JOMA Joist hanger

Pick main part and secondary part to apply the joist hanger to the beams. The positioning regarding the rotation of the beams should be set to front or back. 

Settings for the joist hanger

1.  Under the picture tab appropriated distance between the beams can be chosen if necessary. This is accessible when type is set to special under the prefix tab, else the default value is set to 5 mm for inner flaps and 0 mm for outer flaps.

2. Under the part tab you can select the size of the joist hanger.
3. The width for the joist hanger is shown, related to beam width.
4. Joist hanger number is generated from size and selections made.
5. You can also select material from database etc under the prefix tab if you put the drop down menu for type to special.