthens a steel beam web or steel column web by thickening it

cut for avoiding a clash with the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

(1) Main part can be an assembly main part or a cast unit main part.

(2) input part that the user selects first when creating a component

(2) Connections and details always have a component main part.

is now created correctly.

TTSD-22080 Analysis and design

In a Tekla Model Sharing modelmodel used for collaboration over the Tekla Model Sharing service

With a shared model, each user works with their own model and the changes are shared through Tekla Model Sharing. A shared model requires the use of a single-user model. The same model cannot be a shared model and a multi-user model.

, when you read in changes that included an analysis modelstructural model that is created from a physical model and used on the one hand for analyzing structural behavior and load bearing, and on the other hand for design

Analysis model can be viewed in Tekla Structures in a model view.

Analysis model that is made with Tekla Structures can be worked on in other analysis and design software or application.

, and an autosaved model was created after read in and the model then reopened without saving, the analysis model could sometimes be lost. This has now been fixed.

TSAC-2337 Import, export, interoperability (concrete)

BVBS Export: Now the exported circular and spiral rebars get the arc inner radius instead of the center-line radius.
This value is inquired from report property DIM_R, and calculated from the rebar geometry if the DIM_R is missing.

TTSD-22656 Analysis and design

Previously, when a user had created an analysis modelstructural model that is created from a physical model and used on the one hand for analyzing structural behavior and load bearing, and on the other hand for design

Analysis model can be viewed in Tekla Structures in a model view.

Analysis model that is made with Tekla Structures can be worked on in other analysis and design software or application.

in a multi-user modelmodel that is used for collaboration and that is opened in multi-user mode

and another user saved the model, this new analysis model was not visible for either user in the Analysis & Design Model dialog box. This has now been fixed.

TTSD-15992 Import, export, interoperability

In DWG export, there is now a new check to see if files can be written to before the export starts. You are also prompted to close the files. If an exported file already exists, a dialog box is displayed asking if you want to overwrite the existing files.

TTSD-12860 Tools and components

The contextual toolbarfloating toolbar that contains commands for modifying the most common object properties

The user can customize the contextual toolbar.

The term mini toolbar is used in Tekla Structures until version 21.1.

profiles are now fetched from external environment firm folders along with the users' local profile folder. These external profiles can be loaded in, but any changes will still be saved in the users' local folder as new profiles.

TTSD-20216 Import, export, interoperability

With the IFC2x3 export using the Coordination  and Steel Fabrication model viewview that is represented in the modeling mode

Model view is available also in the drawing mode and it is represented in its own window.

definition, the beams and columns that have a fittingadjustment of a part end

plane at both ends are shorter than in the model. The error does not occur when line cuts are used instead or only one fitting is used.  This has now been fixed.

TSAC-2319 Drawings

Rebar groupgroup of reinforcing bars that are side by side and have identical properties, except the possible variation in bar lengths

dimensioning
: The dimensions arrows were positioned incorrectly when you were using the setting Visibility of reinforcing bars in group with the option two bars in the middle of group in drawing reinforcement properties. This has now been fixed.

TTSD-21806 User interface

Previously, when you clicked a selection or snap switchswitch used for controlling what kind of points Tekla Structures snaps to

The user needs to activate snap switches to be able to pick different points, for example, line ends and intersections.

Snap switches help the user to pick points in order to position model objects precisely without having to know the coordinates or create additional lines or points.

button, and then clicked another selection or snap switch button, the button you had clicked first also stayed selected for some time. This happened when a firm or project folderfolder that is used for storing Tekla Structures-related files customized for a particular project

was mapped to a network drive and the network connection was slow. Now this has been fixed.

TTSD-22618 User interface

Previously, if you used ft (decimal) length units and selected a bolt groupgroup of bolts that forms a connecting building object between an assembly main part and secondary parts

The number of bolts in a bolt group depends on the bolt group shape and the values of bolt distances.

, the property panecontrol element in Tekla Structures user interface in the form of a side pane window

The property pane can be used to show and modify the properties of model objects.

could be empty. Also, if you changed the unit setting to use ft (decimal) while the property pane was open, Tekla Structures sometimes crashed. Now the property pane properly shows the properties of the bolts.

TSAC-1022 Concrete components

In Double wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

edge and opening reinforcement
, there is a new cover thickness offset C3 on the Picture tab. New options have been added for edge and opening reinforcement (not reinforcement and create just stirrups) on the Reinforcement and Opening tabs.

TTSD-19633 Organizer

In Organizertool that is used for categorizing and managing model information, object properties and object property queries, and model object classification

Organizer consists of two tools, object browser and categories.

, when you clicked  and moved the mouse over the Color set command, the command stayed highlighted even when you moved the mouse away from the command. This has now been fixed.

TSAC-2268 Tools and components

In Rebar shape managertool that is used for customizing the bending shapes of reinforcing bars

Rebar shape manager can be used for bending shapes only and not for any other reinforcing bar properties.

, it was not possible to include any of the ‘Leg to leg’ (D1:2), ‘Along leg’ (K3:1) nor ‘Off from leg’ (H3:1) distances in a rule formularule stated in a mathematical language

Formula is part of an equation.

. The formula value was not correctly evaluated and thus the rule result was never true and the OK button was not enabled. This has now been fixed.

TSAC-2390 Import, export, interoperability (concrete)

Export Unitechnik (79): Production thicknesses of double wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

shells are now calculated so that the 1st shell thickness reports sub-assemblyassembly in a nested assembly that is subordinate to a parent assembly

thickness including braced girders, and the 2nd shell reports complete cast unit thickness regardless of the chosen dialog box option.  This is to ensure that the production thickness values comply with the curing chamber slot maximum height.

TSAC-1710 Tools and components

Rebar Coupler and Anchor Tools: Previously, the assembly structure was broken when a coupler was created as a custom partcomponent for creating a part that cannot be created by using any existing part command or part profile

Typically, custom parts are used to create parts that have a complex composition. For example, castellated beams and sandwich panels are often created as custom parts.

and you attached the rebar to another part after the couplers were created.
Note that if the assembly hierarchyarrangement of assemblies that describes the manufacture and erecting of the actual assembly to be built

is already broken, you need to explodeto ungroup the objects that are parts of another object or a component

In Tekla Structures, it is possible to explode components, cast units, assemblies, bent plates, parts that have attached parts, and drawing shapes and plugins.

The exploded objects cannot be reverted back to the original group.

the cast unit, or remove the extra part from the cast unit, and update the coupler once to get the couplers added to the correct cast unit.

TSAC-2452 Steel components

In Rebar holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

, when Rounding type on the Parameters tab is set to Round by table and Hole type on the Advanced tab is set to Part cutcut that is defined by a cutting part

or Bolt hole + part cut, if the maximum rebar diameter value in the table is smaller than the rebar diameter defined in the rebar properties, Tekla Structures displayes a warning message: Rebar diameter from table is smaller than the rebar diameter from model.

TTSD-17887 Modeling

If you need to reset pour unitentity that combines together a pour object and the other building objects that need to be in place before cast-in-place concrete can be poured

The needed building objects can be reinforcement and embeds, for example.

contents and relations defined using the Calculate pour units command and/or the Add to pour unit command, you can now use the following commands in Quick Launchtool that is used for quickly finding commands, dialog boxes, and other functions in Tekla Structures

The other functions include local content from Tekla Warehouse, for example.

:

  • Reset all pour unit relations
  • Reset all manually assigned pour unit relations
  • Reset all pour unit relations except manual assignments

The first two commands have a dialog box where you confirm the command. This is because you cannot undo the commands.