Top Plate
2021
Tekla Structures
2020
Tekla Structures
2019i
Tekla Structures
2019
Tekla Structures
2018i
Tekla Structures
2018
Tekla Structures
Environment
Not environment-specific
Top_Plate
Contents
Purpose and descriptionSystem Requirements
Using the Top_Plate
Settings
Additional information
Purpose and description
A component to apply a bent plate connection the top of a towerSystem requirements
Tekla Structures.Using the Top_Plate
To use the component:- From the component catalog select the Top_Plate component.Image
- Select the members in the order shown.Image
Settings
Parameters TabImage
Property | Description |
---|---|
Image
|
The Gauge Line dimensions of the profiles are read automatically from the GaugeLines.dat file (in the model, firm or system folder). These can be over written by the user if necessary. |
Image
|
Option to specify the plate dimensions, corner radius and offset from back of leg. |
Image
|
Option to specify the bolt position dimensions. |
Image
|
Option to create the side plates. |
Additional information
- The direction of the component is controled by which dummy part is selected during the input.
Back to top
Top_Plate_2
Contents
Purpose and Description
Use this component to create a plate on top of the transmission tower.System Requirements
Tekla Structures.Using the Top_Plate_2
To use the component:- From the component catalog select the Top_Plate_2 component.Image
- Select the members in the order shown.Image
Settings
Parameters TabImage
Property | Description |
---|---|
Image
|
The Gauge Line dimensions of the profiles are read automatically from the GaugeLines.dat file (in the model, firm or system folder). These can be over written by the user if necessary. |
Image
|
Option to specify the plate dimensions, corner radius and offset from back of leg. |
Image
|
Option to specify the bolt position dimensions. |
Image
|
Option to create the side plates. |
Additional Information
The direction of the component is controled by which dummy part is selected during the input.Back to top