Extensions

Built-up section converter

This tool is convert the selected parametric profilepredefined profile whose cross section dimensions the user can change by using parametric variables representing a Built-up member to equivalent welded plates or group of welded parts. Based on the selection, these profiles are replaced by built-up custom components or built-up Plug-insHow to Locate ‘Convert to builtup section” plug-in will be available in Builtup tool bar
by Developer TIN
0
  • Built-up
  • Built up
  • Builtup
  • converter
  • section converter

Vertical Brace Handle Setout

This tool helps to adjust the vertical brace handle against connected beams and free offset value. How to locate Installers are available at Brace Setout.
by Developer TIN
0

Brace Setout

This tool helps to adjust work line based on predefined parameters for vertical as well as horizontal brace.How to locate Installers are available at Brace Setout.
by Developer TIN
0

No paint area between parts

Contents   Purpose and descriptionSystem requirementsInstalling No paint area between partsUsing No paint area between partsAnother way to create surfacing attributesGeneralSurfacing AttributesAdditional information 
by Steel Extensions
0

Tapered Hollow Section

The Tapered hollow section plug-in allows to create the hollow sections of conical shapes. Allow to split the total sections in to segments and allow to define different thicknesses at each level.
by Developer TIN
0
  • Tapered hollow section
  • Conical sections
  • conical
  • Hollow sections
  • hollow

Tapered Hollow Section

The Tapered hollow section plug-in allows to create the hollow sections of conical shapes. Allow to split the total sections in to segments and allow to define different thicknesses at each level.
by Developer TIN
0
  • Tapered hollow section
  • Conical sections
  • conical
  • Hollow sections
  • hollow

Kingspan / Metl-Con Std Tie Bay (10)

The Kingspan / Metl-Con Std Tie Bay (10) macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
2.166665

Kingspan / Metl-Con Non-Standard Tie (6)

The Non Std tie bay macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
1

Kingspan / Metl-Con Eaves Beam Restraint (16)

The Eaves Beam Restraint macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. is used to place a strut between the Eaves Beam and the first purlin on a pitched roof.
by Trimble Solutions UK
0

Kingspan / Metl-Con Panel Joint at Mid-Span (21)

When detailing a Horizontal Cladding System, the Kingspan / Metl-Con Panel Joint at Mid-Span (21) macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Kingspan / Metl-Con Panel Joint at Column (11)

When detailing a Horizontal Cladding System, the Kingspan / Metl-Con Panel Joint at Mid-Span (11) macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
3

Kingspan / Metl-Con Apex Tie (9)

The Apex Tie macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Double Tee Top End Detail

Contents This detail type extension creates two fastening plates on the rib location in the end of a double tee beam. 
by Area Finland Service
0

Double Tee Top End Connection

Contents This connection creates the fastening plates located on ribs in the end of the double tee slabplate that represents a concrete structureIn Tekla Structures, a slab is created by picking three or more points.Slab may be part of a floor, for example.. It also creates round bars that are welded into fastening plates at the construction site.
by Area Finland Service
0
by Area Finland Service
0
by Area Finland Service
0

Double Tee Side Connection

Contents This extension connects the double tee beam long sides by adding appropriate standard steel parts, creating cuts and adding a loose steel plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. that is welded into standard steel parts on the construction site.
by Area Finland Service
0

Wall Panel Corner Connection

Contents This connection can transfer much bigger shear force than similar connection having cable loops instead of loops made of reinforcing barreinforcement that represents a steel bar used to reinforce a concrete structureThe steel bars are usually ribbed and they are used to increase the tensile strength of concrete..
by Area Finland Service
0

Hollow Core Area Middle Recess

Contents This extension allows the user to create multiple recesses in the selected hollow core slabs. 1. Purpose and description2. Using [extension]3. Additional information
by Area Finland Service
0

Hollow Core Area End Recess

Contents This extension allows the user to create multiple electric or sewer grooves in the selected hollow core slabs. 1. Purpose and description2. Using Hollow Core Area End Recess3. Additional information
by Area Finland Service
0

Pages

.