Extensions

Ayrshire Eaves Beam to Stanchion (113)

The Ayrshire Eaves Beam to Stanchion connection will define a fixing bracket according to the set of parameters specified with either standard or non-standard stooling dimensions. The joint will define all bolts and welds required, and where appropriate will also fit the ends of the eaves beams to leave the correct end gapany space between two objectsThe term gap is used in its general sense in Tekla Structures.. 
by Trimble Solutions UK
0

Ayrshire Eaves Ties (68)

The Ayrshire Eaves Ties macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define an eaves tie individually between an eaves beam and purlin/rail.
by Trimble Solutions UK
0

Ayrshire File Transfer (92)

The Ayrshire File Transfer macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. will create a transfer file compatible with the Ayrshire detailing program.
by Trimble Solutions UK
0

Ayrshire Gable Post Shear Plate (105)

The Ayrshire Gable Post Shear Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. is provided as a connection between a C-section or compound C-section column and a gable rafter. However, it may be applied to similar situations.
by Trimble Solutions UK
0

Ayrshire Non-Continuous Rail (106)

The Ayrshire Non-Continuous Rail System joint is normally used when the specified column face to cladding distance is less than that possible for the standard purlin/rail joint. The joint can handle flush or recessed sheeting lines. A non-standard cleat, (either angle or tee), is welded to the column, and bolted to the rail using holes along the standard gauge lines.
by Trimble Solutions UK
0

Ayrshire Non-Standard Anti-Sag (67)

The Ayrshire Non-Standard Anti-Sag macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Ayrshire Non-Standard Side Rail (70)

The Ayrshire Non-Standard Side Rail macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Ayrshire Shear Plate to Hip (8)

The Ayrshire Shear Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. to Hip connection is used to create the appropriate items to connect one or two purlins to a hip rafter.
by Trimble Solutions UK
0

Ayrshire Side Rail Supports (90)

The Ayrshire Side Rail Supports macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Ayrshire Simple Hip (14)

The Ayrshire Simple Hip connection is provided to form a connection between a single cold rolled purlin and a hip or valley rafter. 
by Trimble Solutions UK
0

Ayrshire Standard Anti-Sag Bay (89)

The Ayrshire Standard Anti-Sag Bay macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Albion Apex Ties (66)

The Albion Apex Ties macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define various types of ties between the two purlins of an apex.
by Trimble Solutions UK
0

Albion Cladding Joint Rail (59)

The Albion Cladding Joint Rail macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Albion Cladding Joint Rail Column (60)

The Albion Cladding Joint Rail Column macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Albion cold rolled - Important information

When utilising the Albion cold rolled system it is important to take the following information into account.
by Trimble Solutions UK
0

Albion Cold Rolled Cleat (110)

The Albion Cold Rolled Cleat joint connects between various combinations of compatible ‘I’, ‘Z’ and ‘C’ sections. It is possible to specify any angle profile for the cleat, this allows it to be tailored to design requirements. 
by Trimble Solutions UK
0

Albion Cold Rolled Sleeved (118)

The Albion Cold Rolled Sleeved connection is used to connect one or two purlins/rails to a rafter/stanchion. It can be used for sleeved joints, butt joints, in the middle of double span purlins/rails, and at gable ends. It should not be used for connections to hip rafters for which a separate joint is available. For simplicity, this help text, and the joint dialogue, will refer only to purlins and rafters, but unless explicitly stated otherwise, these terms should be taken to mean purlins/rails and rafters/stanchions.
by Trimble Solutions UK
0

Albion Diagonal Ties (65)

The Albion Diagonal Ties macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Albion Eaves Beam to Stanchion (104)

The Albion Eaves Beam to Stanchion connection will define a fixing bracket according to the set of parameters specified with either standard or non-standard stooling dimensions. The joint will define all bolts and welds required, and where appropriate will also fit the ends of the eaves beams to leave the correct end gapany space between two objectsThe term gap is used in its general sense in Tekla Structures.. 
by Trimble Solutions UK
0

Albion Eaves Brace (64)

The Albion Eaves Brace macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define an eaves brace individually between an eaves beam.
by Trimble Solutions UK
0

Pages

.