Hello!

Did you know that logged in users can see a lot more content?

Extensions

I-Beam Reinforcement: Top flange tab

Use the Top flange tab to define the meshes in the top flange of the I-Beam. SymmetricThe user can define if the zones will be symmetrical or not.If the user selects symmetrical = Yes, then the zone 1 = zone 5 and zone 2 = zone 4.Zone 4 and zone 5 will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Bottom flange tab

Use the Bottom flange tab to define the meshes in the bottom flange of the I-Beam. Same as TopThe user can define if all the settings on this page are identical with the Top flange tab.If this option is set to Yes, all fields on this tap page will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: U bars tab

Use the U bars tab to define the U bars properties.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Attributes tab

Use Attributes tab to define attributes for meshes and u-bars.The grade and bending radius fields are grayed out and filled automatically through the other tab pages.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement

The I-Beam Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. can be used to easily reinforce an I-Beam with bend meshes in top and bottom flange, stem meshes,u-bars in top flange and longitudinal bars along the beam. An example of a beam can be seen below.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Bottom flange tab

Use the Bottom flange tab to define the meshes in the bottom flange of the I-Beam. Same as TopThe user can define if all the settings on this page are identical with the Top flange tab.If this option is set to Yes, all fields on this tap page will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: U bars tab

Use the U bars tab to define the U bars properties.
by Precast Extensions
0
  • I-Beam Reinforcement

Detailing manager

Detailing manager is a component that can be used to apply typical components for detailing any structure. With Detailing manager you can apply multiple components with one click to detail the structure of the entire model.
by Precast Extensions
0

Area Reinforcement: Additional bars tab

Use the Additional bars tab to define placing and parameters of additional bars.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Crossing bars tab

Use the Crossing bars tab to set prefered and minimal spacing between the normal crossing bars and to set the gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planesIn Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines. It is also possible to show grids and grid line labels in drawings, and to modify grid properties in the drawings.It is possible to have more than one grid in a model.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Longitudinal bars tab

Use the Longitudinal bars tab to set prefered and minimal spacing between the normal longitudinal bars and to set the gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planesIn Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement

The Area Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. automatizes the process of reinforcing walls and slabs. Itcreates custom rebar meshes that cover the faces with bigger area of the part.These custom meshes may have different distances between bars and also bars of different sizes.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Parameters tab

Use the Parameters tab to set the meshes to create and their parameters like: Size, Grade, Name, Position prefix and Start no and classpart property that groups parts according to identifiers given by the userThe identifiers of classes are usually numbers. Classes can be used for defining the color of parts in the model, for example. Class does not influence the numbering of model objects..
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Cover thickness tab

Use the Cover thickness tab to set both meshes cover thicknesses from side and from openings. Properties
by Precast Extensions
0
  • Area Reinforcement

Welding tools

Contents Purpose and descriptionSystem RequirementsInstalling Welding toolsUsing Welding tools - universal exampleModelingEdit primary propertiesEdit secondary propertiesSwitch main to secondaryGroup weldUngroup weld
by Steel Extensions
0

Welding tools

Contents Purpose and descriptionSystem RequirementsInstalling Welding toolsUsing Welding tools - universal exampleModelingEdit primary propertiesEdit secondary propertiesSwitch main to secondaryGroup weldUngroup weld
by Steel Extensions
0

Detailing manager

Detailing manager is a component that can be used to apply typical components for detailing any structure. With Detailing manager you can apply multiple components with one click to detail the structure of the entire model.
by Precast Extensions
3.5

GA Reference in Assembly

The Drawing reference tool allows user to get the value of GA Drawingdrawing that is created from one or more model views and that shows information needed to understand the general arrangement of structural elements on a projectGeneral arrangement drawings show how parts, assemblies, cast units, or pour objects are located in a building. reference in UDAobject property created by the user in order to widen the range of predefined object propertiesUser
by Developer TIN
0
  • GA reference in assembly
  • GA reference

Wraparound Dimensioning

Contents Purpose and descriptionSystem requirementsInstalling Wraparound DimensioningUsing Wraparound DimensioningWraparound Dimensioning settingsAdditional information
by Steel Extensions
0

Wraparound Dimensioning

Contents Purpose and descriptionSystem requirementsInstalling Wraparound DimensioningUsing Wraparound DimensioningWraparound Dimensioning settingsAdditional information
by Steel Extensions
0

Pages

.