Single Brace Inside

Contents

Purpose and description
System Requirements
Using the Single Brace Inside
Single Brace Inside settings
Additional information

Purpose and description

System requirements

Using the Single Brace Inside

1. From the component catalog select the Single_Brace_Inside component.

Image

1. Select the parts in the model (2 No.)

Image

Single Brace Inside settings

Image

Property	Description
Image	The Gauge Line dimensions of the profiles are read automatically from the GaugeLines.dat file (in the model, firm or system folder). These can be over written by the user if necessary.
Image	Option to specify a set dimension to the end of the brace, or select a factor. (user input number*hole diameter)
Switch BM	Option to switch the face from which the gauge line is shown. (dummy arrows in the model will show the face). Normally this is from the back of the L profile but in some cases it may be shown from the leg instead, the user can use this option to over ride the Tekla default.

Image

Image	Option to create a cut on the inside brace to avoid clashing with another brace. Options to specify cut dimensions.
Image	Option to specify a distance from the leg root radius that the brace will be cut.

Additional information

• The Component is expecting equal L profiles, any other profile will give incorrect results.