Hello!

Did you know that logged in users can see a lot more content?

Extensions

Edge Reinforcement With Meshes

Contents Purpose and descriptionSystem RequirementsInstalling Edge Reinforcement With MeshesUsing Edge Reinforcement With MeshesEdge Reinforcement With Meshes settings
by CIP extensions
0

Hollow Core Checker

1. Purpose and description Hollow Core Checker is an addition to Tekla Structures extension Model Checker Suite.
by Precast Extensions
0

I-Beam Reinforcement: Picture tab

Use the Picture tab to define types of reinforcing bars and their cover thickness from the IBeam front viewdefault view that is created using the part’s or component’s coordinate system and that shows the part or component from the front directionPart’s front view is a view on part plane created of the part’s front plane..
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Stem mesh tab

Use the Stem meshreinforcement that represents a mesh of steel bars in two perpendicular directionsIn Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars. tab to define meshes in the I-Beam stem.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Top flange tab

Use the Top flange tab to define the meshes in the top flange of the I-Beam. SymmetricThe user can define if the zones will be symmetrical or not.If the user selects symmetrical = Yes, then the zone 1 = zone 5 and zone 2 = zone 4.Zone 4 and zone 5 will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Bottom flange tab

Use the Bottom flange tab to define the meshes in the bottom flange of the I-Beam. Same as TopThe user can define if all the settings on this page are identical with the Top flange tab.If this option is set to Yes, all fields on this tap page will be grayed out.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: U bars tab

Use the U bars tab to define the U bars properties.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement: Attributes tab

Use Attributes tab to define attributes for meshes and u-bars.The grade and bending radius fields are grayed out and filled automatically through the other tab pages.
by Precast Extensions
0
  • I-Beam Reinforcement

I-Beam Reinforcement

The I-Beam Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. can be used to easily reinforce an I-Beam with bend meshes in top and bottom flange, stem meshes,u-bars in top flange and longitudinal bars along the beam. An example of a beam can be seen below.
by Precast Extensions
0
  • I-Beam Reinforcement

Form Face Creator

Purpose and description
by CIP extensions
0

Area Reinforcement: Cover thickness tab

Use the Cover thickness tab to set both meshes cover thicknesses from side and from openings. Properties
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Parameters tab

Use the Parameters tab to set the meshes to create and their parameters like: Size, Grade, Name, Position prefix and Start no and classpart property that groups parts according to identifiers given by the userThe identifiers of classes are usually numbers. Classes can be used for defining the color of parts in the model, for example. Class does not influence the numbering of model objects..
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Longitudinal bars tab

Use the Longitudinal bars tab to set prefered and minimal spacing between the normal longitudinal bars and to set the gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planesIn Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Crossing bars tab

Use the Crossing bars tab to set prefered and minimal spacing between the normal crossing bars and to set the gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planesIn Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines. It is also possible to show grids and grid line labels in drawings, and to modify grid properties in the drawings.It is possible to have more than one grid in a model.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement: Additional bars tab

Use the Additional bars tab to define placing and parameters of additional bars.
by Precast Extensions
0
  • Area Reinforcement

Area Reinforcement

The Area Reinforcement plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. automatizes the process of reinforcing walls and slabs. Itcreates custom rebar meshes that cover the faces with bigger area of the part.These custom meshes may have different distances between bars and also bars of different sizes.
by Precast Extensions
4
  • Area Reinforcement

Excel Import

The Excel Import plugincomponent that is developed using Tekla Open APIPlugin is a .dll file and loaded inside Tekla Structures process.Plugins can be started from the applications and components catalog. allows user to import the data from the first sheet of selected excel file in to the Tekla Structures drawingdrawing that includes the output of the selected information in a model or a part of the model and other information relate
by Trimble Solutions India
5
  • excel import
  • excel link
  • excel

Slab Custom Properties

CUSTOM.SLABplate that represents a concrete structureIn Tekla Structures, a slab is created by picking three or more points.Slab may be part of a floor, for example._CAST_UNIT_POS, which combilnes PROFILE, space character and CAST_UNIT_SERIAL_NUMBER for hollow core slabs (O) and plank slabs (KL).
by Area Finland Service
0
  • BEC
  • slab
  • custom
  • Properties
  • IFC

Beam Custom Properties

CUSTOM.BOTTOM_FLANGE_THICKNESS_1 Works according to the Finnish cast unit prefixes. Supported prefixes are K (reinforced cocrete beam) and JK (prestressed concreteconcrete structure in which internal stresses have been introduced to increase its ability to withstand tension and stress that will be produced by loadsPrestressed concrete is reinforced concrete. In reinforced concrete, prestressing is commonly introduced by tensioning the tendons. beam).
by Area Finland Service
0
  • BEC
  • custom
  • Properties
  • beam
  • Reporting

Wall Custom Properties

Based on Finnish wallplate that represents a structure such as a wall or roof panelIn Tekla Structures, a panel is created by picking two or more points.In cast-in-place concrete the term wall refers to a concept similar to panel. element cast unit prefixes- SKR, Plastered load bearing sandwich- RKR, Plastered non-bearing sandwich- SK, Load bearing inner shell element- RK, Non-bearing inner shell element- S, Load bearing sandwich element
by Area Finland Service
0
  • BEC
  • Wall
  • custom
  • Properties
  • Reporting

Pages

.