Extensions

Hollow Core Middle Recess

Contents This extension allows the user to create recesses in hollow core slabs by adding cuts and extra beams to the hollow core slabplate that represents a concrete structureIn Tekla Structures, a slab is created by picking three or more points.Slab may be part of a floor, for example..
by Area Finland Service
0

Hollow Core End Recess

Contents This extension allows the user to create electric or sewer grooves in hollow core slabs by adding cuts and/or extra beams to the hollow core slabplate that represents a concrete structureIn Tekla Structures, a slab is created by picking three or more points.Slab may be part of a floor, for example..
by Area Finland Service
0

Hollow Core Slab To Edge Beam

Contents 1. Purpose and description2. Using Hollow Core Slab To Edge Beam3. Hollow Core Slab To Edge Beam settings4. Additional information
by Area Finland Service
0

Hollow Core Slab To Middle Beam

Hollow Core Slab To Middle Beam
by Area Finland Service
0

ACN Sequencer

Contents This tool is used to assign Assembly Control Numbers (ACNuser-defined attribute of an assembly or a cast unit that identifies the assembly or cast unit main partA control number does not affect numbering.Control numbers are running numbers.) to Tekla Structures model parts or asssemblies.
by Area Finland Service
0

Double Tee Ridge Beam

Contents Double tee beam with ridge is also known as:- TT slabplate that represents a concrete structureIn Tekla Structures, a slab is created by picking three or more points.Slab may be part of a floor, for example. with ridge or- HTT slab (where H comes from the Finnish word “harja” meaning ridge)
by Area Finland Service
0

Double Tee Ridge Beam

Contents Double tee beam with ridge is also known as:- TT slabplate that represents a concrete structureIn Tekla Structures, a slab is created by picking three or more points.Slab may be part of a floor, for example. with ridge or- HTT slab (where H comes from the Finnish word “harja” meaning ridge)
by Area Finland Service
0

Assign Sequential UDAs

Contents This tool is used to assign sequential numbers to model parts. The numbers are stored as user defined attribute (UDAobject property created by the user in order to widen the range of predefined object propertiesUser-defined attributes are used when the predefined object properties are not sufficient but more properties are needed. For example, comment, locked, and erection status are user-defined attributes.) values.
by Area Finland Service
0

Balcony package

The balcony package is including three components:Balcony, Balcony force joint and Balcony side heels.There are also several embedded component items to use with the balcony components.
by Trimble Solutions Sweden
4.5

Kingspan Diagonal tie (15)

This macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. controls the definition of Diagonal Tie Ropes 
by Trimble Solutions UK
0

Arm diagonal brace

Contents   Purpose and descriptionSystem RequirementsInstalling Arm diagonal braceUsing Arm diagonal bracePart identification keyPictureParts 
by Steel Extensions
0

Arm vertical brace

Contents   Purpose and descriptionSystem RequirementsInstalling Arm vertical braceUsing Arm vertical bracePart identification keyPictureParts  Purpose and description Use Arm vertical brace component to create vertical braces between the top and the bottom legs of truss.
by Steel Extensions
0

Solid construction line

Contents Purpose and descriptionSystem requirementsInstalling Solid construction lineUsing Solid construction lineParametersSee also 
by Steel Extensions
0

Check Manager

Contents   Purpose and descriptionSystem RequirementsInstalling Check ManagerUsing Check ManagerApplication propertiesApplication buttons 
by Steel Extensions
0

Check Manager

Contents   Purpose and descriptionSystem RequirementsInstalling Check ManagerUsing Check ManagerApplication propertiesApplication buttons 
by Steel Extensions
0

Built-up Section Name Settings

This tool is to configure the Built-up Sections designation. This designation is written into the assembly of the built-up section which is created by built-up plugins in the same toolbar. The attribute name is “BuiltUpName” and this value retrieved by GetValue(“BuiltUpName”) call.
by Tekla Extensions Global
0
  • Built-up Section Name Settings

Built-up Angles

The Built-up Angles plug-in allows user to create the built up angle beam along with spacer plates.
by Tekla Extensions Global
0
  • Built Up Angles

Built-up Star Column

The 'Built-up Star Column' plug-in allows user to create the star column from plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. / sections.
by Tekla Extensions Global
0
  • Star Column

Built-up I Beam

The 'Built-up I Beam' plug-in allows user to create the built up I beam from plates / sections.
by Tekla Extensions Global
0
  • Built Up I-Beam

Built-up Box Beam

The 'Built-up Box Beam' plug-in allows user to create the built up box beam from plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. / sections.
by Tekla Extensions Global
0
  • Built Up Box Beam

Pages

.