Extensions

Built-up Section Name Settings

This tool is to configure the Built-up Sections designation. This designation is written into the assembly of the built-up section which is created by built-up plugins in the same toolbar. The attribute name is “BuiltUpName” and this value retrieved by GetValue(“BuiltUpName”) call.
by Tekla Extensions Global
0
  • Built-up Section Name Settings

Offset generation

Contents   Purpose and descriptionSystem RequirementsInstalling Offset generationUsing Offset generationPictureExample Purpose and description Use Offset generation to create offset clearances easily for purposes of avoiding/preventing part clashes and perform weld work.
by Steel Extensions
0

Overlapping part in multi drawings

Contents   Purpose and descriptionSystem RequirementsInstalling Overlapping part in multi drawingsUsing Overlapping part in multi drawingsApplication propertiesApplication button 
by Steel Extensions
0

Overlapping part in multi drawings

Contents   Purpose and descriptionSystem RequirementsInstalling Overlapping part in multi drawingsUsing Overlapping part in multi drawingsApplication propertiesApplication button 
by Steel Extensions
0

Single Part View handling

Assembly drawingdrawing that shows fabrication information for a basic or a nested assembly, including bolts and welds, and that is generally used at the workshopAssembly drawings show how parts are located in an assembly. They contain the parts of the assembly presented in one or more views. with single parts when linked in Multidrawings , single part views get duplicated if they are available in more than one assembly drawing , user has to manually find and delete them.
by Developer TIN
0
  • single part view handling
  • single part view
  • single part views
  • view deleting

Single Part View handling

Assembly drawingdrawing that shows fabrication information for a basic or a nested assembly, including bolts and welds, and that is generally used at the workshopAssembly drawings show how parts are located in an assembly. They contain the parts of the assembly presented in one or more views. with single parts when linked in Multidrawings , single part views get duplicated if they are available in more than one assembly drawing , user has to manually find and delete them.
by Developer TIN
0
  • single part view handling
  • single part view
  • single part views
  • view deleting

Anchor Rods

The Anchor rods allows user to create the anchor rods for any base platecomponent object that represents a plate welded to a column baseBase plates are used to distribute the concentrated load of the column over a wider area. with bolts.
by Developer TIN
0
  • anchor rods
  • anchors
  • baseplate anchors
  • base plate anchor
  • anchor rod
  • anchor

Anchor Rods

The Anchor rods allows user to create the anchor rods for any base platecomponent object that represents a plate welded to a column baseBase plates are used to distribute the concentrated load of the column over a wider area. with bolts.
by Developer TIN
0
  • anchor rods
  • anchors
  • baseplate anchors
  • base plate anchor
  • anchor rod
  • anchor

Rebar Polar Array

This tool allow user to select any member(steel, concrete, rebar) and copy rotate in circular manner. 
by Developer TIN
0
  • Array
  • Bolt Array
  • Polar
  • radial
  • Rebar Array
  • Rebar polar Array

PEB Anti-Sag Roof and Wall

PEB Anti-Sag  Roof and Wall allows user to create anti-sag members for either roof or wallplate that represents a structure such as a wall or roof panelIn Tekla Structures, a panel is created by picking two or more points.In cast-in-place concrete the term wall refers to a concept similar to panel. purlins.
by Tekla Extensions Global
0
  • Sag Rod
  • Anti sag
  • Anti-sag
  • Apex
  • Anti sag wall
  • Anti-sag wall
  • Bend sag rod
  • Anti sag roof
  • Anti-sag roof

Rebar Tick Tag

Rebar Tick Tag tool creates tags for selected rebar of all shape including curved bars in drawings.How to locate Installers are available at Rebar Tick Tag for Tekla Structures version 2016.After installation below icon will be available in Applications & components . Usage Input for this extension
by Developer TIN
3

Rebar Crank Lap

The rebar crank plug-in allows user to create the cranked laps for reinforcement in RCC structures
by Developer TIN
0
  • Rebar crank lap
  • crank lap

Rebar Clash Crank

Rebar Clash Crank tool will create bend/crank in existing bars at critical junctions where it's clashing with other bars. This tool can be applicable anywhere like beams, columns, slabs etc. And this tool works with rebar/rebar groupgroup of reinforcing bars that are side by side and have identical properties, except the possible variation in bar lengths.
by Developer TIN
1
  • rebar
  • reinforcement
  • Rebar Clash crank
  • rebar crank
  • rebar clash
  • reinforcement clash
  • bend

Rebar Sub ID

Rebar Sub ID tools Generate alphabetic sub id series for tapered range rebar groups in reports and drawings. Rebar Sub ID tools set has 2 Custom Attributes and 1 drawing plug-in.
by Developer TIN
0

Vertical Brace Handle Setout

This tool helps to adjust the vertical brace handle against connected beams and free offset value. How to locate Installers are available at Brace Setout.
by Developer TIN
0

Brace Setout

This tool helps to adjust work line based on predefined parameters for vertical as well as horizontal brace.How to locate Installers are available at Brace Setout.
by Developer TIN
0

Member split

This Tool will help to split the members in various ways. It includes the following features.
by Developer TIN
0

Split Tools

The split tool allows user to split contour plates and  polybeams.How to Locate Installers are available at Split Tools .   The above split  tools toolbar  available after the installation.
by Developer TIN
0
  • Split tools
  • split
  • contour plate
  • polybeam
  • contour plate split
  • polybeam split
  • poly beam
  • slice
  • cutting

Custom Attributes

Few attributes are available in model but cannot be called in reports. This extension installs a set of new variables & which allows to use them wherever it is required such as in reports, marks as templates, drawings, API, filtering, object representationrepresentation of a model object or an object group in a model view that is based on the color and transparency settings applied to the model object or the object group, etc.
by Developer TIN
0
  • Custom variables
  • custom attributes
  • template attributes

Virtual tour

Contents   Purpose and descriptionSystem RequirementsInstalling Virtual tourUsing Virtual tourApplication properties and buttonsAdditional information 
by Steel Extensions
0

Pages

.