Hello!

Did you know that logged in users can see a lot more content?

Extensions

Formwork Placing tools - Walls: Release notes

Release 2.5 22 March, 2019 New features Easier to control formwork items Formwork placing tools now automatically write UDA’s on placed items These attributes enable easier control for formwork items in model and drawing side Usable for ribbon controls, selection and view filters, drawing settings Formwork tools are writing attributes below by following basis TW_CATEGORY = FORMWORK if Formwork placing tools are used
by CIP extensions
0
by CIP extensions
0

Palletizer

The Tekla Structures Palletizer workflow tool is a 3D applicationpart of Tekla Structures functionality that is developed in order to extend the capability of Tekla Structures but that is not included in the Tekla Structures installation for planning and arranging precast elements for production, considering the needs of precast manufactures and supplying engineering offices.
by Precast Extensions
4
  • precast
  • pallet
  • production
  • planner

Spiral staircase

Contents Purpose and descriptionSystem requirementsInstalling Spiral staircaseUsing Spiral staircaseGeneral tabStep tabParts tabStringer tab   Purpose and description Use Spiral staircase to create and model a spiral staircase.
by Steel Extensions
5

Formwork placing tools for walls - tool configuration

Setting up the tool for a new formwork supplier
by CIP extensions
5

Z Pan Dimensioning

ContentsPurpose and descriptionSystem requirementsInstalling Z Pan DimensioningUser Interface
by Tekla Structures Extensions USA
5
  • Dimension
  • stairs
  • pan
  • drawing

PDMS/E3D and Tekla Structures Interoperability: Q&A, collected 8th April 2019

Question: Having issues with the mapping to native sections
by Tekla Extensions - General Design
4.5

Thomas Panels Cold Rolled Sleeved (120)

The Thomas Panels and Profiles Cold Rolled Sleeved connection is used to connect one or two purlins/rails to a rafter/stanchion. It can be used for sleeved joints, butt joints, in the middle of double span purlins/rails, and at gable ends. It should not be used for connections to hip rafters for which a separate joint is available. For simplicity, this help text, and the joint dialogue, will refer only to purlins and rafters, but unless explicitly stated otherwise, these terms should be taken to mean purlins/rails and rafters/stanchions.
by Trimble Solutions UK
0

Thomas Panels Shear Plate to Hip (8)

The Thomas Panels and Profiles Shear Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. to Hip connection is used to create the appropriate items to connect one or two purlins to a hip rafter.
by Trimble Solutions UK
0

Thomas Panels Non-Standard Anti-Sag (57)

The Thomas Panels and Profiles Non-Standard Anti-Sag macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Thomas Panels Eaves Beam to Stanchion (27)

The Thomas Panels and Profiles Eaves Beam to Stanchion connection is used to create a bolted or welded connection between the eaves beam and column/stanchion.
by Trimble Solutions UK
0

Thomas Panels Simple Hip (14)

The Thomas Panels and Profiles Simple Hip connection is provided to form a connection between a single cold rolled purlin and a hip or valley rafter.
by Trimble Solutions UK
0

Thomas Panels Cold Rolled Cleat (101)

The Thomas Panels and Profiles Cold Rolled Cleat joint uses manufacturers trimmer cleats or mezzanine floor cleats to provide connections between various combinations of compatible ‘I’, ‘Z’ and ‘C’ sections.
by Trimble Solutions UK
0

Thomas Panels Non-Continuous Rail (106)

The Thomas Panels and Profiles Non-Continuous Rail system joint is normally used when the specified column face to cladding distance is less than that possible for the standard purlin/rail joint. The joint can handle flush or recessed sheeting lines. A non-standard cleat, is bolted to the column, and bolted to the rail along the standard gauge lines.
by Trimble Solutions UK
0

Thomas Panel Anti-Sag System (53)

The Thomas Panels and Profiles Anti-Sag System macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Thomas Panels Eaves Brace (54)

The Thomas Panels and Profiles Eaves Brace macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define an eaves brace individually between an eaves beam.
by Trimble Solutions UK
0

Thomas Panels cold rolled - Important information

When utilising the Thomas Panels and Profiles (TPP) cold rolled system it is important to take the following information into account.
by Trimble Solutions UK
0

Thomas Panel Apex Ties (9)

The Thomas Panels and Profiles Apex Ties macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Thomas Panels Side Rail Supports (28)

The Thomas Panels and Profiles Side Rail Supports macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Thomas Panels Non-Standard Side Rail (52)

The Thomas Panels and Profiles Non-Standard Side Rail support macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Pages

.