Hello!

Did you know that logged in users can see a lot more content?

Extensions

Hollow Core Checker

1. Purpose and description Hollow Core Checker is an addition to Tekla Structures extension Model Checker Suite.
by Precast Extensions
0

Truss Cambering Tool

Contents Purpose and descriptionSystem RequirementsInstallationUsageTruss Cambering Tool settingsAdditional information
by Steel Extensions
0

Truss Camber Diagram

Contents Purpose and descriptionSystem RequirementsInstallationUsing the extensionTruss Camber Diagram settingsAdditional information
by Steel Extensions
0

Area Reinforcement

The Area Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. automatizes the process of reinforcing walls and slabs. Itcreates custom rebar meshes that cover the faces with bigger area of the part.These custom meshes may have different distances between bars and also bars of different sizes.
by Precast Extensions
4
  • Area Reinforcement

Sharing Automation Tool

Purpose and descriptionSystem RequirementsInstalling Sharing Automation ToolUsing Sharing Automation Tool Purpose and description Tool reads in and tries to write out until it succeeds. Tool enables scheduled read in that providespossibility to have other user’s changes available when coming to office in the morning.
by Tekla Extensions - General Design
0

I-Beam Reinforcement

The I-Beam Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. can be used to easily reinforce an I-Beam with bend meshes in top and bottom flange, stem meshes, u-bars in top flange and longitudinal bars along the beam. An example of a beam can be seen below.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Attributes tab

Use Attributes tab to define attributes for meshes and u-bars.The grade and bending radius fields are grayed out and filled automatically through the other tab pages.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: U bars tab

Use the U bars tab to define the U bars properties.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Bottom flange tab

Use the Bottom flange tab to define the meshes in the bottom flange of the I-Beam. Same as TopThe user can define if all the settings on this page are identical with the Top flange tab.If this option is set to Yes, all fields on this tap page will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Top flange tab

Use the Top flange tab to define the meshes in the top flange of the I-Beam. SymmetricThe user can define if the zones will be symmetrical or not.If the user selects symmetrical = Yes, then the zone 1 = zone 5 and zone 2 = zone 4.Zone 4 and zone 5 will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Stem mesh tab

Use the Stem meshreinforcement that represents a mesh of steel bars in two perpendicular directionsIn Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars. tab to define meshes in the I-Beam stem.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Picture tab

Use the Picture tab to define types of reinforcing bars and their cover thickness from the IBeam front viewdefault view that is created using the part’s or component’s coordinate system and that shows the part or component from the front directionPart’s front view is a view on part plane created of the part’s front plane..
by Precast Extensions
0
  • I-Beam Reinforcement

Area Reinforcement: Crossing bars tab

Use the Crossing bars tab to set prefered and minimal spacing between the normal crossing bars and to set the gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planesIn Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines. It is also possible to show grids and grid line labels in drawings, and to modify grid properties in the drawings.It is possible to have more than one grid in a model.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Longitudinal bars tab

Use the Longitudinal bars tab to set prefered and minimal spacing between the normal longitudinal bars and to set the gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planesIn Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Parameters tab

Use the Parameters tab to set the meshes to create and their parameters like: Size, Grade, Name, Position prefix and Start no and classpart property that groups parts according to identifiers given by the userThe identifiers of classes are usually numbers. Classes can be used for defining the color of parts in the model, for example. Class does not influence the numbering of model objects..
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Cover thickness tab

Use the Cover thickness tab to set both meshes cover thicknesses from side and from openings. Properties
by Precast Extensions
0
  • Area Reinforcement

ACN Sequencer

Contents This tool is used to assign Assembly Control Numbers (ACNuser-defined attribute of an assembly or a cast unit that identifies the assembly or cast unit main partA control number does not affect numbering.Control numbers are running numbers.) to Tekla Structures model parts or asssemblies.
by Area Finland Service
0

Extension Gallery

Contents Purpose and descriptionInstalling Extension GalleryUsing Extension Gallery
by Steel Extensions
0

Offshore Ring Plate

Contents Purpose and descriptionSystem RequirementsInstalling the Offshore Ring Plate extensionUsing the Offshore Ring Plate extensionOffshore Ring Plate propertiesAdditional informationLimitations on Split PlatesTrouble Shooting
by Steel Extensions
0

Lifting Lug and Lifting Lug Manager

Contents Purpose and descriptionSystem RequirementsInstalling the extensionUsing the extensionAdditional information Purpose and description In certain countries Health and Safety regulations do not allow steel erectors to lift steelwork using chains or straps wrapped around members. Instead it is necessary to provide a positively connected lifting eye or lug.
by Steel Extensions
0

Pages

.