Extensions

Similar Assemblies Filter

The Drawing Express Tool – Helps to group similar assemblies based on predefined conditions.
by Developer TIN
0
  • Similar assembly filter
  • similar assembly
  • similar assemblies
  • assembly filter

Level Distance for Tower Dimension

The Drawing Express Tool – Create Level Distance for Tower Dimension allows user to get the level distances for towers.How to Locate ‘Drawing Express Tool – Create Level Distance for Tower Dimension’ plug-in will be available in toolbar. You may click the Create Level Distance for Tower Dimension toolbar with   icon from toolbar menu. On double click you will get the Level Distance for Tower Dimension dialog box.
by Developer TIN
0

Continuous Beam Reinforcement

Continuous Beam Reinforcement The ContinuousBeamReinforcement plug-in allows user to create the reinforcement cage for Continuous Beam of varying depth as per IS13920.
by Developer TIN
0
by CIP extensions
2
  • rebar
  • coupler
  • anchor
  • pull-out
  • pullout
  • custom presentation
  • Templates

Qr code

Content Purpose and descriptionSystem requirementsInstalling QrCodeUsing QrCodeSetting the content of  QrCodesetting the size of QrCodePurpose and description This extension allows you to create Qr codes in drawings and reports.
by Trimble Solutions France
0
  • Qr code
  • Qr codes
  • Qrcode
  • Qrcodes

Packaging Tool

Contents Purpose and descriptionSystem RequirementsInstalling Packaging ToolUsing Packaging ToolAdditional information
by Steel Extensions
0

Truss Camber Diagram

Contents Purpose and descriptionSystem RequirementsInstallationUsing the extensionTruss Camber Diagram settingsAdditional information
by Steel Extensions
0

Truss Cambering Tool

Contents Purpose and descriptionSystem RequirementsInstallationUsageTruss Cambering Tool settingsAdditional information
by Steel Extensions
0

Offshore Ring Plate

Contents Purpose and descriptionSystem RequirementsInstalling the Offshore Ring Plate extensionUsing the Offshore Ring Plate extensionOffshore Ring Plate propertiesAdditional informationLimitations on Split PlatesTrouble Shooting
by Steel Extensions
0

BCF Comment Tool

This is the new version of the Comment Tool. The BCF Comment Tool supports the final version of the BCF 2.0 standard to enable full collaboration between disciplines.
by Tekla Extensions - General Design
4

Comment Tool

Contents Purpose and description System requirements Installation and launch Basic Usage Sharing Comments Create Comments in Multi User Mode Sharing comments between Tekla BIMsight and Tekla Structures Create Comments in two Tekla Structures Models, one Native, one IFC Reference
by Tekla Extensions - General Design
0

Chair Bars

This plug-in allows to create chair bars in selected slabs. It arranges chair bars in X and Y direction with desired spacing, bars will be removed at all openings and user can also select parts or polygons to remove the chair bars.
by Developer TIN
5
  • Chair bars
  • chairbars
  • cover blocks
  • coverblocks
  • chair bar
  • Slab reinforcement
by Area Finland Service
5
  • Tekla
  • Civil
  • integration
  • Surfaces
  • import
  • export

Lifting Lug and Lifting Lug Manager

Contents Purpose and descriptionSystem RequirementsInstalling the extensionUsing the extensionAdditional information Purpose and description In certain countries Health and Safety regulations do not allow steel erectors to lift steelwork using chains or straps wrapped around members. Instead it is necessary to provide a positively connected lifting eye or lug.
by Steel Extensions
2.57143

Leg bent plate

Contents   Purpose and descriptionSystem RequirementsInstalling Leg bent plateUsing Leg bent platePart identification keyPicture
by Steel Extensions
0

Arm vertical brace

Contents   Purpose and descriptionSystem RequirementsInstalling Arm vertical braceUsing Arm vertical bracePart identification keyPictureParts  Purpose and description Use Arm vertical brace component to create vertical braces between the top and the bottom legs of truss.
by Steel Extensions
0

Arm diagonal brace

Contents   Purpose and descriptionSystem RequirementsInstalling Arm diagonal braceUsing Arm diagonal bracePart identification keyPictureParts 
by Steel Extensions
0

Built-up Section Name Settings

This tool is to configure the Built-up Sections designation. This designation is written into the assembly of the built-up section which is created by built-up plugins in the same toolbar. The attribute name is “BuiltUpName” and this value retrieved by GetValue(“BuiltUpName”) call.
by Tekla Extensions Global
0
  • Built-up Section Name Settings

Multi Depth Stiffener

The Multi Depth Stiffenercomponent object that represents a structure that strengthens a steel beam or columnStiffeners are usually plates.Stiffeners are used to prevent web buckling at supports or concentrated loads. plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog.
by Tekla Extensions Global
0
  • Multi Depth stiffener
  • stiffener
  • PEB
  • Pre Engineered Buildings
  • PEB stiffener
  • Plate Stiffener
  • PEB Connections
  • PEB Components

Multi Depth Stiffener

The Multi Depth Stiffenercomponent object that represents a structure that strengthens a steel beam or columnStiffeners are usually plates.Stiffeners are used to prevent web buckling at supports or concentrated loads. plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog.
by Tekla Extensions Global
0
  • Multi Depth stiffener
  • stiffener
  • PEB
  • Pre Engineered Buildings
  • PEB stiffener
  • Plate Stiffener
  • PEB Connections
  • PEB Components

Pages

.