Extensions

PEB Ridge Rafter

PEB Ridge Rafter can be created by two independent plugins.  PEB Ridge Rafter by Two Rafters PEB Ridge Rafter by Three Points Basically this two plugins are similar except input criteria
by Developer TIN
0
  • PEB
  • Pre Engineered Buildings
  • PEB Connections
  • PEB Components
  • PEB Ridge Rafter
  • Ridge
  • rafter
  • PEB Beam
  • plated beam
  • plated ridge rafter

PEB Splice

The PEB Splice plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. allows you to create a splice plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel struct
by Developer TIN
0
  • PEB
  • Pre Engineered Buildings
  • PEB Connections
  • PEB Components
  • PEB Splice
  • Splice
  • PEB Splice Connection
  • Splice Connection

PEB Steel line

PEB Steel line allows you to create a steel line and reference lines for a particular bay or for the entire building.
by Developer TIN
0
  • PEB Steel Line

Drawing View Manager

The ‘Drawing Viewview that includes selected model objects or an area in the model, that is represented in a drawing A drawing view is a container for model and drawing objects.A drawing can include several drawing views, which usually are two-dimensional views, plane views, to the model.Examples of drawing views in Tekla Structures include main views, section views, single-part views, and 3D views. Manager’ applicationpart o
by Developer TIN
0
  • Drawing view manager
  • drawing view
  • view alignment
  • align views

Drawing number update

This applicationpart of Tekla Structures functionality that is developed in order to extend the capability of Tekla Structures but that is not included in the Tekla Structures installation updates / modifies the existing drawing number into the specified field. You can increment the character / number as per your requirement. Prefix and suffix are used for character increment and drawing number is used for number increment. This can be run over selected drawings as well.
by Developer TIN
0
  • Drawing numbar update
  • drawing update
  • numbar update

Drawing Font Checker

This tool allows user to check the properties of 'Text' used in all or selected drawings.How to Locate Installers are available at Drawing Checker Suite
by Developer TIN
0
  • drawing check
  • font check

Associative Value Hidden Checker

This tool is check associate value of Dimensions, Part markmark that includes a set of selected property elements related to a partPart marks are used for identifying constructions, for giving information about welding, for giving information about assemblies to a workshop, for giving information about how parts should be connected to each other, and for creating bills of quantities, for example.
by Developer TIN
0
  • associate value
  • hidden value
  • part mark

Drawing View out of sheet Checker

This toolk allows user to check the view properties in all or selected drawings to check whether the views are inside the drawing frame or not.How to Locate Installers are available at Drawing Checker Suite
by Developer TIN
0
  • drawing check
  • view check
  • out of sheet
  • VIEW

Drawing Part Mark Label Checker

The tool is allows user to quickly find out the any part in the drawing is labelled or not.How to Locate Installers are available at Drawing Checker Suite
by Developer TIN
0
  • drawing check
  • part mark check
  • part mark
  • check

Dimension Precision Checker

This tool is check the all dimesions in the selected drawing or all drawings for the precision value used with the standard value. How to Locate Installers are available at Drawing Checker Suite
by Developer TIN
0
  • dimension precision check
  • precision

Built-up section converter

This tool is convert the selected parametric profilepredefined profile whose cross section dimensions the user can change by using parametric variables representing a Built-up member to equivalent welded plates or group of welded parts. Based on the selection, these profiles are replaced by built-up custom components or built-up Plug-insHow to Locate ‘Convert to builtup section” plug-in will be available in Builtup tool bar
by Developer TIN
0
  • Built-up
  • Built up
  • Builtup
  • converter
  • section converter

PEB Anti-sag roof and wall

PEB Anti-sag roof and wall allows you to create anti-sag members for either roof or wallplate that represents a structure such as a wall or roof panelIn Tekla Structures, a panel is created by picking two or more points.In cast-in-place concrete the term wall refers to a concept similar to panel. purlins.
by Developer TIN
0
  • Sag Rod
  • Anti sag
  • Anti-sag
  • Apex
  • Anti sag wall
  • Anti-sag wall
  • Bend sag rod
  • Anti sag roof
  • Anti-sag roof

Multi Depth Stiffener

The Multi Depth Stiffenercomponent object that represents a structure that strengthens a steel beam or columnStiffeners are usually plates.Stiffeners are used to prevent web buckling at supports or concentrated loads. plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog.
by Developer TIN
0
  • Multi Depth stiffener
  • stiffener
  • PEB
  • Pre Engineered Buildings
  • PEB stiffener
  • Plate Stiffener
  • PEB Connections
  • PEB Components

Transition Duct

The Duct and Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. Work tool allows user to create the rectangular and trapezoidal duct with 4 plates of same or different material and finish.
by Developer TIN
0
  • Duct
  • Transition duct
  • straight duct
  • bin

Duct Stiffeners

This tool is to create stiffeners on the wallplate that represents a structure such as a wall or roof panelIn Tekla Structures, a panel is created by picking two or more points.In cast-in-place concrete the term wall refers to a concept similar to panel. of the duct according to varying size of the wall plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to pl
by Developer TIN
0
  • Stiffeners
  • Duct Stiffeners
  • Bin Stiffeners

Duct Inner Bent Plate

This tool will create a bent plate(1) part that is created from contour plates, or beams whose profile is a plate(1) Bent plates can include conical or cylindrical sections.(1) Curved beams, spiral beams, or deformed parts cannot be used for creating a bent plate.(2) component object that represents an angle that is bent from a plate and that connects parts/angle profile at the junction of two wallplate that represents a structure such as a w
by Developer TIN
0
  • Duct inner bent plate
  • inner angle

Material Code Manager

The Material Code Manager allows user to apply material codes to part UDA’s based on it’s profile.How to Locate After installation, ‘Material Code Manager’ icon can be seen in the componet cataloguser interface for displaying or modifying information in categorized listsFor example, profile catalog and shape catalog are catalogs..
by Developer TIN
0
  • Material code manager
  • material
  • material code

Platform Grating

The Platform grating applicationpart of Tekla Structures functionality that is developed in order to extend the capability of Tekla Structures but that is not included in the Tekla Structures installation allows user to create the desired gratings as per the requirements stated in the dialog boxes System requirements Tekla Structures version:       Refer download page.NET Framework version:      4.0Environments:   Refer download page
by Developer TIN
3
  • Grating
  • platform grating
  • platform

Toe Plates around Member

The toe plates around circle plug-in allows user to create the toe plates between the grating plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. and the curved member
by Developer TIN
0
  • Grating
  • platform grating
  • toe plate
  • kicker plate

Toe Plates around Polygon

The toe plates along polygon plug-in allows user to create the toe plates between the grating plates and the picked polygon points. System requirements Tekla Structures version:       Refer download page.NET Framework version:      4.0Environments:   Refer download page
by Developer TIN
0
  • Grating
  • platform grating
  • toe plate
  • kicker plate

Pages

.