U Inside Connection
2021
Tekla Structures
2020
Tekla Structures
2019i
Tekla Structures
2019
Tekla Structures
2018i
Tekla Structures
2018
Tekla Structures
Environment
Not environment-specific
Contents
Purpose and description
System Requirements
Using the U Inside Connection
U Inside Connection settings
Additional information
Purpose and description
A component to apply a connection to an inside U braceSystem requirements
Tekla Structures.Using the U Inside Connection
To use the component:- From the component catalog select the U_Inside_Connection component.
Image
- Select the parts in the model (2 No.)
Image
U Inside Connection settings
Parameters TabImage
Property | Description |
---|---|
Image
| The Gauge Line dimensions of the profiles are read automatically from the GaugeLines.dat file (in the model, firm or system folder). These can be over written by the user if necessary. |
Image
| Option to specify a set dimension to the end of the brace, or select a factor. (user input number*hole diameter) |
Switch Dummy | Option to switch the poisiton of the dummy part used to help calculate the bolt length. |
Cut Tab
Image
Image
| Option to create a cut on the inside brace to avoid clashing with another brace. Options to specify cut dimensions. |
Image
| Option to specify a distance from the leg root radius that the brace will be cut. |
Additional information
- The Component is expecting U profiles, any other profile will give incorrect results.