Hello!

Did you know that logged in users can see a lot more content?

Extensions

I-Beam Reinforcement: Picture tab

Use the Picture tab to define types of reinforcing bars and their cover thickness from the IBeam front viewdefault view that is created using the part’s or component’s coordinate system and that shows the part or component from the front directionPart’s front view is a view on part plane created of the part’s front plane..
by Precast Extensions
0
  • I-Beam Reinforcement

Area Reinforcement: Crossing bars tab

Use the Crossing bars tab to set prefered and minimal spacing between the normal crossing bars and to set the gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planesIn Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines. It is also possible to show grids and grid line labels in drawings, and to modify grid properties in the drawings.It is possible to have more than one grid in a model.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Longitudinal bars tab

Use the Longitudinal bars tab to set prefered and minimal spacing between the normal longitudinal bars and to set the gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planesIn Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Parameters tab

Use the Parameters tab to set the meshes to create and their parameters like: Size, Grade, Name, Position prefix and Start no and classpart property that groups parts according to identifiers given by the userThe identifiers of classes are usually numbers. Classes can be used for defining the color of parts in the model, for example. Class does not influence the numbering of model objects..
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Cover thickness tab

Use the Cover thickness tab to set both meshes cover thicknesses from side and from openings. Properties
by Precast Extensions
0
  • Area Reinforcement

ACN Sequencer

Contents This tool is used to assign Assembly Control Numbers (ACNuser-defined attribute of an assembly or a cast unit that identifies the assembly or cast unit main partA control number does not affect numbering.Control numbers are running numbers.) to Tekla Structures model parts or asssemblies.
by Area Finland Service
0

Extension Gallery

Contents Purpose and descriptionInstalling Extension GalleryUsing Extension Gallery
by Steel Extensions
0

Offshore Ring Plate

Contents Purpose and descriptionSystem RequirementsInstalling the Offshore Ring Plate extensionUsing the Offshore Ring Plate extensionOffshore Ring Plate propertiesAdditional informationLimitations on Split PlatesTrouble Shooting
by Steel Extensions
0

Lifting Lug and Lifting Lug Manager

Contents Purpose and descriptionSystem RequirementsInstalling the extensionUsing the extensionAdditional information Purpose and description In certain countries Health and Safety regulations do not allow steel erectors to lift steelwork using chains or straps wrapped around members. Instead it is necessary to provide a positively connected lifting eye or lug.
by Steel Extensions
0

Rebar Coupler and Anchor Tools

1. Purpose and description Rebar Coupler and Anchor Tools is a set of four extensions to help modeling and management of reinforcement bar couplers (connecting two bars) and end anchors (device at free end of the bar).
by CIP extensions
0

Firm Folder Manager

Firm Folderfolder that is used for storing Tekla Structures-related files customized for a particular organizationA Tekla Structures user can, for example, customize a company’s cloning templates and save them in a sub-folder located under the firm folder. After this, the customized cloning templates can be used in all projects carried out for the company. Manager 1.0 Purpose and description
by Trimble Solutions India
2.1

Wall Elementation Components

Wall Elementation Components Contents Purpose and descriptionSystem RequirementsInstalling Wall Elementation ComponentsUsing Wall Elementation ComponentsAdditional information
by Precast Extensions
0

Wall To Wall Connection

1. Purpose and description
by Precast Extensions
4.5

DSTV File Name Modifier

1. Purpose and description
by Trimble Solutions ME
5
by Trimble Solutions Sweden
4

m•connect Production length of tension rod

Maximum production length for the single tension rod and with one connection
by Trimble Solutions Sweden
0

ASDO lockcover

Select two points in the direction on how you wish to place the lockcover. The yellow handle symbolizes the start point and the purple handle the direction of the component.
by Trimble Solutions Sweden
3.5

ASDO fork end

Select two points in the direction you wish to place the fork end. The yellow handle symbolizes the start point and the purple handle the direction of the component.
by Trimble Solutions Sweden
1

m•connect

Global resellers: http://www.mconnect-systems.de/service-contact/sales-region.html
by Trimble Solutions Sweden
2.666665

SFS Intec Wood Connector Screws

Select two points in the direction on how you wish to place the Wood Connector Screws. The yellow handle symbolizes the start point and the purple handle the direction of the component.For more information: http://www.sfsintec.biz/mo/se/sv/web/about_us/publications_and_media/dow...
by Trimble Solutions Sweden
0

Pages

.