Hello!

Did you know that logged in users can see a lot more content?

Extensions

Kingspan Eaves Beam To Stanchion (27)

The Kingspan eaves beam to stanchion connection will define a fixing bracket according to the set of parameters specified with by standard stooling dimensions. The joint will define all bolts and welds required, and where appropriate will also fit the ends of the Eaves Beams to leave the correct end gapany space between two objectsThe term gap is used in its general sense in Tekla Structures.. The joint behaviour will depend on whether the eaves beam arrangement is flush or stand off.
by Trimble Solutions UK
4

Kingspan Standard Horizontal Cladding Support (31)

When detailing a Horizontal Cladding Support, the Kingspan (31) macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Kingspan File Transfer (18)

This macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Kingspan Standard Tie Bay (10)

The Kingspan Std Tie Bay (10) macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
2

Kingspan Autoform Detail (3)

Much like the One Sided Auto-Form Detail the Kingspan Auto Form Detail connects the multichannel to the main member. Selection Process: Select Primary cold-rolled member Select position on secondary member Limitations: Length of the Secondary member must be perpendicular to the main members length
by Trimble Solutions UK
0

Kingspan Simple Hip (14)

The Simple Hip Connection is provided to form a connection between a single cold-rolled purlin and a hip or valley rafter Selection Process: Rafter/Hot-Rolled member Kingspan cold-rolled 
by Trimble Solutions UK
0
by Trimble Solutions UK
0

Kingspan Autoform One Sided (20)

This connection Autoform one Sided (20) is used to connect a Multichannel (Compound or Single) to a main member     Selection Process: Select Primary cold-rolled member Select Secondary cold-rolled member Limitations:
by Trimble Solutions UK
0

Kingspan Shearplate to hip (8)

The Kingspan Shearplate to hip connection is used to connect one or two purlins/rails to a rafter/stanchion. It can be used for connections to Hip rafters, in the middle of double span purlins/rails.  Selection Process: Select Main Member Select Secondary parts and press middle button
by Trimble Solutions UK
0

Kingspan Cleader Angle (13)

When detailing a Kingspan Cleader Angle (13) macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Kingspan Gable Post Shear Plate (105)

Selection Process: Pick main member i.e. Hot-Rolled/Rafter Mutlichannel/Gable post member
by Trimble Solutions UK
0

Kingspan Apex Tie (9)

The Apex Tie macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Kingspan Multichannel Base Cleat (4)

This detail will define either AUTOFORMED end(s) for the column with a base platecomponent object that represents a plate welded to a column baseBase plates are used to distribute the concentrated load of the column over a wider area., single/double cold rolled cleats with a base plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that repr
by Trimble Solutions UK
0

Kingspan Panel Joint at Mid-Span (21)

When detailing a Horizontal Cladding System, the Kingspan / Metl-Con Panel Joint at Mid-Span (21) macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Organizer - Task Manager Link

With the Organizertool that is used for categorizing and managing model information, object properties and object property queries, and model object classificationOrganizer consists of two tools, object browser and categories. - Task Managertool that enables the linking of temporal data to a modelThe task manager can be used to create, save, and manage tasks that are used to create a schedule.Model objects can be added to the tasks.
by Tekla Extensions Global
0
  • Task Manager
  • Organizer
  • link
  • task
  • categories
  • category
  • copy

Kingspan Horizontal Cladding sleeve (120)

The Cold Rolled Sleeved connection is used to connect one or two Kingspan channels to a Hot-rolled member. It can be used for sleeved joints; butt joints; in the middle of double span purlins/rails; and at gable ends. It should not be used for connections to Hip rafters for which a separate joint is available. Selection Process:
by Trimble Solutions UK
0

Curved Rebars for coupler Toolbox

ContentsPurpose and descriptionSystem requirementsInstalling Curved Rebars For Coupler Toolbox
by Trimble Solutions France
0
  • coupler
  • curved
  • rebar
  • coupleur
  • manchon
  • dextra

Cranking of overlapping rebars

  Use for:   Visualization of overlapping rebars.   Example:   Example
by Precast Extensions
5
  • Cranking of overlapping rebars

Area Reinforcement

The Area Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. automatizes the process of reinforcing walls and slabs. Itcreates custom rebar meshes that cover the faces with bigger area of the part.These custom meshes may have different distances between bars and also bars of different sizes.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Crossing bars tab

Use the Crossing bars tab to set prefered and minimal spacing between the normal crossing bars and to set the gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planesIn Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines. It is also possible to show grids and grid line labels in drawings, and to modify grid properties in the drawings.It is possible to have more than one grid in a model.
by Precast Extensions
0
  • Area Reinforcement

Pages

.