ESSVE Gerber connector

Tekla Structures
Not version-specific
Tekla Structures
Environment
Not environment-specific

Pick main part and secondary part to apply the gerber connector to the beams. The position of the gerber connectors are determined by the picking order. The positioning regarding the rotation of the beams should be set to front or back.

Image
ESSVE_15.png

For more information:

Swe: http://catalog.se.toolstore.com/#/?menu=V70-1-%7CV70-1-117%7CV70-1-130
No: http://catalog.no.toolstore.com/#/?menu=V71-1-%7CV71-1-117%7CV71-1-130
Fi: http://catalog.fi.toolstore.com/#/?menu=V73-3-%7CV73-3-117%7CV73-3-130
Est: http://catalog.ee.toolstore.com/#/?menu=V73-2-%7CV73-2-117%7CV73-2-130

Settings for the gerber connector

1. Select appropriate size of the gerber connector and press load. All values are automatically loaded into dialog.
Image
ESSVE_16.png

2. Product code is generated from size when selections made.
3. No. of nails can be chosen for the specific component. Observe that this is the total amount nails for both sides.
4. Under the pickorder tab appropriated cut for the beams can be chosen if necessary.
5. You can also select material from database etc under the prefix tab if you put the drop down menu for type to special.
Was this helpful?