The Kingspan Apex Tie Bay macrosaved series of actions that includes instructions for a program

Macros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.

Macros can, for example, be used for creating drawings or reports.

Macros are sometimes used to run an application.

can be used to define multiple ties within a bay, between the two Multibeams at an apex.
 

Before and after

Notes

• Any modification of the selected parts will cause this macro to be updated.
• Selected purlins must be facing each other.
• Selected purlins must have the same section depth.
• Both purlin sections must be parallel.
• Roof slopes must have the same pitch.
• When selecting two purlins, the shorter of the two must be selected first.
• When defining the bay you can either pick the rafters (as shown below) or just pick the Multibeams. If you just pick the Multibeams, the shortest Multibeam will define the bay size.

Selection order example

1. Rafter (optional)
2. Rafter (optional)
3. Multibeam
4. Multibeam
5. Click middle mouse button

See also

Kingspan cold rolled - Important information
Kingspan Apex Tie Bay (12) - Parts tab
Kingspan Apex Tie Bay (12) - Parameters tab