Extensions

Export Layer Line Type Mapping

This tool will make the drawing export procedure easy. This tool will help to control the line types & layers for different objects.In drawing all the objects are divided into different categories like Model objects, text, dimension etc. This tool will assign these objects different layers, line types, & line thickness.How to locate Installation is available at Export Layer and Linetype Settings
by Developer TIN
0

NC Marking Lines Optimizer

This tool convert pop marks locating the holes position in secondary parts , which are marked as dots to horizontal lines & full length contour lines to corner contours .
by Developer TIN
0
  • nc file
  • pop-mark
  • contour mark
  • scribe line
  • marking line

NC Marking Lines Optimizer

This tool convert pop marks locating the holes position in secondary parts , which are marked as dots to horizontal lines & full length contour lines to corner contours .
by Developer TIN
1
  • nc file
  • pop-mark
  • contour mark
  • scribe line
  • marking line

NC Saw Cut Position Updater

Tekla Structures exports NC filefile that contains information gathered from a model and exported to computer numerical controlled fabrication machineryTekla Structures produces NC files in several formats, for example, DSTV. based on actual solid length however some cases the origin should be based on saw origin. Using this tool the actual saw origin is considered and accordningly all other points are changed in NC file.
by Developer TIN
5
  • NC Saw Cut
  • NC Saw Origin
  • NC Saw Cut Origin
  • Saw Cut
  • Saw Origin
  • Saw Cut Origin
  • NC Gross Length
  • Gross Length

NC Saw Cut Position Updater

Tekla Structures exports NC filefile that contains information gathered from a model and exported to computer numerical controlled fabrication machineryTekla Structures produces NC files in several formats, for example, DSTV. based on actual solid length however some cases the origin should be based on saw origin. Using this tool the actual saw origin is considered and accordningly all other points are changed in NC file.
by Developer TIN
0
  • NC Saw Cut
  • NC Saw Origin
  • NC Saw Cut Origin
  • Saw Cut
  • Saw Origin
  • Saw Cut Origin
  • NC Gross Length
  • Gross Length

Neighbor grids and compass marks

Contents   Purpose and descriptionSystem requirementsInstalling Neighbor grids and compass marksUsing Neighbor grids and compass marksApplication propertiesApplication buttons 
by Steel Extensions
0

Built-up Angles

The Built-up Angles plug-in allows user to create the built up angle beam along with spacer plates.
by Developer TIN
0
  • Built Up Angles

Built-up Box Beam

The 'Built-up Box Beam' plug-in allows user to create the built up box beam from plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. / sections.
by Developer TIN
0
  • Built Up Box Beam

Built-up Box Column

The 'Built-up Box Beam' plug-in allows user to create the built up box column from plates / sections.
by Developer TIN
0
  • Built Up Box Beam

Built-up I Beam

The 'Built-up I Beam' plug-in allows user to create the built up I beam from plates / sections.
by Developer TIN
0
  • Built Up I-Beam

Built-up I Column

The 'Built-up I Column' plug-in allows user to create the built up I column from plates / sections.
by Developer TIN
0
  • Built Up I-Beam

Built-up Star Column

The 'Built-up Star Column' plug-in allows user to create the star column from plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. / sections.
by Developer TIN
0
  • Star Column

Built-up Section Name Settings

This tool is to configure the Built-up Sections designation. This designation is written into the assembly of the built-up section which is created by built-up plugins in the same toolbar. The attribute name is “BuiltUpName” and this value retrieved by GetValue(“BuiltUpName”) call.
by Developer TIN
0
  • Built-up Section Name Settings

PEB Anti-sag apex

PEB Anti-sag apex allows you to create anti-sag members for apex (ridge) purlins of a PEB building.
by Developer TIN
0
  • Sag Rod
  • Anti sag
  • Anti-sag
  • Apex
  • Anti sag apex
  • Anti-sag apex
  • Bend sag rod

PEB Base Plate

The PEB Base Platecomponent object that represents a plate welded to a column baseBase plates are used to distribute the concentrated load of the column over a wider area. plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. allows you to create a base
by Developer TIN
0
  • PEB Baseplate
  • PEB Base plate
  • base plate
  • PEB
  • Pre Engineered Buildings
  • PEB Connections
  • PEB Components

PEB End Plate to Flange

The PEB End Platecomponent object that represents a plate welded perpendicular to the end of the component secondary part to Flange plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. allows you to create an end plate(1) part that
by Developer TIN
0
  • PEB End plate to flange
  • PEB Interior column connection
  • PEB Seating
  • PEB Interior column
  • PEB
  • Pre Engineered Buildings
  • PEB Connections
  • PEB Components

PEB End plate to flange rotated

The PEB End platecomponent object that represents a plate welded perpendicular to the end of the component secondary part to flange rotated allows you to create an end plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate.
by Developer TIN
0
  • PEB End plate to flange Rotated

PEB Frames

The PEB Frames applicationpart of Tekla Structures functionality that is developed in order to extend the capability of Tekla Structures but that is not included in the Tekla Structures installation allows you to create PEB frames with a set of pre-set values.
by Developer TIN
0
  • PEB Frames
  • Pre Engineered Building Frame
  • Frames
  • portal
  • gable
  • PEB
  • PEB Components

PEB Knee

The PEB Knee plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. allows you to create the desired knee at the column and rafter (beam) junction.
by Developer TIN
0
  • PEB
  • Pre Engineered Buildings
  • PEB Connections
  • PEB Components
  • PEB Knee
  • PEB Knee Connection
  • Knee Connection
  • PEB Haunch
  • Knee
  • haunch

PEB Member

The PEB Member plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. allows you to create a PEB built-up member with multiple depths (up to 6), multiple webs (up to 5), and multiple flanges (up to 5). You can adjust any part property (web, flange) inside the PEB Member component to meet any PEB requirements.
by Developer TIN
0
  • PEB
  • Pre Engineered Buildings
  • PEB Connections
  • PEB Components
  • PEB Member
  • PEB Builtup
  • Builtup
  • plated member
  • plated beam
  • plated column
  • plated
  • PEB plated Beam

Pages

.