Extensions

Hollow Core Slab To Edge Beam

Contents 1. Purpose and description2. Using Hollow Core Slab To Edge Beam3. Hollow Core Slab To Edge Beam settings4. Additional information
by Area Finland Service
0

Hollow Core Slab To Edge Beam

Contents 1. Purpose and description2. Using Hollow Core Slab To Edge Beam3. Hollow Core Slab To Edge Beam settings4. Additional information
by Area Finland Service
0

Assign Sequential UDAs

Contents This tool is used to assign sequential numbers to model parts. The numbers are stored as user defined attribute (UDAobject property created by the user in order to widen the range of predefined object propertiesUser-defined attributes are used when the predefined object properties are not sufficient but more properties are needed. For example, comment, locked, and erection status are user-defined attributes.) values.
by Area Finland Service
0

Double Tee Ridge Beam

Contents Double tee beam with ridge is also known as:- TT slabplate that represents a concrete structureIn Tekla Structures, a slab is created by picking three or more points.Slab may be part of a floor, for example. with ridge or- HTT slab (where H comes from the Finnish word “harja” meaning ridge)
by Area Finland Service
0

Mesh Bars

Creates reinforcement for concrete slabs and walls.  Bars created     Primary bars     Crossing bars Use for Situation More information Mesh bars creates reinforcement for bottom or top surface of the concrete element, or for both. Using Mesh Bars Select concrete slabplate that represents a concrete structureIn Tekla Structures, a slab is created by picking three or more points.Slab may be part of a floor, for example. See also Mesh Bars: Picture tabMesh Bars: Detailing tabMesh Bars: Bar end conditions tabMesh Bars: Attributes tab
by Precast Extensions
0
by Area Finland Service
2.5

Double Tee Top End Detail

Contents This detail type extension creates two fastening plates on the rib location in the end of a double tee beam. 
by Area Finland Service
0

Double Tee Top End Connection

Contents This connection creates the fastening plates located on ribs in the end of the double tee slabplate that represents a concrete structureIn Tekla Structures, a slab is created by picking three or more points.Slab may be part of a floor, for example.. It also creates round bars that are welded into fastening plates at the construction site.
by Area Finland Service
0

Double Tee Side Connection

Contents This extension connects the double tee beam long sides by adding appropriate standard steel parts, creating cuts and adding a loose steel plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. that is welded into standard steel parts on the construction site.
by Area Finland Service
0

Wall Panel Corner Connection

Contents This connection can transfer much bigger shear force than similar connection having cable loops instead of loops made of reinforcing barreinforcement that represents a steel bar used to reinforce a concrete structureThe steel bars are usually ribbed and they are used to increase the tensile strength of concrete..
by Area Finland Service
0

Wall Panel Corner Connection

Contents This connection can transfer much bigger shear force than similar connection having cable loops instead of loops made of reinforcing barreinforcement that represents a steel bar used to reinforce a concrete structureThe steel bars are usually ribbed and they are used to increase the tensile strength of concrete..
by Area Finland Service
0
by Tekla Structures Extensions UK
0

Neutral File Import/Export

Neutral File Import/Export Extensions These import/export extensions are designed to integrate Tekla Structures with CSC's Fastrak Building designer and Orion design software. The Fastrak links allow round tripping of information between Tekla Structures and Fastrak Building Designer.
by Tekla Structures Extensions UK
0
by Tekla Structures Extensions UK
0

Export to Orion

    Introduction
by Tekla Structures Extensions UK
0

Print Drawings to PDF

Contents Purpose and descriptionSystem RequirementsInstalling the Print Drawings to PDF extensionUsing the extensionKnown limitations of this version
by Steel Extensions
3

Complex polybeam creation

Contents   Purpose and descriptionSystem RequirementsInstalling Complex polybeam creationUsing Complex polybeam creationPictureAttributesPositionSee also 
by Steel Extensions
0

Leg bent plate

Contents   Purpose and descriptionSystem RequirementsInstalling Leg bent plateUsing Leg bent platePart identification keyPicture
by Steel Extensions
0

ACN Sequencer

Contents This tool is used to assign Assembly Control Numbers (ACNuser-defined attribute of an assembly or a cast unit that identifies the assembly or cast unit main partA control number does not affect numbering.Control numbers are running numbers.) to Tekla Structures model parts or asssemblies.Purpose and descriptionUsing ACN Sequencer 
by Area Finland Service
5

Unfolded bent plate

Contents   Purpose and descriptionSystem RequirementsInstalling Unfolded bent plateUsing Unfolded bent platePart identification keyApplication properties
by Steel Extensions
0

Pages

.