Recommendations for Tekla Structures workstations
Tekla Structures hardware recommendations are based on the setups that have been used in testing Tekla Structures and proven to be compatible with Tekla Structures. In addition to setups presented in this document, there are plenty of other suitable setups available. You can use this document as a guidelinedefinition of the distribution and direction of the reinforcing bars in rebar sets
The spacing of the reinforcing bars is measured along the rebar set guideline. The rebar set guideline can be a line, or a polyline that may have corner chamfers.
in choosing new hardware, but bear in mind that equipment and labels presented in this document are not the only suitable hardware setup.
The main criterion when choosing hardware is reliable performance. If you are considering a new hardware component, e.g. graphics card, test it beforehand to ensure it fulfills the requirements. If you are considering purchasing large number of computers for your Tekla Structures users, test and verify the setup first with one or two computers before purchasing a large batch. Tekla Structures is designed to be used on a desktop or laptop computer. Tekla Structures has not been tested for server installations or for virtualization.
Tekla Structures 19.1 is supported in the following operating systems:
32-bit and 64-bit Windows 8
32-bit and 64-bit Windows 7 SP1
32-bit and 64-bit Windows Vista SP2
32-bit Windows XP SP3
Note: Tekla will continue to support Windows XP and Vista until the end of 2013. Tekla will not guarantee that products released from 2014 on would work correctly in XP and Vista, nor that Tekla’s service teams would have the tools available for solving customers’ XP and Vista related questions. You can get more information from this product bulletin: Windows XP and Vista Support in Tekla Structures.
Additional software components
Tekla Structures 19.1 uses Microsoft .NET framework 4.0 and Microsoft Visual C++ 2005 and 2010 Redistributables. These software components are installed automatically by Tekla Structures 19.1 installation package, if needed. However, if you are distributing Tekla Structures 19.1 in a centralized manner using .msi packages, then you need to download these software components from Microsoft’s web site and install them separately before distributing Tekla Structures. Note that the Microsoft .NET Framework 4 Client Profile is insufficient; it must be the full version.
Tekla User Assistance service is the one centralized place that collects Tekla Structures help and support material. You need to have an Internet connection in order to use the Tekla User Assistance service.
In case your internet connection is restricted, you need to allow communications to the Tekla User Assistanceonline help and self-support service for Tekla Structures
Tekla User Assistance includes instructions, support articles, and instructional videos, and it offers a possibility for feedback.
Tekla User Assistance is one of the Tekla Online services.
servers. Please use these Tekla User Assistance server addresses in your firewall settings:
Every component plays a role in the reliability, performance and usability of the computer. The important components for reliability and performance are power supply unit, memory, graphics card and processor. From an ergonomic point of view, the important components are monitor(s), graphics card, keyboard and mouse.
In case you are using Windows 8, make sure your hardware is also Windows 8 compatible to ensure the best user experience.
Power supply unit
The power supply unit (PSU) is one of the few items in the computer that will affect the reliability of your entire system. It's often the most undervalued, under-appreciated component, yet one of the first components to cause failure. Your computer has a specific amount of power that it needs to draw to work. What you need to have in mind when choosing a PSU is the average running load that your PC consumes when running. On the internet there are many power supply calculators that you can use to calculate the running load. We recommend to use a >600W PSU.
Memory requirements depend on the size of the model. Large models require more memory.
An average setup for lighter projects is 32-bit operating system with 3 to 4 GB of RAM.
If you are working with heavier projects, you should consider having a proper PC installation of 64-bit Tekla Structures 19.1 on 64-bit operating system and at least 8 GB of RAM. It’s not unusual to have 16 GB or even more RAM when working with large models.
Note that the supported amount of RAM varies within different 64-bit Windows editions. Please also note that especially with laptops the physical limit of supported RAM modules may be low.
Memory problems are usually difficult to trace. Do not buy the cheapest kind memory, but consider some quality brand.
