2018 SP11: New features and improvements
2018
Tekla Structures
Fixes
Defect number | Development area | Description |
---|---|---|
TSAC-3556 | Concrete components | Embedded anchors (8): Previously, only concrete parts have been taken into calculations when using the Assembly without steel parts option on the Placement tab. This has now been fixed and miscellaneous parts are also considered. |
TSAC-2363 | Steel components | Cold rolled overlap (1): Previously, the default position for bolts did not work correctly and the bolt group was not created centered on the profile. This has now been fixed. |
TSAC-3436 | Steel components | Purlin 1 (61): Previously, the bolts did not bolt all input parts in some situations. This has now been fixed. |
TSAC-3713 | Steel components | Central brace tube conn Pl (50): Previously, there was a gap between the connection plate and gusset plate when using the component to connect only one secondary part. This has now been fixed. |
TSAC-3744 | Steel components | Column - 2 beam (14): Previously, the plate between the column and beams was created incorrectly when the bolt offset from the plate center line was specified. This has now been fixed. |
TSAC-3829 | Steel components | Two sided clip angle (143): Previously, when the bolt dimensions on the BoxPBolts tab were smaller than the bolt dimensions on the BoxSBolts tab, the angle boxes were created incorrectly. This has now been fixed. |
TSAC-3925 | Steel components | Stairs (S71): Previously, the error message "Illegal input" was shown even when the component was created correctly. This has now been fixed. |
TSAC-3967 | Steel components | Stair base detail (1038): Previously, all welds in the component were created twice in the same place. This has now been fixed. |
TSAC-4011 | Steel components | Splice connection (77): Welds between the deck plates and input parts now have the correct direction. |
TTSD-33697 | Import, export, interoperability | Trimble Connector: You can now upload the same .skp reference model to Trimble Connect with a different name. |
TTSD-34022 | Import, export, interoperability | Tekla Structures now supports Sketchup version 2020. |
TTSD-34274 | Import, export, interoperability | Drawing DWG export is now more robust with symbol handling. |
TTSD-34865 | Import, export, interoperability | IFC object conversion: All parametric C profile start and end points have now been switched. Earlier, they were incorrectly oriented after being converted to Tekla Structures parts. |
TTSD-34954 | Import, export, interoperability | IFC2x3 export: The export sometimes used incorrect object colors when exporting using representation. This has now been fixed. |
TTSD-33080 | Templates and reports | Template Editor: The CopyField() function now works correctly when used with multilevel hidden rows |
TTSD-33291 | Templates and reports | Reports are now created a lot faster than before. |
TTSD-33313 | Templates and reports | Template Editor: When a geometry object was edited in a template that also contained a picture object, the performance was poor, and the more you zoomed in, the worse the performance became. This has now been fixed. |
TTSD-34112 | Templates and reports | Now when you resize a component by dragging the upper or lower handle, all object positions remain the same relative to the opposite side of the dragged handle. So if the top handle is dragged, the object remains in the same position relative to the bottom of the component. |
TTSD-34611 | Templates and reports | In Template Editor, the Reset button was missing from the Picture Properties dialog box. This has now been fixed. |
TTSD-28502 | Drawings | Adding surface treatment marks manually now works more reliably. |
TTSD-33642 | Drawings | Adding revisions to drawings with tables that contain the NUMBER attribute now works correctly. |
TTSD-33730 | Drawings | UDAs were not loaded to the drawing properties dialog boxes if the User-defined attributes section in the properties dialog box had not been opened first. This has now been fixed. |
TTSD-33788, TTSD-33790 | Drawings | Manually created detail marks can now be: - moved using Shift+drag - copied using Ctrl+drag Note that the detail marks can only be moved or copied within a view. When moved beyond the view frame, the view frame will adjust so that the detail mark will always be within it. |
TTSD-34370 | Drawings | When dimensioning type Overall was used in section views, Tekla Structures created duplicate views with same section mark. Now this has been fixed and there is only one A-A view visible, for example. |
TTSD-34381 | Drawings | Tekla Structures occasionally crashed when drawing bolt dimensions. This has now been fixed. |
TTSD-34521 | Drawings | The Undo command now works more reliably for curved dimensions. |
TTSD-34609 | Drawings | Manually created section marks can now be: • moved using Shift+drag • copied using Ctrl+drag Note that the section marks can only be moved or copied within a view. When moved beyond the view frame, the view frame will adjust so that the section mark will always be within the frame. |
TTSD-39590 | Drawings | Detailed object level settings now automatically update the drawing after a part has its attributes or phase changed. Previously, detailed object level settings were only updated after a part was created, modified or numbered. |
TTSD-42726 | Drawings | Tekla Structures application error no longer occurs when you inquire a rebar set in a drawing. |
TTSD-30977 | Tekla Model Sharing | In Tekla Model Sharing, importing or exporting parametric user-defined profiles in the .lis format is no longer possible without a subtype. This will prevent creating broken or incorrect files. |
TTSD-32744 | Tekla Model Sharing | Previously, changes made in the rebar catalog were not included in write-out packets, if the changed rebars were only used in rebar sets in the shared model. This has now been fixed, so that all rebar catalog changes are included in write-out packets. |
TTSD-34133 | Tekla Model Sharing | When a shared model is read in, and Tekla Structures sets the rebar numbering in drawings as not up to date because of numbering conflicts, the part numbering and the cast unit numbering are now also set as not up to date. |
TTSD-35246 | Tekla Model Sharing | Previously, when you modified drawing properties in a shared model, the changes list could sometimes be disabled. This has now been fixed. |
TTSD-13154 | Reinforcement | The visualization of curved and circular reinforcing bars containing hooks has been improved where previously the hook bending was not correctly represented. |
TTSD-29779 | Modeling | Previously, option type UDAs could only have 50 options in the list of options. This issue appeared when using the side pane, Organizer, or in the Open API. Now option type UDAs can have 400 options. |
TTSD-32798 | Modeling | When you selected assembly objects using the ALT key and the assembly contained a macro, inquiring the center of gravity caused Tekla Structures to crash. This does not happen anymore. |
TTSD-33341 | Modeling | Previously, setting the work plane could in some cases cause small deviations in the accuracy of work plane coordinates. This has now been fixed. |
TTSD-34291 | Modeling | The notifications.xml file is now again saved in the <user>\AppData\Local\ folder. |
TTSD-34345 | Modeling | Previously, Tekla Structures could crash in some cases related to polygon welds. This has now been fixed. |
TSAC-4023 | Import, export, interoperability (concrete) | Export Unitechnik (79): Now, when there are multiple wire sizes in the same layer for the same direction of wires in the STEELMAT block, they are exported with the same concrete cover (the same Z coordinate offset). |
TSAC-4024 | Import, export, interoperability (concrete) | Export Unitechnik (79): Previously, some meshes, on a slightly inclined plane compared to pallet plane, were not correctly rotated to the pallet plane with option Meshes export: Turned to pallet. This has now been fixed. |