Extensions

Transition Duct

The Duct and Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. Work tool allows user to create the rectangular and trapezoidal duct with 4 plates of same or different material and finish.
by Developer TIN
0
  • Duct
  • Transition duct
  • straight duct
  • bin

Unfolded bent plate drawing

Contents   Purpose and descriptionSystem RequirementsInstalling Unfolded bent plate drawingUsing Unfolded bent plate drawingApplication properties and buttonsAdditional information 
by Steel Extensions
3

Unfolded bent plate drawing

Contents   Purpose and descriptionSystem RequirementsInstalling Unfolded bent plate drawingUsing Unfolded bent plate drawingApplication properties and buttonsAdditional information 
by Steel Extensions
0

Auto Component Fittings

Creating fittingadjustment of a part end connection between Built-up members (Beam to Column or Beam to Beam)
by Tekla Extensions Global
0
  • Built Up Auto Fittings
  • Component Fittings
  • Auto Component fittings
  • fittings

Component Fittings

The built-up fittingadjustment of a part end, built-up fitting details & built-up fitting plane plug-ins allows user to create the fitting between built up beam and column, a fitting detail for built up column and fitting built up to a plane.
by Tekla Extensions Global
0
  • Component Fitting

Level Distance for Tower Dimension

The Drawing Express Tool – Create Level Distance for Tower Dimension allows user to get the level distances for towers.
by Developer TIN
0

Similar Assemblies Filter

The Drawing Express Tool – Helps to group similar assemblies based on predefined conditions.
by Developer TIN
0

Built-up Box Column

The 'Built-up Box Beam' plug-in allows user to create the built up box column from plates / sections.
by Tekla Extensions Global
0
  • Built Up Box Beam

Built-up I Column

The 'Built-up I Column' plug-in allows user to create the built up I column from plates / sections.
by Tekla Extensions Global
0
  • Built Up I-Beam

Built-up Box Beam

The 'Built-up Box Beam' plug-in allows user to create the built up box beam from plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. / sections.
by Tekla Extensions Global
0
  • Built Up Box Beam

Built-up I Beam

The 'Built-up I Beam' plug-in allows user to create the built up I beam from plates / sections.
by Tekla Extensions Global
0
  • Built Up I-Beam

Built-up Star Column

The 'Built-up Star Column' plug-in allows user to create the star column from plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. / sections.
by Tekla Extensions Global
0
  • Star Column

Built-up Angles

The Built-up Angles plug-in allows user to create the built up angle beam along with spacer plates.
by Tekla Extensions Global
0
  • Built Up Angles

Built-up Section Name Settings

This tool is to configure the Built-up Sections designation. This designation is written into the assembly of the built-up section which is created by built-up plugins in the same toolbar. The attribute name is “BuiltUpName” and this value retrieved by GetValue(“BuiltUpName”) call.
by Tekla Extensions Global
0
  • Built-up Section Name Settings

Offset generation

Contents   Purpose and descriptionSystem RequirementsInstalling Offset generationUsing Offset generationPictureExample Purpose and description Use Offset generation to create offset clearances easily for purposes of avoiding/preventing part clashes and perform weld work.
by Steel Extensions
0

Overlapping part in multi drawings

Contents   Purpose and descriptionSystem RequirementsInstalling Overlapping part in multi drawingsUsing Overlapping part in multi drawingsApplication propertiesApplication button 
by Steel Extensions
0

Overlapping part in multi drawings

Contents   Purpose and descriptionSystem RequirementsInstalling Overlapping part in multi drawingsUsing Overlapping part in multi drawingsApplication propertiesApplication button 
by Steel Extensions
0

Single Part View handling

Assembly drawingdrawing that shows fabrication information for a basic or a nested assembly, including bolts and welds, and that is generally used at the workshopAssembly drawings show how parts are located in an assembly. They contain the parts of the assembly presented in one or more views. with single parts when linked in Multidrawings , single part views get duplicated if they are available in more than one assembly drawing , user has to manually find and delete them.
by Developer TIN
0
  • single part view handling
  • single part view
  • single part views
  • view deleting

Single Part View handling

Assembly drawingdrawing that shows fabrication information for a basic or a nested assembly, including bolts and welds, and that is generally used at the workshopAssembly drawings show how parts are located in an assembly. They contain the parts of the assembly presented in one or more views. with single parts when linked in Multidrawings , single part views get duplicated if they are available in more than one assembly drawing , user has to manually find and delete them.
by Developer TIN
0
  • single part view handling
  • single part view
  • single part views
  • view deleting

Anchor Rods

The Anchor rods allows user to create the anchor rods for any base platecomponent object that represents a plate welded to a column baseBase plates are used to distribute the concentrated load of the column over a wider area. with bolts.
by Developer TIN
0
  • anchor rods
  • anchors
  • baseplate anchors
  • base plate anchor
  • anchor rod
  • anchor

Pages

.