"The faster, the better" is the rule that applies with processors. In Tekla Structures 19.1 some commands, such as clash check, reference modelmodel which the designer can use as an aid when building another model
A reference model is created in Tekla Structures or in other software and can be inserted to Tekla Structures. The reference model appears together with the model but it is not modified by Tekla Structures. The user can snap to reference model points.
For example, an architectural model, a plant design model, or a heating, ventilating, and air-conditioning (HVAC) model can be a reference model.
handling and .NET applications, are run as a separate process, and therefore a multi-core processor makes your work more efficient. Please note that Tekla Structures does not support Itanium processors.
Tekla Structures renderingprocess of making the model object faces visible
The rendered model object faces can be transparent or non-transparent
uses OpenGL technology, and graphics cards with good hardware support for OpenGL give the best performance. Tekla does not have resources to test all cards on the market, so we have chosen cards based on NVIDIA graphics processor to be our test platform.
In 3D software the importance of good graphics card is highlighted, but up-to-date display drivers are equally as important. You can install the most recent graphics card driver from the manufacturer’s website.
Graphics card manufacturers have slight differences in their OpenGL implementation, and there might be differences in the picture quality even between cards using NVIDIA chips. Therefore it's good to evaluate and test the cards before purchasing. Tekla has developed a special applicationpart of Tekla Structures functionality that is developed in order to extend the capability of Tekla Structures but that is not included in the Tekla Structures installation
for testing and evaluating graphics cards for Tekla Structures purposes. The application is called Steelmark and you can download it from Tekla Warehouseservice for collaboration and for storing and sharing Tekla Structures content
In Tekla Warehouse the content items are stored in collections. Tekla Warehouse includes the Tekla Warehouse Service and the Tekla Warehouse web site.
Tekla Warehouse is one of the Tekla Online services.
: Tekla Structures graphics hardware test.
If you want to share your experiences of different graphics cards, feel free to post your experiences on the Tekla Discussion Forum > Tekla Structures Forums > Hardware & operating system.
24” LCD monitor with full HD support is a good solution both from technical and ergonomic point of view.
Many customers are using two monitors with Tekla Structures as it enhances productivity. Therefore we have included two monitors in the recommendation table. To equip the workstation with two monitors you need a graphics card which is capable to drive two monitors. There is a wide selection of dual monitor capable graphics cards on the market, and many of those can combine good performance with reasonable price.
Some of the Tekla Structures commands require a click on mouse middle button to finish the command. Also zooming, panning and rotating are executed with middle button. Therefore 3-button wheel mouse is needed when working with Tekla Structures.
Tekla Structures also supports the following 3D mice provided by 3Dconnexion: SpaceNavigator, SpaceExplorer, SpacePilot and SpacePilot Pro. 3D mouse can be used besides a regular mouse to enhance zooming, panning and rotating. 3D mouse does not replace the ordinary mouse but it may improve ergonomics and productivity.
To take a 3D mouse into use, you need to install configuration files with which you can configure mouse functionality, depending on the 3D mouse you are using. The configuration files and instructions on how to use them are available in Tekla Warehouse: 3Dconnexion Device Installer.
The principle of plotting in Windows environment is that all applications can use Windows printers, and the printer driver takes care of the rest. Software providers may also bypass the Windows driver interface, and write their own plotter-specific drivers.
Tekla Structures relies on Windows drivers, which are provided by the hardware manufacturer. The quality and the functionality of the driver is therefore dependant of the hardware manufacturer. Because some manufacturers pay more attention to their Windows drivers than others, the quality of the drivers varies quite much. Therefore it is essential to test the plotter with Tekla Structures before purchasing it.
The following table presents two different hardware configurations. The recommendation is mainly for desktop computers, but the same guidelines can be applied also when purchasing laptops.
Recommendations for Tekla Structures license server
These recommendations apply for Tekla Structures License Server 19.
