Extensions

Duct Inner Bent Plate

This tool will create a bent plate(1) part that is created from contour plates, or beams whose profile is a plate(1) Bent plates can include conical or cylindrical sections.(1) Curved beams, spiral beams, or deformed parts cannot be used for creating a bent plate.(2) component object that represents an angle that is bent from a plate and that connects parts/angle profile at the junction of two wallplate that represents a structure such as a w
by Developer TIN
0
  • Duct inner bent plate
  • inner angle

Transition Duct

The Duct and Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. Work tool allows user to create the rectangular and trapezoidal duct with 4 plates of same or different material and finish.
by Developer TIN
0
  • Duct
  • Transition duct
  • straight duct
  • bin

Transition Duct

The Duct and Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. Work tool allows user to create the rectangular and trapezoidal duct with 4 plates of same or different material and finish.
by Developer TIN
0
  • Duct
  • Transition duct
  • straight duct
  • bin

Duct Inner Bent Plate

This tool will create a bent plate(1) part that is created from contour plates, or beams whose profile is a plate(1) Bent plates can include conical or cylindrical sections.(1) Curved beams, spiral beams, or deformed parts cannot be used for creating a bent plate.(2) component object that represents an angle that is bent from a plate and that connects parts/angle profile at the junction of two wallplate that represents a structure such as a w
by Developer TIN
0
  • Duct inner bent plate
  • inner angle

Duct Stiffeners

This tool is to create stiffeners on the wallplate that represents a structure such as a wall or roof panelIn Tekla Structures, a panel is created by picking two or more points.In cast-in-place concrete the term wall refers to a concept similar to panel. of the duct according to varying size of the wall plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to pl
by Developer TIN
0
  • Stiffeners
  • Duct Stiffeners
  • Bin Stiffeners

Continuous Column Reinforcement

This tool provide reinforcement for Column which is continuous and changing size. It includes staggered lapping of reinforcement, end condition and starter bar.
by Developer TIN
0

Continuous Column Reinforcement

This tool provide reinforcement for Column which is continuous and changing size. It includes staggered lapping of reinforcement, end condition and starter bar.
by Developer TIN
0

Similar Assemblies Filter

The Drawing Express Tool – Helps to group similar assemblies based on predefined conditions.
by Developer TIN
0
  • Similar assembly filter
  • similar assembly
  • similar assemblies
  • assembly filter

Continuous Column Reinforcement

This tool provide reinforcement for Column which is continuous and changing size. It includes staggered lapping of reinforcement, end condition and starter bar.
by Developer TIN
0

Chair Bars

This plug-in allows to create chair bars in selected slabs. It arranges chair bars in X and Y direction with desired spacing, bars will be removed at all openings and user can also select parts or polygons to remove the chair bars.
by Developer TIN
5
  • Chair bars
  • chairbars
  • cover blocks
  • coverblocks
  • chair bar
  • Slab reinforcement

Continuous Column Reinforcement

This tool provide reinforcement for Column which is continuous and changing size. It includes staggered lapping of reinforcement, end condition and starter bar.
by Developer TIN
5

Single Part View handling

Assembly drawingdrawing that shows fabrication information for a basic or a nested assembly, including bolts and welds, and that is generally used at the workshopAssembly drawings show how parts are located in an assembly. They contain the parts of the assembly presented in one or more views. with single parts when linked in Multidrawings , single part views get duplicated if they are available in more than one assembly drawing , user has to manually find and delete them.
by Developer TIN
0
  • single part view handling
  • single part view
  • single part views
  • view deleting

Chair Bars

This plug-in allows to create chair bars in selected slabs. It arranges chair bars in X and Y direction with desired spacing, bars will be removed at all openings and user can also select parts or polygons to remove the chair bars.
by Developer TIN
5
  • Chair bars
  • chairbars
  • cover blocks
  • coverblocks
  • chair bar
  • Slab reinforcement

Chair Bars

This plug-in allows to create chair bars in selected slabs. It arranges chair bars in X and Y direction with desired spacing, bars will be removed at all openings and user can also select parts or polygons to remove the chair bars.
by Developer TIN
0
  • Chair bars
  • chairbars
  • cover blocks
  • coverblocks
  • chair bar
  • Slab reinforcement

Single Part View handling

Assembly drawingdrawing that shows fabrication information for a basic or a nested assembly, including bolts and welds, and that is generally used at the workshopAssembly drawings show how parts are located in an assembly. They contain the parts of the assembly presented in one or more views. with single parts when linked in Multidrawings , single part views get duplicated if they are available in more than one assembly drawing , user has to manually find and delete them.
by Developer TIN
0
  • single part view handling
  • single part view
  • single part views
  • view deleting

Single Part View handling

Assembly drawingdrawing that shows fabrication information for a basic or a nested assembly, including bolts and welds, and that is generally used at the workshopAssembly drawings show how parts are located in an assembly. They contain the parts of the assembly presented in one or more views. with single parts when linked in Multidrawings , single part views get duplicated if they are available in more than one assembly drawing , user has to manually find and delete them.
by Developer TIN
0
  • single part view handling
  • single part view
  • single part views
  • view deleting

Anchor Rods

The Anchor rods allows user to create the anchor rods for any base platecomponent object that represents a plate welded to a column baseBase plates are used to distribute the concentrated load of the column over a wider area. with bolts.
by Developer TIN
0
  • anchor rods
  • anchors
  • baseplate anchors
  • base plate anchor
  • anchor rod
  • anchor

Hoop Bars

The Hoop bar plug-in allows to create the hoop reinforcement in tanks and conical shaped structures.
by Developer TIN
0
  • Circular Rebar
  • Curved bars
  • curved rebar
  • curved reinforcement
  • hoop
  • Hoop Bars
  • reinforcement

Circular Panel Reinforcement

The circular panel reinforcement plug-in allows user to create the reinforcement for circular walls/footings, straight walls/footings and circular panels. The plug-in automatically cut the rebar based on defined stock length and apply the normal lap or cranked lab based on the user choice.  
by Developer TIN
0
  • circular
  • circular panel
  • Circular reinforcement
  • circular wall
  • radial
  • radial reinforcement

Hoop Bars

The Hoop bar plug-in allows to create the hoop reinforcement in tanks and conical shaped structures.
by Developer TIN
0
  • Circular Rebar
  • Curved bars
  • curved rebar
  • curved reinforcement
  • hoop
  • Hoop Bars
  • reinforcement

Pages

.