Extensions

Virtual tour

Contents   Purpose and descriptionSystem RequirementsInstalling Virtual tourUsing Virtual tourApplication properties and buttonsAdditional information 
by Steel Extensions
0

Show components between parts

Contents   Purpose and descriptionSystem RequirementsInstalling Show components between partsUsing Show components between partsApplication properties 
by Steel Extensions
0

Leg bent plate

Contents   Purpose and descriptionSystem RequirementsInstalling Leg bent plateUsing Leg bent platePart identification keyPicture
by Steel Extensions
0
by Trimble Solutions India
2
  • Fix id gaps
  • Model backup
  • Model Diagnose
  • model dump
  • model maintenance
  • Model repair

Form Face Creator

Purpose and description
by CIP extensions
0

Packaging Tool

Contents Purpose and descriptionSystem RequirementsInstalling Packaging ToolUsing Packaging ToolAdditional information
by Steel Extensions
0

Neutral File Import/Export

Neutral File Import/Export Extensions These import/export extensions integrate Tekla Structures with CSC's Fastrak Building Designer and Orion design software. The Fastrak links allow round tripping of information between Tekla Structures and Fastrak Building Designer.
by Tekla Structures Extensions UK
0

Hollow Core Checker

1. Purpose and description Hollow Core Checker is an addition to Tekla Structures extension Model Checker Suite.
by Precast Extensions
0

Truss Cambering Tool

Contents Purpose and descriptionSystem RequirementsInstallationUsageTruss Cambering Tool settingsAdditional information
by Steel Extensions
0

Truss Camber Diagram

Contents Purpose and descriptionSystem RequirementsInstallationUsing the extensionTruss Camber Diagram settingsAdditional information
by Steel Extensions
0

Area Reinforcement

The Area Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. automatizes the process of reinforcing walls and slabs. Itcreates custom rebar meshes that cover the faces with bigger area of the part.These custom meshes may have different distances between bars and also bars of different sizes.
by Precast Extensions
4
  • Area Reinforcement

Sharing Automation Tool

Purpose and descriptionSystem RequirementsInstalling Sharing Automation ToolUsing Sharing Automation Tool Purpose and description Tool reads in and tries to write out until it succeeds. Tool enables scheduled read in that providespossibility to have other user’s changes available when coming to office in the morning.
by Tekla Extensions - General Design
0

I-Beam Reinforcement

The I-Beam Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. can be used to easily reinforce an I-Beam with bend meshes in top and bottom flange, stem meshes, u-bars in top flange and longitudinal bars along the beam. An example of a beam can be seen below.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Attributes tab

Use Attributes tab to define attributes for meshes and u-bars.The grade and bending radius fields are grayed out and filled automatically through the other tab pages.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: U bars tab

Use the U bars tab to define the U bars properties.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Bottom flange tab

Use the Bottom flange tab to define the meshes in the bottom flange of the I-Beam. Same as TopThe user can define if all the settings on this page are identical with the Top flange tab.If this option is set to Yes, all fields on this tap page will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Top flange tab

Use the Top flange tab to define the meshes in the top flange of the I-Beam. SymmetricThe user can define if the zones will be symmetrical or not.If the user selects symmetrical = Yes, then the zone 1 = zone 5 and zone 2 = zone 4.Zone 4 and zone 5 will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Stem mesh tab

Use the Stem meshreinforcement that represents a mesh of steel bars in two perpendicular directionsIn Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars. tab to define meshes in the I-Beam stem.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Picture tab

Use the Picture tab to define types of reinforcing bars and their cover thickness from the IBeam front viewdefault view that is created using the part’s or component’s coordinate system and that shows the part or component from the front directionPart’s front view is a view on part plane created of the part’s front plane..
by Precast Extensions
0
  • I-Beam Reinforcement

Area Reinforcement: Crossing bars tab

Use the Crossing bars tab to set prefered and minimal spacing between the normal crossing bars and to set the gridmodeling aid that represents a three-dimensional complex of intersecting grid planes or intersecting grid planes and curved grid surfacesThe grid is defined by coordinates in 3D space. It is shown two-dimensionally on the view plane by dash-and-dot lines. A grid can be rectangular or radial.It is possible to have more than one grid in a model.
by Precast Extensions
0
  • Area Reinforcement

Pages

.