Extensions

Area Reinforcement: Cover thickness tab

Use the Cover thickness tab to set both meshes cover thicknesses from side and from openings. Properties
by Precast Extensions
0
  • Area Reinforcement

Vico Import Export

Type:                          Applicationpart of Tekla Structures functionality that is developed in order to extend the capability of Tekla Structures but that is not included in the Tekla Structures installation
by Tekla Extensions Global
0

I-Beam Reinforcement

The I-Beam Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. can be used to easily reinforce an I-Beam with bend meshes in top and bottom flange, stem meshes,u-bars in top flange and longitudinal bars along the beam. An example of a beam can be seen below.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Attributes tab

Use Attributes tab to define attributes for meshes and u-bars.The grade and bending radius fields are grayed out and filled automatically through the other tab pages.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: U bars tab

Use the U bars tab to define the U bars properties.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Bottom flange tab

Use the Bottom flange tab to define the meshes in the bottom flange of the I-Beam. Same as TopThe user can define if all the settings on this page are identical with the Top flange tab.If this option is set to Yes, all fields on this tap page will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Top flange tab

Use the Top flange tab to define the meshes in the top flange of the I-Beam. SymmetricThe user can define if the zones will be symmetrical or not.If the user selects symmetrical = Yes, then the zone 1 = zone 5 and zone 2 = zone 4.Zone 4 and zone 5 will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Stem mesh tab

Use the Stem meshreinforcement that represents a mesh of steel bars in two perpendicular directionsIn Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars. tab to define meshes in the I-Beam stem.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Picture tab

Use the Picture tab to define types of reinforcing bars and their cover thickness from the IBeam front viewdefault view that is created using the part’s or component’s coordinate system and that shows the part or component from the front directionPart’s front view is a view on part plane created of the part’s front plane..
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement

The I-Beam Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. can be used to easily reinforce an I-Beam with bend meshes in top and bottom flange, stem meshes,u-bars in top flange and longitudinal bars along the beam. An example of a beam can be seen below.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Attributes tab

Use Attributes tab to define attributes for meshes and u-bars.The grade and bending radius fields are grayed out and filled automatically through the other tab pages.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: U bars tab

Use the U bars tab to define the U bars properties.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Bottom flange tab

Use the Bottom flange tab to define the meshes in the bottom flange of the I-Beam. Same as TopThe user can define if all the settings on this page are identical with the Top flange tab.If this option is set to Yes, all fields on this tap page will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Top flange tab

Use the Top flange tab to define the meshes in the top flange of the I-Beam. SymmetricThe user can define if the zones will be symmetrical or not.If the user selects symmetrical = Yes, then the zone 1 = zone 5 and zone 2 = zone 4.Zone 4 and zone 5 will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

Area Reinforcement

The Area Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. automatizes the process of reinforcing walls and slabs. Itcreates custom rebar meshes that cover the faces with bigger area of the part.These custom meshes may have different distances between bars and also bars of different sizes.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Additional bars tab

Use the Additional bars tab to define placing and parameters of additional bars.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Crossing bars tab

Use the Crossing bars tab to set prefered and minimal spacing between the normal crossing bars and to set the gridmodeling aid that represents a three-dimensional complex of intersecting grid planes or intersecting grid planes and curved grid surfacesThe grid is defined by coordinates in 3D space. It is shown two-dimensionally on the view plane by dash-and-dot lines. A grid can be rectangular or radial.It is possible to have more than one grid in a model.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Longitudinal bars tab

Use the Longitudinal bars tab to set prefered and minimal spacing between the normal longitudinal bars and to set the gridmodeling aid that represents a three-dimensional complex of intersecting grid planes or intersecting grid planes and curved grid surfacesThe grid is defined by coordinates in 3D space. It is shown two-dimensionally on the view plane by dash-and-dot lines. A grid can be rectangular or radial.It is possible to have more than one grid in a model.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Parameters tab

Use the Parameters tab to set the meshes to create and their parameters like: Size, Grade, Name, Position prefix and Start no and classpart property that groups parts according to identifiers given by the userThe identifiers of classes are usually numbers. Classes can be used for defining the color of parts in the model, for example. Class does not influence the numbering of model objects..
by Precast Extensions
4
  • Area Reinforcement

Area Reinforcement

The Area Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. automatizes the process of reinforcing walls and slabs. Itcreates custom rebar meshes that cover the faces with bigger area of the part.These custom meshes may have different distances between bars and also bars of different sizes.
by Precast Extensions
0
  • Area Reinforcement

Pages

.