Extensions

Metsec Non-Standard Anti-Sag (25)

The Metsec Non-Standard Anti-Sag macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Metsec Standard Anti-Sag Bay (23)

The Metsec Standard Anti-Sag Bay macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Metsec Simple Hip (14)

The Metsec Simple Hip connection is provided to form a connection between a single cold rolled purlin and a hip or valley rafter.
by Trimble Solutions UK
0

Metsec Shear Plate to Hip (8)

The Metsec Shear Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. to Hip connection is used to create the appropriate items to connect one or two purlins to a hip rafter.
by Trimble Solutions UK
0

Metsec Non-Continuous Rail (106)

The Metsec Non-Continuous Rail system joint is normally used when the specified column face to cladding distance is less than that possible for the standard purlin/rail joint. The joint can handle flush or recessed sheeting lines. A non-standard cleat, (either angle or tee), is welded to the column, and bolted to the rail using holes along the standard gauge lines.
by Trimble Solutions UK
0

Metsec Base Plate (1006)

The Metsec Base Platecomponent object that represents a plate welded to a column baseBase plates are used to distribute the concentrated load of the column over a wider area. detail will add cleats to the bottom end of a column to provide a base for the connection of the column. When used with Metsec sections the detail will use appropriate trimmer cleats by default. You will be required to pick a primary member followed by a point.
by Trimble Solutions UK
0

Metsec Mezzanine Floor Tie Bar (38)

The Metsec Mezzanine Floor Tie Bar macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. allows the placing of mezzanine floor tie bars between mezzanine floor beams.
by Trimble Solutions UK
0

Metsec Gable Post Shear Plate (105)

The Metsec Gable Post Shear Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. is provided as a connection between a C-section or compound C-section column and a gable rafter. However, it may be applied to similar situations.
by Trimble Solutions UK
0

Metsec Eaves Beam to Stanchion (104)

The Metsec Eaves Beam to Stanchion macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Metsec Cold Rolled Sleeved (102)

The Metsec Cold Rolled Sleeved connection is used to connect one or two purlins/rails to a rafter/stanchion. It can be used for sleeved joints, butt joints, in the middle of double span purlins/rails, and at gable ends. It should not be used for connections to hip rafters for which a separate joint is available. For simplicity, this help text, and the joint dialogue, will refer only to purlins and rafters, but unless explicitly stated otherwise, these terms should be taken to mean purlins/rails and rafters/stanchions.
by Trimble Solutions UK
0

Chair Bars

This plug-in allows to create chair bars in selected slabs / specified region. It arranges chair bars based on input directions. This tool contains option to exclude intermediate beam portion, openings and specified regions.
by Anil Kumar Kolla
0
  • Chair bars
  • chairbars
  • cover blocks
  • coverblocks
  • chair bar
  • Slab reinforcement

Built-up Angles (Custom Part)

The Built-up Angles custom partcomponent for creating a part that cannot be created by using any existing part command or part profileTypically, custom parts are used to create parts that have a complex composition. For example, castellated beams and sandwich panels are often created as custom parts. allows user to create the built up angle beam along with spacer plates.
by Tekla Extensions Global
0
  • Built Up Angles
  • Builtup
  • Custom Parts
  • Built-up

Built-up Custom Parts Name Settings

This tool is to configure the Built-up Custom Parts designation. This designation is written into the assembly of the built-up section which is created by built-up custom parts. The attribute name is “BuiltUpName” and this value retrieved by GetValue(“BuiltUpName”) call.
by Tekla Extensions Global
0
  • Built-up Custom Part Name Settings
  • Built up
  • Builtup
  • Custom Part
  • Built-up
  • Built-up Section Name Settings

Built-up Star Column (Custom Part)

The 'Built-up Star Column' custom partcomponent for creating a part that cannot be created by using any existing part command or part profileTypically, custom parts are used to create parts that have a complex composition.
by Tekla Extensions Global
0
  • Star Column
  • Builtup
  • Custom Parts
  • Built-up
  • column

Built-up C Beam (Custom Part)

The Built-up C-beam custom partcomponent for creating a part that cannot be created by using any existing part command or part profileTypically, custom parts are used to create parts that have a complex composition. For example, castellated beams and sandwich panels are often created as custom parts. allows user to create the built up channel beam made with plates.How to Locate  
by Tekla Extensions Global
0
  • Built Up C Beam
  • Builtup
  • Custom Parts
  • Built-up
  • beam

Built-up Box Column (Custom Part)

The 'Built-up Box Beam' custom partcomponent for creating a part that cannot be created by using any existing part command or part profileTypically, custom parts are used to create parts that have a complex composition.
by Tekla Extensions Global
0
  • Built Up Box Column
  • Builtup
  • Custom Parts
  • Built-up
  • column

Built-up Box Beam (Custom Part)

The 'Built-up Box Beam' custom partcomponent for creating a part that cannot be created by using any existing part command or part profileTypically, custom parts are used to create parts that have a complex composition.
by Tekla Extensions Global
0
  • Built Up Box Beam
  • Builtup
  • Custom Parts
  • Built-up
  • beam

Built-up I Column (Custom Part)

The 'Built-up I Column' custom partcomponent for creating a part that cannot be created by using any existing part command or part profileTypically, custom parts are used to create parts that have a complex composition. For example, castellated beams and sandwich panels are often created as custom parts. allows user to create the built up I column from plates / sections.
by Tekla Extensions Global
0
  • Built Up I Column
  • Builtup
  • Custom Parts
  • Built-up
  • column

Built-up I Beam (Custom Part)

The 'Built-up I Beam' custom partcomponent for creating a part that cannot be created by using any existing part command or part profileTypically, custom parts are used to create parts that have a complex composition. For example, castellated beams and sandwich panels are often created as custom parts. allows user to create the built up I beam from plates / sections.
by Tekla Extensions Global
0
  • Built Up I Beam
  • Builtup
  • Custom Parts
  • Built-up
  • beam

PEB Anti-sag apex

PEB Anti-sag apex allows you to create anti-sag members for apex (ridge) purlins of a PEB building.How to locate The installers are available at Pre-Engineered Building Tools for Tekla Structures version 21.0 and above.After the installation the icon shown below is available in the Applications & Components. 
by Developer TIN
0
  • Sag Rod
  • Anti sag
  • Anti-sag
  • Apex
  • Anti sag apex
  • Anti-sag apex
  • Bend sag rod

Pages

.