Hello!

Did you know that logged in users can see a lot more content?

Extensions

Attribute Importer

Contents Purpose and descriptionInstalling Attribute ImporterUsing Attribute ImporterAttribute Importer settingsCustomizing Attribute ImporterAdditional information
by Precast Extensions
4

PEB Beam To Beam Bent

ContentsPurpose and descriptionSystem requirementsInstalling PEB Beam To Beam BentUsi
by Elwanda Klucik
0

PEB Beam To Beam Shear

ContentsPurpose and descriptionSystem requirementsInstalling PEB Beam To Beam Shear
by Elwanda Klucik
0

PEB Beam To Column Bent

ContentsPurpose and descriptionSystem requirementsInstalling PEB Beam To Column Bent
by Elwanda Klucik
0

PEB Beam To Column Shear

ContentsPurpose and descriptionSystem requirementsInstalling PEB Beam To Column Shear
by Elwanda Klucik
0

Metsec cold rolled - Important information

When utilising the Metsec cold rolled system it is important to take the following information into account.
by Trimble Solutions UK
0

Metsec File Transfer (26)

The Metsec File Transfer macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. will create a transfer file compatible with the Metsec detailing program.
by Trimble Solutions UK
0

Metsec Standard Riveted Channel Rails (37)

The Metsec Standard Riveted Channel Rails macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define individual supports between selected side rails.
by Trimble Solutions UK
0

Metsec Non-Standard Rapid Side Rail (36)

The Metsec Non-Standard Rapid Side Rail macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define individual supports between selected side rails.
by Trimble Solutions UK
0

Metsec Rapid Fit Side Rail (35)

The Metsec Rapid Fit Side Rail macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Metsec Non-Standard Horizontal Cladding Support (34)

The Metsec Non-Standard Horizontal Cladding Support macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Metsec Eaves Brace (24)

The Metsec Eaves Brace macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog.
by Trimble Solutions UK
0

Metsec Simple Hip (14)

The Metsec Simple Hip connection is provided to form a connection between a single cold rolled purlin and a hip or valley rafter.
by Trimble Solutions UK
0

Metsec Shear Plate to Hip (8)

The Metsec Shear Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. to Hip connection is used to create the appropriate items to connect one or two purlins to a hip rafter.
by Trimble Solutions UK
0

Metsec Base Plate (1006)

The Metsec Base Platecomponent object that represents a plate welded to a column baseBase plates are used to distribute the concentrated load of the column over a wider area. detail will add cleats to the bottom end of a column to provide a base for the connection of the column. When used with Metsec sections the detail will use appropriate trimmer cleats by default. You will be required to pick a primary member followed by a point.
by Trimble Solutions UK
0

Metsec Gable Post Shear Plate (105)

The Metsec Gable Post Shear Plate(1) part that represents a flat structure(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.(2) plate that represents a steel structure(2) Plate is mainly used as a connection piece or as a floor plate. is provided as a connection between a C-section or compound C-section column and a gable rafter. However, it may be applied to similar situations.
by Trimble Solutions UK
0

Metsec Cold Rolled Cleat (101)

The Metsec Cold Rolled Cleat joint uses manufacturers trimmer cleats or mezzanine floor cleats to provide connections between various combinations of compatible ‘I’, ‘Z’ and ‘C’ sections.
by Trimble Solutions UK
0

Metsec Mezzanine Floor Tie Bar (38)

The Metsec Mezzanine Floor Tie Bar macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. allows the placing of mezzanine floor tie bars between mezzanine floor beams.
by Trimble Solutions UK
0

Metsec Apex Ties (30)

The Metsec Apex Ties macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define various types of ties between the two purlins of an apex.
by Trimble Solutions UK
0

Metsec Non-Standard Side Rail (32)

The Metsec Non-Standard Side Rail support macrosaved series of actions that includes instructions for a programMacros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.Macros can, for example, be used for creating drawings or reports.Macros are sometimes used to run an application. can be used to define individual supports between selected side rails.
by Trimble Solutions UK
0

Pages

.