Server that is used as Tekla Structures license server does not have to be very efficient or have maximum performance. Reliability is the keyword. Therefore it's good to remember that server hardware itself is an important issue in terms of reliability, but maintaining the server system is equally as important.
The Flexnet licensing system for Tekla Structures is designed to work in Microsoft Windows XP, Windows Vista, Windows 7, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2 Hyper-V, Hyper-V Server 2008 R2 and VMware Workstation and ESX. Tekla Structures License Server has also been tested and proven to work with Windows 8. Linux or Unix based servers are not supported.
You can install Tekla Structures License Server on normal workstation, but the most reliable solution for serving multiple clients is to use a separate server computer with server operating system. Normal workstations are ok if you have less than 10 licenses to serve but when the amount of licenses to serve is more than 10 licenses,
then it’s definitely recommended to use a proper server computer with server operating system. Servers are designed to operate properly for longer time period without rebooting as often as normal workstation.
RAID (Redundant Array of Independent Disks) is a technology that employs the simultaneous use of two or more hard disk drives to achieve greater level of reliability, performance and/or larger data volume size. Hardware based RAID is a good way of increasing the reliability of your license server.
RAID 1 is a mirrored solution, which can be recommended for Tekla Structures license server. RAID 1 protects data against the loss of one disk, so the data is not lost as long as one of the disks survives. RAID 6 can be considered as high-end solution for license server. It protects the data against the loss of any two of the disks.
Hardware based RAID requires special controllers. SCSI, SATA or SAS controllers can be recommended. Most of the controllers contain some kind of monitoring software which enables for example pop up message if one of the disks in the system fails. That kind of software is very useful in monitoring and maintaining point of view.
You need to have an Internet connection in order to activate, deactivate or repair your Tekla Structures licenses. License activation, deactivation and repairing are the only cases when your license server contacts Tekla’s activation server, and Internet connection on your license server is needed.
Direct communication from the server computer to the Internet needs to be allowed while the license server at your company contacts the activation server at Tekla. The activation communication is done using SOAP over HTTP on the TCP/IP port 80. Your firewall should not block any incoming or outgoing information during the activation. To allow the activation communication, use the activation server address in your firewall settings: http://activate.tekla.com:80/flexnet/services/ActivationService?wsdl
Tekla Structures license server and the Tekla Structures workstations need to be in the same local area network. The workstations need to be able to contact the license server. The internal firewall of your company (for example, Windows Firewall) must allow the communication between the server computer and the Tekla Structures computers. You need to allow the applications tekla.exe and lmgrd.exe to operate through the firewall. The applications are located in the ..\TeklaStructures\License\Server folder. If there is no local area network in your company, we recommend that you install the license server on each computer that Tekla Structures is running on, and activate one license on each computer.
The MAC address of your network adapter where license server is installed should not be changed. In case you are using virtual environment please make sure that you are using static MAC addressing instead of dynamic MAC addressing.
The IP address of your license server should be fixed.
Recommendations for Tekla Structures multiuser server
These recommendations apply for Tekla Structures Multiuser Server 2.3s.
Tekla Structures multiuser server enables several users to work simultaneously in one model.
Tekla Structures multiuser server runs as a service. This means that Tekla Structures multiuser server is always started automatically when you start the computer, and is always available when the computer is running. There is no need to login and no need to start it manually every time you start the computer.
The Server that is used as Tekla Structures multiuser server does not have to be very efficient or to have maximum performance. You can run Tekla Structures multiuser server on the same computer for example with Tekla Structures License Server, as long as you have dedicated different TCP/IP ports for each of the servers.
Tekla Structures multiuser server is tested in Windows XP, Windows Vista, Windows 7, Windows 8, Windows Server 2003, Windows Server 2008 and Windows Server 2012.
The computers on the same multiuser network need to have a unique ID number and identical Subnet mask.
The IP address of your multiuser server should be fixed.