Extensions
Kingspan Diagonal Ties (15)
The Kingspan Diagonal Ties macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. allows the placing of single or double diagonal ties.
September 3, 2020
by Trimble Solutions UK
CMF Anti-Sag System (53)
The CMF Anti-Sag System macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
September 3, 2020
by Trimble Solutions UK
CMF Apex Tie Bay (12)
The CMF Apex Tie Bay macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define multiple ties within a bay, between the two purlins at an apex.
September 3, 2020
by Trimble Solutions UK
CMF Apex Ties (9)
The CMF Apex Ties macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define various types of ties between the two purlins of an apex.
September 3, 2020
by Trimble Solutions UK
CMF cold rolled - Important information
When utilising the CMF cold rolled system it is important to take the following information into account.
September 3, 2020
by Trimble Solutions UK
CMF Cold Rolled Sleeved (120)
The CMF Cold Rolled Sleeved connection is used to connect one or two purlins/rails to a rafter/stanchion. It can be used for sleeved joints, butt joints, in the middle of double span purlins/rails, and at gable ends. It should not be used for connections to hip rafters for which a separate joint is available.
For simplicity, this help text, and the joint dialogue, will refer only to purlins and rafters, but unless explicitly stated otherwise, these terms should be taken to mean purlins/rails and rafters/stanchions.
September 3, 2020
by Trimble Solutions UK
CMF Diagonal Ties (55)
The CMF Diagonal Ties macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. allows the placing of single or double diagonal ties.
September 3, 2020
by Trimble Solutions UK
CMF Eaves Beam to Stanchion (27)
The CMF Eaves Beam to Stanchion connection is used to create a bolted or welded connection between the eave beam and column/stanchion.
September 3, 2020
by Trimble Solutions UK
CMF Eaves Brace (54)
The CMF Eaves Brace macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define an eaves brace individually between an eaves beam.
September 3, 2020
by Trimble Solutions UK
CMF Horizontal Cladding Support Column (33)
The CMF Horizontal Cladding Support Column macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
September 3, 2020
by Trimble Solutions UK
CMF Non-Continuous Rail (106)
The CMF Non-Continuous Rail system joint is normally used when the specified column face to cladding distance is less than that possible for the standard purlin/rail joint. The joint can handle flush or recessed sheeting lines. A non-standard cleat, is bolted to the column, and bolted to the rail along the standard gauge lines.
September 3, 2020
by Trimble Solutions UK
CMF Non-Standard Anti-Sag (57)
The CMF Non-Standard Anti-Sag macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
September 3, 2020
by Trimble Solutions UK
CMF Non-Standard Horizontal Cladding Support (34)
The CMF Non-Standard Horizontal Cladding Support macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
September 3, 2020
by Trimble Solutions UK
CMF Non-Standard Side Rail (52)
The CMF Non-Standard Side Rail support macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define individual supports between selected side rails.
September 3, 2020
by Trimble Solutions UK
CMF Shear Plate to Hip (8)
The CMF Shear Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. to Hip connection is used to create the appropriate items to connect one or two purlins to a hip rafter.
September 3, 2020
by Trimble Solutions UK
CMF Side Rail Supports (28)
The CMF Side Rail Supports macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define an arrangement of side rail supports between the rails of a bay.
September 3, 2020
by Trimble Solutions UK
CMF Simple Hip (14)
The CMF Simple Hip connection is provided to form a connection between a single cold rolled purlin and a hip or valley rafter.
September 3, 2020
by Trimble Solutions UK
CMF Standard Horizontal Cladding Support (31)
The CMF Standard Horizontal Cladding Support macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
September 3, 2020
by Trimble Solutions UK
CMF Window Trimmer Rail (37)
The CMF Window Trimmer Rail macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define an individual channel section between selected side rails.
September 3, 2020
by Trimble Solutions UK
BW Apex Ties (56)
The BW Industries' Apex Ties macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define various types of ties between the two purlins of an apex.
September 2, 2020
by Trimble Solutions UK
Pages
.