Kingspan Panel Joint at Column (11)


Software version: 2020

Last updated September 3, 2020 by Trimble Solutions UK tekla.support.uk@trimble.com

Software version: 
2020
Environment: 
Not environment-specific

Kingspan Panel Joint at Column (11)

The Kingspan Panel Joint at Column macrosaved series of actions that includes instructions for a program

Macros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.

Macros can, for example, be used for creating drawings or reports.

Macros are sometimes used to run an application.

can be used to connect vertical G140/150 sections back to the column face.

Before and after

Tekla Structures model before adding Kingspan Panel Joint at Column (11) Tekla Structures model after adding Kingspan Panel Joint at Column (11)

Notes

  • Any modification of the selected parts will cause this macro to be updated.
  • The standard connection is a single Multicleat which can be bolted or welded to the column face. There is also an option to override the cleat profile, this is used when Kingspan standard Multicleats are not required. Example non-standard cleat profiles: PLT100*10.
  • Primary and secondary members must be parallel.

Selection order example

When selecting a position ensure Snap to nearest points (points on line) Snap to nearest points (points on line) button is turned on.

  1. G140/150
  2. Column
  3. Pick a position along the channel where the autoform should be created

The order to select Tekla Structures model when adding Kingspan Panel Joint at Column (11)

See also

Kingspan cold rolled - Important information
Kingspan Panel Joint at Column (11) - Parts tab
Kingspan Panel Joint at Column (11) - Parameters tab

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet