Extensions

Kingspan Apex Ties (9)

The Kingspan Apex Ties macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define various types of ties between the two Multibeams at an apex. 
by Trimble Solutions UK
0

Kingspan Apex Ties (9) - Parameters tab

Use the Parameters tab in the Kingspan Apex Ties Properties panel to control how the connecting members are defined within Tekla Structures.  
by Trimble Solutions UK
0

Kingspan Apex Ties (9) - Parts tab

Use the Parts tab in the Kingspan Apex Ties Properties panel to control the member properties of the items created by the macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Kingspan Autoform Detail (3)

The Kingspan Autoform Detail joint only works with Kingspan Multichannel sections and is used to create an autoform at the end of a Multichannel. 
by Trimble Solutions UK
0

Kingspan Autoform Detail (3) - Bolts tab

Use the Bolts tab in the Kingspan Autoform Detail Properties panel to override the default bolt data.  
by Trimble Solutions UK
0

Kingspan Autoform Detail (3) - Parameters tab

Use the Parameters tab in the Kingspan Autoform Detail Properties panel to control how the autoform is defined within Tekla Structures.  
by Trimble Solutions UK
0

Kingspan Autoform One Sided (20)

The Kingspan Autoform One Sided connection is used to connect a Multichannel (compound or single) to a main member. 
by Trimble Solutions UK
0

Kingspan Autoform One Sided (20) - Bolts tab

Use the Bolts tab in the Kingspan Autoform One Sided Properties panel to override the default bolt data.  
by Trimble Solutions UK
0

Kingspan Autoform One Sided (20) - Parameters tab

Use the Parameters tab in the Kingspan Autoform One Sided Properties panel to control how the autoform is defined within Tekla Structures.  
by Trimble Solutions UK
0

Kingspan Autoform One Sided (20) - Parts tab

Use the Parts tab in the Kingspan Autoform One Sided Properties panel to control the member properties of the items created by the joint.  
by Trimble Solutions UK
0

Kingspan Autoform Two Sided (22)

The Kingspan Autoform Two Sided connection is used to connect two Multichannels (compound or single) to a main member. 
by Trimble Solutions UK
0

Kingspan Autoform Two Sided (22) - Bolts tab

Use the Bolts tab in the Kingspan Autoform Two Sided Properties panel to override the default bolt data.  
by Trimble Solutions UK
0

Kingspan Autoform Two Sided (22) - Parameters tab

Use the Parameters tab in the Kingspan Autoform Two Sided Properties panel to control how the autoform is defined within Tekla Structures.  
by Trimble Solutions UK
0

Kingspan Cleader Angle (13)

The Kingspan Cleader Angle connection is used to create a bolted connection between a manually modelled cleader angle and the top or outer flange of a Multibeam/Multichannel section. 
by Trimble Solutions UK
0

Kingspan Cleader Angle (13) - Parameters tab

Use the Parameters tab in the Kingspan Cleader Angle Properties panel to control how the bolt is defined within Tekla Structures.  
by Trimble Solutions UK
0

Kingspan cold rolled - Important information

When utilising the Kingspan cold rolled system it is important to take the following information into account.
by Trimble Solutions UK
0

Kingspan Cold Rolled Sleeved (28)

The Kingspan Cold Rolled Sleeved connection is used to connect one or two purlins/rails to a rafter/stanchion. It can be used for sleeved joints, butt joints, in the middle of double span purlins/rails, and at gable ends. It should not be used for connections to hip rafters for which a separate joint is available. For simplicity, this help text, and the joint dialogue, will refer only to purlins and rafters, but unless explicitly stated otherwise, these terms should be taken to mean purlins/rails and rafters/stanchions.
by Trimble Solutions UK
0

Kingspan Cold Rolled Sleeved (28) - FireWall tab

Use the Parameters tab in the Kingspan Cold Rolled Sleeved Properties panel to control how the FireWall sleeve is defined within Tekla Structures.
by Trimble Solutions UK
0

Kingspan Cold Rolled Sleeved (28) - Parameters tab

Use the Parameters tab in the Kingspan Cold Rolled Sleeved Properties panel to control how the sleeve is defined within Tekla Structures.  
by Trimble Solutions UK
0

Kingspan Cold Rolled Sleeved (28) - Parts tab

Use the Parts tab in the Kingspan Cold Rolled Sleeved Properties panel to control the member properties of the items created by the joint.  
by Trimble Solutions UK
0

Pages

.